提交 · 2b32769700f857a8e608a8ee24080833889965b9 · openeuler / Kernel

21 9月, 2019 5 次提交

perf session: Return error code for perf_session__new() function on failure · 6ef81c55

由 Mamatha Inamdar 提交于 8月 22, 2019

This patch is to return error code of perf_new_session function on
failure instead of NULL.

Test Results:

Before Fix:

  $ perf c2c report -input
  failed to open nput: No such file or directory

  $ echo $?
  0
  $

After Fix:

  $ perf c2c report -input
  failed to open nput: No such file or directory

  $ echo $?
  254
  $

Committer notes:

Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: NNageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: NMamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NNageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

6ef81c55

perf probe: Fix to clear tev->nargs in clear_probe_trace_event() · 9e6124d9

由 Masami Hiramatsu 提交于 9月 16, 2019

Since add_probe_trace_event() can reuse tf->tevs[i] after calling
clear_probe_trace_event(), this can make perf-probe crash if the 1st
attempt of probe event finding fails to find an event argument, and the
2nd attempt fails to find probe point.

E.g.
  $ perf probe -D "task_pid_nr tsk"
  Failed to find 'tsk' in this function.
  Failed to get entry address of warn_bad_vsyscall
  Segmentation fault (core dumped)

Committer testing:

After the patch:

  $ perf probe -D "task_pid_nr tsk"
  Failed to find 'tsk' in this function.
  Failed to get entry address of warn_bad_vsyscall
  Failed to get entry address of signal_fault
  Failed to get entry address of show_signal
  Failed to get entry address of umip_printk
  Failed to get entry address of __bad_area_nosemaphore
  <SNIP>
  Failed to get entry address of sock_set_timeout
  Failed to get entry address of tcp_recvmsg
  Probe point 'task_pid_nr' not found.
    Error: Failed to add events.
  $

Fixes: 092b1f0b ("perf probe: Clear probe_trace_event when add_probe_trace_event() fails")
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/156856587999.25775.5145779959474477595.stgit@devnote2Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

9e6124d9

perf probe: Skip same probe address for a given line · 1a375ae7

由 Masami Hiramatsu 提交于 9月 19, 2019

Fix to skip making a same probe address on given line.

Since a DWARF line info contains several entries for one line with
different column, perf probe will make a different probe on same address
if user specifies a probe point by "function:line" or "file:line".

e.g.
 $ perf probe -D kernel_read:8
 p:probe/kernel_read_L8 kernel_read+39
 p:probe/kernel_read_L8_1 kernel_read+39

This skips such duplicated probe addresses.

Committer testing:

  # uname -a
  Linux quaco 5.3.0+ #2 SMP Thu Sep 19 16:13:22 -03 2019 x86_64 x86_64 x86_64 GNU/Linux
  #

Before:

  # perf probe -D kernel_read:8
  p:probe/kernel_read _text+3115191
  p:probe/kernel_read_1 _text+3115191
  #

After:

  # perf probe -D kernel_read:8
  p:probe/kernel_read _text+3115191
  #
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/156886447061.10772.4261569305869149178.stgit@devnote2Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

1a375ae7

perf tools: Fix segfault in cpu_cache_level__read() · 0216234c

由 Jiri Olsa 提交于 9月 12, 2019

We release wrong pointer on error path in cpu_cache_level__read
function, leading to segfault:

  (gdb) r record ls
  Starting program: /root/perf/tools/perf/perf record ls
  ...
  [ perf record: Woken up 1 times to write data ]
  double free or corruption (out)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  (gdb) bt
  #0  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  #1  0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6
  #2  0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6
  #3  0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6
  #4  0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6
  #5  0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc..
  #6  0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac..
  #7  0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz..
  ...

Releasing the proper pointer.

