When sending packet to destination that was not resolved yet
via path query, the driver keeps the skb and tries to re-send it
again when the path is resolved.

But when re-sending via dev_queue_xmit the kernel doesn't call
to dev_hard_header, so IPoIB needs to keep 20 bytes in the skb
and to put the destination address inside them.

In that way the dev_start_xmit will have the correct destination,
and the driver won't take the destination from the skb->data, while
nothing exists there, which causes to packet be be dropped.

The test flow is:
1. Run the SM on remote node,
2. Restart the driver.
4. Ping some destination,
3. Observe that first ICMP request will be dropped.

Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Tested-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Makefile and Kconfig changes for enabling bnxt_re compilation
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch introduces the RoCE driver for the Broadcom
NetXtreme-E 10/25/40/50G RoCE HCAs.

The RoCE driver is a two part driver that relies on the parent
bnxt_en NIC driver to operate.  The changes needed in the bnxt_en
driver have already been incorporated via Dave Miller's net tree
into the mainline kernel.

The vendor official git repository for this driver is available
on github as:
https://github.com/Broadcom/linux-rdma-nxt/Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Port and ACL information must be configured before an initiator
logs in.  Make it possible to configure this information before
a subnet prefix has been assigned to a port by not only accepting
GIDs as target port and initiator port names but by also accepting
port GUIDs.

Add a 'priv' member to struct se_wwn to allow target drivers to
associate their own data with struct se_wwn.
Reported-by: NDoug Ledford <dledford@redhat.com>
References: http://www.spinics.net/lists/linux-rdma/msg39505.htmlSigned-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This test looks reverted.
We should log an error message only if 'ib_attach_mcast()' fails.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The function ipoib_mcast_start_thread/ipoib_ib_dev_up always return zero.
As such, in the function ipoib_open, err_stop will never be reached.
So remove this err_stop and change the return type of the function
ipoib_mcast_start_thread/ipoib_ib_dev_up to void.
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set maj_err and min_err in i40iw_sc_cqp_create so that it
returns correct values for all return cases. This also
addresses an uninitialized variable warning for maj_err and
min_err in i40iw_create_cqp.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reported-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Commit f0626710 ("RDMA: Update workqueue usage") removed
content of qib_qsfp_deinit(...) and left it empty.

This patch deletes all leftovers of that function.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As Jason suggested, we have 4 elements for per port arrays,
it's better to have a separate structure to represent them.

It simplifies code a bit, ~ 30 lines of code less :)
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ipoib_ib_dev_down/ipoib_ib_dev_stop return zero unconditionally
and the callers never check the returned values,
change the return type to void and remove the redundant return values.
Reviewed-by: NShan Hai <shan.hai@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The debug printk was indented more than it should have been and we
can remove an unnecessary line break.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When allocating a port number for binding to a rdma_id, assuming the
allocation is not for a specific port, the rule is to allow only ports
that were not in use before by any other rdma_id.

This condition is too strong to achieve the goal of a unique 5 tuple
rdma_id. Instead, we can compare current rdma_id with other rdma_id for
difference in one of destination port, source address and destination
address to allow port reuse.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Print debug messages to the kernel log to add more
information about RDMA_CM events that indicate an error.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the function ipoib_set_dev_features, the returned value is always 0.
As such, it is not necessary to check the returned value.
This is not a bug. It is a trivial problem.
Reviewed-by: NGuanglei Li <guanglei.li@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Trivial fix to spelling mistake in isert_warn message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Endpoints that are aborting can have already dereferenced the
cm_id and set ep->com.cm_id to NULL.  So guard against that in
dump_ep() and dump_qp().

