This extends the support for drivers that rebuilds IEs in the
FW (same as with HT/VHT).
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.20feaabfb484.I886252639604c8e3e84b8ef97962f1b0e4beec81@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The current NL80211_EXT_FEATURE_BEACON_PROTECTION feature flag
requires both AP and client support, add a new one called
NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT that enables only
support in client (and P2P-client) modes.

Link: https://lore.kernel.org/r/20200420140559.6ba704053a5a.Ifeb869fb0b48e52fe0cb9c15572b93ac8a924f8d@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

For DPP, there's a need to receive multicast action frames,
but many drivers need a special filter configuration for this.

Support announcing from userspace in the management registration
that multicast RX is required, with an extended feature flag if
the driver handles this.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Reviewed-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Extend cfg80211_rx_unprot_mlme_mgmt() to cover indication of unprotected
Beacon frames in addition to the previously used Deauthentication and
Disassociation frames. The Beacon frame case is quite similar, but has
couple of exceptions: this is used both with fully unprotected and also
incorrectly protected frames and there is a rate limit on the events to
avoid unnecessary flooding netlink events in case something goes wrong.
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200401142548.6990-1-jouni@codeaurora.org
[add missing kernel-doc]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The nested policy here should be established using the
NLA_POLICY_NESTED() macro so the length is properly
filled in.

Cc: stable@vger.kernel.org
Fixes: 81e54d08 ("cfg80211: support FTM responder configuration/statistics")
Link: https://lore.kernel.org/r/20200412004029.9d0722bb56c8.Ie690bfcc4a1a61ff8d8ca7e475d59fcaa52fb2da@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The new opmode notification used this attribute with a u8, when
it's documented as a u32 and indeed used in userspace as such,
it just happens to work on little-endian systems since userspace
isn't doing any strict size validation, and the u8 goes into the
lower byte. Fix this.

Cc: stable@vger.kernel.org
Fixes: 466b9936 ("cfg80211: Add support to notify station's opmode change to userspace")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200325090531.be124f0a11c7.Iedbf4e197a85471ebd729b186d5365c0343bf7a8@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The long if chain of interface types is hard to read,
especially now with the additional condition after it.
Use a switch statement to clarify this code.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200320113834.2c51b9e8e341.I3fa5dc3f7d3cb1dbbd77191d764586f7da993f3f@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers that trigger roaming need to know the lifetime of the configured
PMKSA for deciding whether to trigger the full or PMKSA cache based
authentication. The configured PMKSA is invalid after the PMK lifetime
has expired and must not be used after that and the STA needs to
disassociate if the PMK expires. Hence the STA is expected to refresh
the PMK with a full authentication before this happens (e.g., when
reassociating to a new BSS the next time or by performing EAPOL
reauthentication depending on the AKM) to avoid unnecessary
disconnection.

The PMK reauthentication threshold is the percentage of the PMK lifetime
value and indicates to the driver to trigger a full authentication roam
(without PMKSA caching) after the reauthentication threshold time, but
before the PMK timer has expired. Authentication methods like SAE need
to be able to generate a new PMKSA entry without having to force a
disconnection after this threshold timeout. If no roaming occurs between
the reauthentication threshold time and PMK lifetime expiration,
disassociation is still forced.

The new attributes for providing these values correspond to the dot11
MIB variables dot11RSNAConfigPMKLifetime and
dot11RSNAConfigPMKReauthThreshold.

This type of functionality is already available in cases where user
space component is in control of roaming. This commit extends that same
capability into cases where parts or all of this functionality is
offloaded to the driver.
Signed-off-by: NVeerendranath Jakkam <vjakkam@codeaurora.org>
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200312235903.18462-1-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Sometimes, userspace is able to detect that a peer silently lost its
state (like, if the peer reboots). wpa_supplicant does this for IBSS-RSN
by registering for auth/deauth frames, but when it detects this, it is
only able to remove the encryption keys of the peer and close its port.

However, the kernel also hold other state about the station, such as BA
sessions, probe response parameters and the like.  They also need to be
resetted correctly.

This patch adds the NL80211_EXT_FEATURE_DEL_IBSS_STA feature flag
indicating the driver accepts deleting stations in IBSS mode, which
should send a deauth and reset the state of the station, just like in
mesh point mode.
Signed-off-by: NNicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20200305135754.12094-1-cavallar@lri.fr
[preserve -EINVAL return]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Pass the AP's HE operation element to the driver.
Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-18-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add support for requesting that the ranging measurement will use
the trigger-based / non trigger-based flow instead of the EDCA based
flow.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support for disabling pre-auth rx over the nl80211 control
port for mac80211.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200312091055.54257-3-markus.theil@tu-ilmenau.de
[fix indentation slightly, squash feature enablement]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If the nl80211 control port is used before this patch, pre-auth frames
(0x88c7) are send to userspace uncoditionally. While this enables userspace
to only use nl80211 on the station side, it is not always useful for APs.
Furthermore, pre-auth frames are ordinary data frames and not related to
the control port. Therefore it should for example be possible for pre-auth
frames to be bridged onto a wired network on AP side without touching
userspace.

