Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 09 8月, 2007 16 次提交
    • I
      sched: remove rq_clock() · 2ab81159
      由 Ingo Molnar 提交于 
      remove the now unused rq_clock() function.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2ab81159
    • I
      sched: eliminate rq_clock() use · a8e504d2
      由 Ingo Molnar 提交于 
      eliminate rq_clock() use by changing it to:

   update_rq_clock(rq)
   now = rq->clock;

identity transformation - no change in behavior.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a8e504d2
    • I
      sched: add [__]update_rq_clock(rq) · b04a0f4c
      由 Ingo Molnar 提交于 
      add the [__]update_rq_clock(rq) functions. (No change in functionality,
just reorganization to prepare for elimination of the heavy 64-bit
timestamp-passing in the scheduler.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b04a0f4c
    • P
      sched: fix bug in balance_tasks() · a4ac01c3
      由 Peter Williams 提交于 
      There are two problems with balance_tasks() and how it used:

1. The variables best_prio and best_prio_seen (inherited from the old
move_tasks()) were only required to handle problems caused by the
active/expired arrays, the order in which they were processed and the
possibility that the task with the highest priority could be on either.
  These issues are no longer present and the extra overhead associated
with their use is unnecessary (and possibly wrong).

2. In the absence of CONFIG_FAIR_GROUP_SCHED being set, the same
this_best_prio variable needs to be used by all scheduling classes or
there is a risk of moving too much load.  E.g. if the highest priority
task on this at the beginning is a fairly low priority task and the rt
class migrates a task (during its turn) then that moved task becomes the
new highest priority task on this_rq but when the sched_fair class
initializes its copy of this_best_prio it will get the priority of the
original highest priority task as, due to the run queue locks being
held, the reschedule triggered by pull_task() will not have taken place.
  This could result in inappropriate overriding of skip_for_load and
excessive load being moved.

The attached patch addresses these problems by deleting all reference to
best_prio and best_prio_seen and making this_best_prio a reference
parameter to the various functions involved.

load_balance_fair() has also been modified so that this_best_prio is
only reset (in the loop) if CONFIG_FAIR_GROUP_SCHED is set.  This should
preserve the effect of helping spread groups' higher priority tasks
around the available CPUs while improving system performance when
CONFIG_FAIR_GROUP_SCHED isn't set.
Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a4ac01c3
    • I
      sched: document nice levels · aea25401
      由 Ingo Molnar 提交于 
      Document the design thinking behind nice levels.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      aea25401
    • A
      sched: remove binary sysctls from kernel.sched_domain · e0361851
      由 Alexey Dobriyan 提交于 
      kernel.sched_domain hierarchy is under CTL_UNNUMBERED and thus
unreachable to sysctl(2). Generating .ctl_number's in such situation is
not useful.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e0361851
    • I
      sched: delta_exec accounting fix · fd8bb43e
      由 Ingo Molnar 提交于 
      small delta_exec accounting fix: increase delta_exec and increase
sum_exec_runtime even if the task is not on the runqueue anymore.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fd8bb43e
    • I
      sched: clean up delta_mine · c5dcfe72
      由 Ingo Molnar 提交于 
      cleanup: delta_mine is an unsigned value.

no code impact:

   text    data     bss     dec     hex filename
   27823    2726      16   30565    7765 sched.o.before
   27823    2726      16   30565    7765 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c5dcfe72
    • I
      sched: schedule() speedup · 8e717b19
      由 Ingo Molnar 提交于 
      speed up schedule(): share the 'now' parameter that deactivate_task()
was calculating internally.

( this also fixes the small accounting window between the deactivate
  call and the pick_next_task() call. )
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8e717b19
    • I
      sched: uninline rq_clock() · 7bfd0485
      由 Ingo Molnar 提交于 
      uninline rq_clock() to save 263 bytes of code:

   text    data     bss     dec     hex filename
   39561    3642      24   43227    a8db sched.o.before
   39298    3642      24   42964    a7d4 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7bfd0485
    • J
      sched: mark print_cfs_stats static · 291ae5a1
      由 Josh Triplett 提交于 
      sched_fair.c defines print_cfs_stats, and sched_debug.c uses it, but sched.c
includes both sched_fair.c and sched_debug.c, so all the references to
print_cfs_stats occur in the same compilation unit.  Thus, mark
print_cfs_stats static.