Also create a common function for setting up ip address pointers
since the same logic is needed in several places.
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Print the invalid port number to ease troubleshooting.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the unused qp_type parameter from function's args
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When we try to resolve a dest addr, if we don't give src addr,
cma core will try to resolve to our source ib device automatically.
The current logic only checks if a given port has the same
subnet_prefix as our dest, which is not enough if we use default
well known subnet_prefix on our active port, as it will be the same
as the subnet_prefix on inactive ports and we might match against
an inactive port by accident.  To resolve this, we should also check
if port is active before we resolve it as a suitable src address for
a given dest.
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Export function for rdma_cm, patch for rdma_cm to follow.
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We need a port state cache in ib_core, later we will use in rdma_cm.
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: NMichael Wang <yun.wang@profitbricks.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function
belong to different work queues, they can run in parallel.
In this case if ipoib_cm_tx_reap calls list_del and release the
lock, ipoib_cm_tx_start may acquire it and call list_del_init
on the already deleted object.
Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem.

Fixes: 839fcaba ("IPoIB: Connected mode experimental support")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to resolve a situation where a few process delete
the same list element in sequence and cause panic, list_del
is replaced with list_del_init. In this case if the first
process that calls list_del releases the lock before acquiring
it again, other processes who can acquire the lock will call
list_del_init.

Fixes: b63b70d8 ("IPoIB: Use a private hash table for path lookup")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If a receive request has not been posted to the work queue, the incoming
message is rejected and the peer will receive a receiver-not-ready (RNR)
error. In IPoIB, IB_WC_RNR_RETRY_EXC_ERR error is part of the life cycle
therefore ipoib_cm_handle_tx_wc function will print to debug instead
of warnings.
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add a detailed return code to dev_queue_xmit function when
calling to requeue packet via __skb_dequeue.
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ipoib_vlan_add function calls rtnl_unlock after free_netdev,
rtnl_unlock not only releases the lock, but also calls netdev_run_todo.
The latter function browses the net_todo_list array and completes the
unregistration of all its net_device instances. If we call free_netdev
before rtnl_unlock, then netdev_run_todo call over the freed device causes
panic.
To fix, move rtnl_unlock call before free_netdev call.

Fixes: 9baa0b03 ("IB/ipoib: Add rtnl_link_ops support")
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When calling set_mode from sys/fs, the call flow locks the sys/fs lock
first and then tries to lock rtnl_lock (when calling ipoib_set_mod).
On the other hand, the rmmod call flow takes the rtnl_lock first
(when calling unregister_netdev) and then tries to take the sys/fs
lock. Deadlock a->b, b->a.

The problem starts when ipoib_set_mod frees it's rtnl_lck and tries
to get it after that.

    set_mod:
    [<ffffffff8104f2bd>] ? check_preempt_curr+0x6d/0x90
    [<ffffffff814fee8e>] __mutex_lock_slowpath+0x13e/0x180
    [<ffffffff81448655>] ? __rtnl_unlock+0x15/0x20
    [<ffffffff814fed2b>] mutex_lock+0x2b/0x50
    [<ffffffff81448675>] rtnl_lock+0x15/0x20
    [<ffffffffa02ad807>] ipoib_set_mode+0x97/0x160 [ib_ipoib]
    [<ffffffffa02b5f5b>] set_mode+0x3b/0x80 [ib_ipoib]
    [<ffffffff8134b840>] dev_attr_store+0x20/0x30
    [<ffffffff811f0fe5>] sysfs_write_file+0xe5/0x170
    [<ffffffff8117b068>] vfs_write+0xb8/0x1a0
    [<ffffffff8117ba81>] sys_write+0x51/0x90
    [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b