Fixes: 720e98b5 ("perf tools: Add perf data cache feature")
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org: # v4.6+
Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

0216234c

perf tests: Fix static build test · b117b9b4

由 Jiri Olsa 提交于 9月 05, 2019

Disable the potentional shared library features, which breaks static
build if they are enabled and detected: jvmti and vdso libraries.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190905090924.GA1949@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

b117b9b4

20 9月, 2019 26 次提交

perf kvm stat: Set 'trace_cycles' as default event for 'perf kvm record' in powerpc · 2bff2b82

由 Anju T Sudhakar 提交于 7月 18, 2019

Use 'trace_imc/trace_cycles' as the default event for 'perf kvm record'
in powerpc.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-3-anju@linux.vnet.ibm.com
[ Add missing pmu.h header, needed because this patch uses pmu_have_event() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

2bff2b82

perf kvm: Add arch neutral function to choose event for perf kvm record · 124eb5f8

由 Anju T Sudhakar 提交于 7月 18, 2019

'perf kvm record' uses 'cycles'(if the user did not specify any event)
as the default event to profile the guest.

This will not provide any proper samples from the guest incase of
powerpc architecture, since in powerpc the PMUs are controlled by the
guest rather than the host.

Patch adds a function to pick an arch specific event for 'perf kvm
record', instead of selecting 'cycles' as a default event for all
architectures.

For powerpc this function checks for any user specified event, and if
there isn't any it returns invalid instead of proceeding with 'cycles'
event.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-2-anju@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

124eb5f8

perf kvm: Move kvm-stat header file from conditional inclusion to common include section · 8067b3da

由 Anju T Sudhakar 提交于 7月 18, 2019

Move kvm-stat header file to the common include section, and make the
definitions in the header file under the conditional inclusion `#ifdef
HAVE_KVM_STAT_SUPPORT`.

This helps to define other 'perf kvm' related function prototypes in
kvm-stat header file, which may not need kvm-stat support.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-By: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20190718181749.30612-1-anju@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

8067b3da

perf test: Fix spelling mistake "allos" -> "allocate" · ce095c9a

由 Colin Ian King 提交于 9月 11, 2019

There is a spelling mistake in a TEST_ASSERT_VAL message. Fix it.
Signed-off-by: NColin King <colin.king@canonical.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20190911152148.17031-1-colin.king@canonical.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ce095c9a

perf stat: Fix a segmentation fault when using repeat forever · 443f2d5b

由 Srikar Dronamraju 提交于 9月 04, 2019

Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  #5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  #6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  #5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  #6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  #7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a47 ("perf stat: Introduce print_counters function")
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

443f2d5b

perf stat: Reset previous counts on repeat with interval · b63fd11c

由 Srikar Dronamraju 提交于 9月 04, 2019

When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults 		<------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults		<------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch	<------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b ("perf stat: Add interval printing")
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

b63fd11c

perf tools: Move event synthesizing routines to separate .c file · 055c67ed

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

For better grouping, in time we may end up making most of these static,
i.e. generalizing the 'perf record' synthesizing code so that based on
the target it can do the right thing and call the needed synthesizers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9zxxhk40s95pjng9panet16@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

055c67ed

perf memswap: Adopt 'struct u64_swap' from evsel.h · 5cac8ea3

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

As it is not used in evsel.h and is a memory swap struct, so fits better
in memswap.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wvzxu7a5l3m868ywwphrnnqo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

5cac8ea3

perf tools: Move event synthesizing routines to separate header · ea49e01c

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ea49e01c

perf auxtrace: Add missing 'struct perf_sample' forward declaration · bd23ac11

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

Its needed, was being obtained indirectly, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c3k1il7sm28old4e22nwlm7l@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

bd23ac11

perf sched: Add missing event.h include directive · f12be047

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

We use what is defined there, were getting it by luck, indirectly, fix
it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-e1cdt9557ctpvs3jb9c16qe6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

f12be047

perf annotate: Add missing machine.h include directive · 3f79132a

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

We use what is defined there, were getting it by luck, indirectly, fix
it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-56g4jshmktniundmiw7h845k@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

3f79132a

perf hist: Add missing 'struct branch_stack' forward declaration · 3793d4de

由 Arnaldo Carvalho de Melo 提交于 9月 18, 2019

Its needed, was being obtained indirectly, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-srzphk0ehptfn3zqmpkgsi65@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

3793d4de

perf python: Remove debug.h · 5939cacc

由 Arnaldo Carvalho de Melo 提交于 9月 11, 2019

We only need to have the prototype for the eprintf() replacement we use
in the python binding, provide it and avoid dragging debug.h as a
dependency.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s0gy4ur3drmhsknsddwjco59@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

5939cacc

perf callchain: Remove needless event.h include · 9c9e754f

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

All we need is a bunch of struct forward declarations and then add
event.h to the only place that was getting it indirectly via
callchain.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qq2xhyuxcvx5vmxha9otjd8d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

9c9e754f

perf stat: Move perf_stat_synthesize_config() to event.h · b251892d

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

Together with the other synthsizers, and rename it to
perf_event__synthesize_stat_events().