Eliminates a sparse warning:
warning: symbol 'print_cfs_stats' was not declared. Should it be static?
Signed-off-by: NJosh Triplett <josh@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      291ae5a1
    • U
      sched: clean up sched_getaffinity() · 9531b62f
      由 Ulrich Drepper 提交于 
      here's another tiny cleanup.  The generated code is not affected (gcc is
smart enough) but for people looking over the code it is just irritating
to have the extra conditional.
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9531b62f
    • T
      sched: mention CONFIG_SCHED_DEBUG in documentation · 5f5d3aa1
      由 Thomas Voegtle 提交于 
      a little hint to switch on CONFIG_SCHED_DEBUG should be given.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5f5d3aa1
    • P
      sched: simplify move_tasks() · 43010659
      由 Peter Williams 提交于 
      The move_tasks() function is currently multiplexed with two distinct
capabilities:

1. attempt to move a specified amount of weighted load from one run
queue to another; and
2. attempt to move a specified number of tasks from one run queue to
another.

The first of these capabilities is used in two places, load_balance()
and load_balance_idle(), and in both of these cases the return value of
move_tasks() is used purely to decide if tasks/load were moved and no
notice of the actual number of tasks moved is taken.

The second capability is used in exactly one place,
active_load_balance(), to attempt to move exactly one task and, as
before, the return value is only used as an indicator of success or failure.

This multiplexing of sched_task() was introduced, by me, as part of the
smpnice patches and was motivated by the fact that the alternative, one
function to move specified load and one to move a single task, would
have led to two functions of roughly the same complexity as the old
move_tasks() (or the new balance_tasks()).  However, the new modular
design of the new CFS scheduler allows a simpler solution to be adopted
and this patch addresses that solution by:

1. adding a new function, move_one_task(), to be used by
active_load_balance(); and
2. making move_tasks() a single purpose function that tries to move a
specified weighted load and returns 1 for success and 0 for failure.

One of the consequences of these changes is that neither move_one_task()
or the new move_tasks() care how many tasks sched_class.load_balance()
moves and this enables its interface to be simplified by returning the
amount of load moved as its result and removing the load_moved pointer
from the argument list.  This helps simplify the new move_tasks() and
slightly reduces the amount of work done in each of
sched_class.load_balance()'s implementations.

Further simplification, e.g. changes to balance_tasks(), are possible
but (slightly) complicated by the special needs of load_balance_fair()
so I've left them to a later patch (if this one gets accepted).

NB Since move_tasks() gets called with two run queue locks held even
small reductions in overhead are worthwhile.

[ mingo@elte.hu ]

this change also reduces code size nicely:

   text    data     bss     dec     hex filename
   39216    3618      24   42858    a76a sched.o.before
   39173    3618      24   42815    a73f sched.o.after
Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      43010659
    • I
      sched: reorder update_cpu_load(rq) with the ->task_tick() call · f1a438d8
      由 Ingo Molnar 提交于 
      Peter Williams suggested to flip the order of update_cpu_load(rq) with
the ->task_tick() call. This is a NOP for the current scheduler (the
two functions are independent of each other), ->task_tick() might
create some state for update_cpu_load() in the future (or in PlugSched).
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f1a438d8
    • I
      sched: batch sleeper bonus · 0915c4e8
      由 Ingo Molnar 提交于 
      batch up the sleeper bonus sum a bit more. Anything below
sched-granularity is too small to make a practical difference
anyway.

this optimization reduces the math in high-frequency scheduling
scenarios.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0915c4e8
  3. 07 8月, 2007 9 次提交
  5. 06 8月, 2007 3 次提交
  7. 05 8月, 2007 5 次提交
  9. 04 8月, 2007 7 次提交
    • S
      [SCSI] aacraid: prevent panic on adapter resource failure · 2b053729
      由 Salyzyn, Mark 提交于 
      If the driver fails to allocate the contiguous (DMAable) memory for
system reasons, we fail to load the instance, but then we try to free
the <nul> allocation in the cleanup code and we get a panic in
pci_free_consistent(). This is reported against an older kernel, hope
this is relevant for latest/greatest.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      2b053729
    • B
      [SCSI] aha152x: use data accessors and !use_sg cleanup · 2338545a
      由 Boaz Harrosh 提交于 
      And finally this is the regular !use_sg cleanup
and use of data accessors.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      2338545a
    • B
      [SCSI] aha152x: Fix check_condition code-path · 45333ffa
      由 Boaz Harrosh 提交于 
      check_condition code-path was similar but more
complicated to Reset. It went like this:

  1. extra space was allocated at aha152x_scdata for mirroring
    scsi_cmnd members.
  2. At aha152x_internal_queue() every not check_condition
    (REQUEST_SENSE) command was copied to above members in
    case of error.
  3. At busfree_run() in the DONE_CS phase if a Status of
    SAM_STAT_CHECK_CONDITION was detected. The command was
    re-queued Internally using aha152x_internal_queue(,,check_condition,)
    The old command members are over written with the
    REQUEST_SENSE info.
  4. At busfree_run() in the DONE_CS phase again. If it is a
    check_condition command, info was restored from mirror
    made at first call to aha152x_internal_queue() (see 2)
    and the command is completed.

What I did is:

  1. Allocate less space in aha152x_scdata only for the 16-byte
    original command. (which is actually not needed by scsi-ml
    anymore at this stage. But this is to much knowledge of scsi-ml)
  2. If Status == SAM_STAT_CHECK_CONDITION, then like before
     re-queue a REQUEST_SENSE command. But only now save original
     command members. (Less of them)
  3. In aha152x_internal_queue(), just like for Reset, use the
    check_condition hint to set differently the working members.
    execute the command.
  4. At busfree_run() in the DONE_CS phase again. restore needed
     members.

While at it. This patch fixes a BUG. Old code when sending
a REQUEST_SENSE for a failed command. Would than return with
cmd->resid == 0 which was the status of the REQUEST_SENSE.
The failing command resid was lost. And when would resid
be interesting if not on a failing command?
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      45333ffa
    • B
      [SCSI] aha152x: Clean Reset path · 66acdb03
      由 Boaz Harrosh 提交于 
      What Reset code was doing:  Save command's important/dangerous
Info on stack. NULL those members from scsi_cmnd.
Issue a Reset. wait for it to finish than restore members
and return.

What I do is save or NULL nothing. But use the "resetting"
hint in aha152x_internal_queue() to NULL out working members
and leave struct scsi_cmnd alone.

The indent here looks funny but it will change/drop in last
patch and it is clear this way what changed.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      66acdb03
    • B
      [SCSI] aha152x: preliminary fixes and some comments · 0ceb4798
      由 Boaz Harrosh 提交于 
        hunk by hunk:
  - CHECK_CONDITION is what happens to cmnd->status >> 1
    or after status_byte() macro. But here it is used
    directly on status which means 0x1 which is an undefined
    bit in the standard. And is a status that will never
    return from a target.

  - in busfree_run at the DONE_SC phase we have 3 distinct
    operation:
	1-if(DONE_SC->SCp.phase & check_condition)
          The REQUEST_SENSE command return.
          - Restore original command
	  - Than continue to operation 3.
	2-if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION)
          A regular command returned with a status.
	  - Internally re-Q a REQUEST_SENSE.
	  - Do not do operation 3.
	3-
	  - Complete the command and return it to scsi-ml
     So the 0x2 in both these operations (1,2) means the scsi
     check-condition status, hence SAM_STAT_CHECK_CONDITION

  - Here the code asks about !(DONE_SC->SCp.Status & not_issued)
    but "not_issued" is an enum belonging to the "phase" member
    and not to the Status returned from target. The reason this
    works is because not_issued==1 and Also CHECK_CONDITION==1
    (remember from hunk 1). So actually the code was asking
    !(DONE_SC->SCp.Status & CHECK_CONDITION). Which means
    "Has the status been read from target yet?"
    Staus is read at status_run(). "not_issued" is
    cleared in seldo_run() which is usually earlier than
    status_run().

  So this patch does nothing as far as assembly is concerned
  but it does let the reader understand what is going on.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      0ceb4798
    • B
      [SCSI] aha152x: use bounce buffer · b1ee0795
      由 Boaz Harrosh 提交于 
      Cause highmem buffers to be bounced to low memory until this
driver supports highmem addresses.  Otherwise it just oopses
on NULL buffer addresses.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      b1ee0795
    • B
      [SCSI] aha152x: fix debug mode symbol conflict · 50535df3
      由 Boaz Harrosh 提交于 
      The symbol <debug_locks> conflicts with the rather global one in
include/linux/locks.h.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      50535df3