    rmmod:
    [<ffffffff81279ffc>] ? put_dec+0x10c/0x110
    [<ffffffff8127a2ee>] ? number+0x2ee/0x320
    [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0
    [<ffffffff8127cc04>] ? vsnprintf+0x484/0x5f0
    [<ffffffff8127b550>] ? string+0x40/0x100
    [<ffffffff814fe323>] wait_for_common+0x123/0x180
    [<ffffffff81060250>] ? default_wake_function+0x0/0x20
    [<ffffffff8119661e>] ? ifind_fast+0x5e/0xb0
    [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20
    [<ffffffff811f2e68>] sysfs_addrm_finish+0x228/0x270
    [<ffffffff811f2fb3>] sysfs_remove_dir+0xa3/0xf0
    [<ffffffff81273f66>] kobject_del+0x16/0x40
    [<ffffffff8134cd14>] device_del+0x184/0x1e0
    [<ffffffff8144e59b>] netdev_unregister_kobject+0xab/0xc0
    [<ffffffff8143c05e>] rollback_registered+0xae/0x130
    [<ffffffff8143c102>] unregister_netdevice+0x22/0x70
    [<ffffffff8143c16e>] unregister_netdev+0x1e/0x30
    [<ffffffffa02a91b0>] ipoib_remove_one+0xe0/0x120 [ib_ipoib]
    [<ffffffffa01ed95f>] ib_unregister_device+0x4f/0x100 [ib_core]
    [<ffffffffa021f5e1>] mlx4_ib_remove+0x41/0x180 [mlx4_ib]
    [<ffffffffa01ab771>] mlx4_remove_device+0x71/0x90 [mlx4_core]

Fixes: 862096a8 ("IB/ipoib: Add more rtnl_link_ops callbacks")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes Deadlock while executing ipoib_vlan_delete.

The function takes the vlan_rwsem semaphore and calls
unregister_netdevice. The later function calls
ipoib_mcast_stop_thread that cause workqueue flush.

When the queue has one of the ipoib_ib_dev_flush_xxx events,
a deadlock occur because these events also tries to catch the
same vlan_rwsem semaphore.

To fix, unregister_netdevice should be called after releasing
the semaphore.

Fixes: cbbe1efa ("IPoIB: Fix deadlock between ipoib_open() and child interface create")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When changing the connection mode, the ipoib_set_mode function
did not check if the previous connection mode equals to the
new one. This commit adds the required check and return 0 if the new
mode equals to the previous one.

Fixes: 839fcaba ("IPoIB: Connected mode experimental support")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In datagram mode, the IB UD (Unreliable Datagram) transport is used
so the MTU of the interface is equal to the IB L2 MTU minus the
IPoIB encapsulation header. Any request to change the MTU value
above the maximum range will change the MTU to the max allowed, but
will not show any warning message. An ipoib_warn is issued in such
cases, letting the user know that even though the value is legal,
it can't be currently applied.
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace BUG() with BUG_ON() using coccinelle
Signed-off-by: NShyam Saini <mayhs11saini@gmail.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Elsewhere the sin_family field holds a value with a name of the form
AF_..., so it seems reasonable to do so here as well.  Also the values
of PF_INET and AF_INET are the same.

The semantic patch that makes this change is as follows:

//</smpl>
@@
struct sockaddr_in sip;
@@

(
sip.sin_family ==
- PF_INET
+ AF_INET
|
sip.sin_family !=
- PF_INET
+ AF_INET
|
sip.sin_family =
- PF_INET
+ AF_INET
)
//</smpl>
Signed-off-by: NShyam Saini <mayhs11saini@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The RDMA core uses ib_pack() to convert from unpacked CPU structs
to on-the-wire bitpacked structs.

This process requires that 1 bit fields are declared as u8 in the
unpacked struct, otherwise the packing process does not read the
value properly and the packed result is wired to 0. Several
places wrongly used int.

Crucially this means the kernel has never, set reversible
correctly in the path record request. It has always asked for
irreversible paths even if the ULP requests otherwise.

When the kernel is used with a SM that supports this feature, it
completely breaks communication management if reversible paths are
not properly requested.

The only reason this ever worked is because opensm ignores the
reversible bit.

Cc: stable@vger.kernel.org
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Simplify function and sub-function flow of QP creation and destruction.
This also serves as a preparation for SRQ and iWARP support.
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Reviewed-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In AER recovery, pci_error_handlers.link_reset() is never called,
drop it now.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In AER recovery, pci_error_handlers.link_reset() is never called,
drop it now.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>