This allows us to stop including event.h in util/stat.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q5ebhrp44txboobs86htu5r9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

b251892d

perf event: Move perf_event__synthesize* to event.h · 27830616

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

Where is the perf_event__handler_t typedef they need, which was the only
reason for header.h to be including event.h, untangle that.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-outjyzh1o29ndcv9lsqyzt87@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

27830616

perf env: Remove needless cpumap.h header · 87ffb6c6

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

Only a 'struct perf_cmp_map' forward allocation is necessary, fix the
places that need the header but were getting it indirectly, by luck,
from env.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3sj3n534zghxhk7ygzeaqlx9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

87ffb6c6

perf symbols: Add missing dso.h header · 09aa3b00

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

This was being obtained only indirectly, by luck.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xeolxwr3iftwfw9kmw26shfe@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

09aa3b00

perf probe: Add missing build-id.h header. · 36f3f450

由 Arnaldo Carvalho de Melo 提交于 9月 10, 2019

It uses things defined in that header and was getting it only
indirectly, thru dso.h, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7u3sf4j5huhi3mqa1q77524b@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

36f3f450

perf tools: Remove util.h from where it is not needed · fb71c86c

由 Arnaldo Carvalho de Melo 提交于 9月 03, 2019

Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

fb71c86c

perf tools: Remove debug.h from places where it is not needed · 4a903c2e

由 Arnaldo Carvalho de Melo 提交于 9月 03, 2019

Pruning a bit more the includes dependency tree. Building this thing on
lots of containers takes time, we better reduce the time per build, each
container is doing 6 builds when clang and clang-devel are available,
and the plan is to do a 'make -C tools/perf build-test' that have many
more.

Also helps when doing normal development, as touching some random file
will have a much reduced chance of triggering lots of rebuilds.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-r889ur2cxe16m91m2a4pl15p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

4a903c2e

perf debug: No need to include ui/util.h · b22bb139

由 Arnaldo Carvalho de Melo 提交于 9月 03, 2019

Nothing from that file is used in util/debug.h, it is only needed in
some places that get it indirectly via including util/debug.h, remove
that entanglement.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hn9v4jdova2nt018fqsjyzun@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

b22bb139

perf tools: Remove needless builtin.h include directives · 8fcbeae4

由 Arnaldo Carvalho de Melo 提交于 9月 03, 2019

Now that builtin.h isn't included by any other header, we can check
where it is really needed, i.e. we can remove it and be sure that it
isn't being obtained indirectly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mn7jheex85iw9qo6tlv26hb2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

8fcbeae4

perf tools: Add PMU event JSON files for ARM Cortex-A76 and, Neoverse N1. · 9e282b73

由 James Clark 提交于 9月 02, 2019

The source of the event codes and description text was the Neoverse N1
technical reference manual at:

  http://infocenter.arm.com/help/topic/com.arm.doc.100616_0301_01_en/neoverse_n1_trm_100616_0301_01_en.pdf

The Cortex-A76 shares the same event IDs as the Neoverse N1 and they
can be viewed at:

  https://static.docs.arm.com/100798/0400/cortex_a76_trm_100798_0400_00_en.pdfSigned-off-by: NJames Clark <james.clark@arm.com>
Cc: "linux-perf-users@vger.kernel.org" <linux-perf-users@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: james clark <james.clark@arm.com>
Cc: nd <nd@arm.com>
Link: http://lore.kernel.org/lkml/20190902160713.1425-2-james.clark@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

9e282b73

perf jvmti: Link against tools/lib/string.o to have weak strlcpy() · 79743bc9

由 Arnaldo Carvalho de Melo 提交于 9月 02, 2019

That is needed in systems such some S/390 distros.

  $ readelf -s /tmp/build/perf/jvmti/jvmti-in.o | grep strlcpy
	452: 0000000000002990   125 FUNC    WEAK   DEFAULT  119 strlcpy
  $

Thanks to Jiri Olsa for fixing up my initial stab at this, I forgot how
Makefiles are picky about spaces versus tabs.
Reported-by: NThomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andreas Krebbel <krebbel@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sergey Melnikov <melnikov.sergey.v@gmail.com>
Link: https://lkml.kernel.org/n/tip-x8vg9sffgb2t1tzqmhkrulh7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

79743bc9

10 9月, 2019 4 次提交

libperf: Adopt perf_cpu_map__max() function · 4256d434

由 Jiri Olsa 提交于 9月 02, 2019

From 'perf stat', so that it can be used from multiple places.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190902121255.536-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

4256d434

libperf: Add missing event.h file to install rule · 227cb129

由 Jiri Olsa 提交于 9月 01, 2019

So that this development header is properly installed and can be found
by tools linking with libperf.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190901124822.10132-5-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

227cb129

perf tests: Add libperf automated test for 'make -C tools/perf build-test' · 9eab951f

由 Jiri Olsa 提交于 9月 01, 2019

Add a libperf build test, that is triggered when one does:

  $ make -C tools/perf build-test
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190901124822.10132-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

9eab951f

perf python: Add missing python/perf.so dependency for libperf · 5079bde7

由 Jiri Olsa 提交于 9月 01, 2019

The python/perf.so compilation needs libperf ready, otherwise it fails:

  $ make python/perf.so JOBS=1
    BUILD:   Doing 'make -j1' parallel build
    GEN      python/perf.so
  gcc: error: /home/jolsa/kernel/linux-perf/tools/perf/lib/libperf.a: No such file or directory

Fixing this with by adding libperf dependency.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190901124822.10132-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

5079bde7

05 9月, 2019 1 次提交

riscv: Add support for libdw · 51bc620b

由 Mao Han 提交于 9月 05, 2019

This patch adds support for DWARF register mappings and libdw registers
initialization, which is used by perf callchain analyzing when
--call-graph=dwarf is given.
Signed-off-by: NMao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: NGreentime Hu <greentime.hu@sifive.com>
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>

51bc620b

01 9月, 2019 4 次提交

perf build: Ignore intentional differences for the x86 insn decoder · 87a682a7

由 Arnaldo Carvalho de Melo 提交于 8月 31, 2019

Since we need to build this in !x86, we need to explicitely use the x86
files, not things like asm/insn.h, so we intentionally differ from the
master copy in the kernel sources, add -I diff directives to ignore just
these differences when checking for drift.
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-9qziqjjt120mmz6kyepka9p7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

87a682a7

perf intel-pt: Use shared x86 insn decoder · 00a26390

由 Josh Poimboeuf 提交于 8月 29, 2019

Now that there's a common version of the decoder for all tools, use it
instead of the local copy.

Also use perf's check-headers.sh script to diff the decoder files to
make sure they remain in sync with the kernel version.  Objtool has a
similar check.

Committer notes:

Had to keep this all pointing explicitely to x86 headers/files, i.e.
instead of asm/isnn.h we had to use ../include/asm/insn.h when the files
were in differemt dirs, or just replace "<asm/foo.h>" with "foo.h".

This way we continue to be able to process perf.data files with Intel PT
traces in distros other than x86.

Also fixed up the awk script paths to use $(srcdir)/tools/arch instead
or relative directories so that we keep detached tarballs (make help |
grep perf) working.

For now the include lines in these headers are being ignored so as not
to flag false reports of kernel/tools out of sync.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

00a26390

perf intel-pt: Remove inat.c from build dependency list · f1da0a6c

由 Josh Poimboeuf 提交于 8月 29, 2019

intel-pt-insn-decoder.c includes inat.c directly, so it already has an
implicit dependency on inat.c. The Build file dependency is redundant.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/53776d6d29bc9eceb571d52df8fa32250c58a0f3.1567118001.git.jpoimboe@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

f1da0a6c

perf: Update .gitignore file · 58993fb2

由 Josh Poimboeuf 提交于 8月 29, 2019

After a "make tools/perf", git reports the following untracked files:

  tools/perf/feature/
  tools/perf/fixdep
  tools/perf/libtraceevent-dynamic-list

Add these generated files to perf's .gitignore file.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/03acbc6c2fbc72054861f6c301875db75db33030.1567118001.git.jpoimboe@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

58993fb2

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功