For backwards compatibility to code already using pre-auth over nl80211,
this patch adds a feature flag to disable this behavior, while it remains
enabled by default. An additional ext. feature flag is added to detect this
from userspace.

Thanks to Jouni for pointing out, that pre-auth frames should be handled as
ordinary data frames.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200312091055.54257-2-markus.theil@tu-ilmenau.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add missing attribute validation for NL80211_ATTR_OPER_CLASS
to the netlink policy.

Fixes: 1057d35e ("cfg80211: introduce TDLS channel switch commands")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add missing attribute validation for beacon report scanning
to the netlink policy.

Fixes: 1d76250b ("nl80211: support beacon report scanning")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add missing attribute validation for critical protocol fields
to the netlink policy.

Fixes: 5de17984 ("cfg80211: introduce critical protocol indication from user-space")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID RTSCTS control
configuration to enable/disable through the
NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-5-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID AMPDU control
configuration to enable/disable aggregation through the
NL80211_TID_CONFIG_ATTR_AMPDU_CTRL attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-4-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID retry configuration
through the NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes. This TID specific
retry configuration will have more precedence than phy level
configuration.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-3-git-send-email-tamizhr@codeaurora.org
[rebase completely on top of my previous API changes]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Make some changes to the TID-config API:
 * use u16 in nl80211 (only, and restrict to using 8 bits for now),
   to avoid issues in the future if we ever want to use higher TIDs.
 * reject empty TIDs mask (via netlink policy)
 * change feature advertising to not use extended feature flags but
   have own mechanism for this, which simplifies the code
 * fix all variable names from 'tid' to 'tids' since it's a mask
 * change to cfg80211_ name prefixes, not ieee80211_
 * fix some minor docs/spelling things.

Change-Id: Ia234d464b3f914cdeab82f540e018855be580dce
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the new NL80211_CMD_SET_TID_CONFIG command to support
data TID specific configuration. Per TID configuration is
passed in the nested NL80211_ATTR_TID_CONFIG attribute.

This patch adds support to configure per TID noack policy
through the NL80211_TID_CONFIG_ATTR_NOACK attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We use that here, and do seem to get it through some recursive
include, but better include it explicitly.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200224093814.1b9c258fec67.I45ac150d4e11c72eb263abec9f1f0c7add9bef2b@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using
a new set of keys (BIGTK; key index 6..7) similarly to the way
group-addressed Robust Management frames are protected (IGTK; key index
4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be
configured. Add an extended feature flag to indicate driver support for
the new key index values to avoid array overflows in driver
implementations and also to indicate to user space when this
functionality is available.
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

These were helpful while working with extensions to NL80211_CMD_NEW_KEY,
so add more explicit error reporting for additional cases that can fail
while that command is being processed.
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-1-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This reverts commit 8c3ed7aa.

As Jouni points out, there's really no need for this, since the
RSN pre-authentication frames are normal data frames, not port
control frames (locally).

We can still revert this now since it hasn't actually gone beyond
-next.

Fixes: 8c3ed7aa ("nl80211: add src and dst addr attributes for control port tx/rx")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If nl80211_parse_he_obss_pd() fails, we leak the previously
allocated ACL memory. Free it in this case.

Fixes: 796e90f4 ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200221104142.835aba4cdd14.I1923b55ba9989c57e13978f91f40bfdc45e60cbd@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Trivial cleanup, so that all bridge port-specific code can be found in
one go.

CC: Johannes Berg <johannes@sipsolutions.net>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

When using control port over nl80211 in AP mode with
pre-authentication, APs need to forward frames to other
APs defined by their MAC address. Before this patch,
pre-auth frames reaching user space over nl80211 control
port  have no longer any information about the dest attached,
which can be used for forwarding to a controller or injecting
the frame back to a ethernet interface over a AF_PACKET
socket.
Analog problems exist, when forwarding pre-auth frames from
AP -> STA.

This patch therefore adds the NL80211_ATTR_DST_MAC and
NL80211_ATTR_SRC_MAC attributes to provide more context
information when forwarding.
The respective arguments are optional on tx and included on rx.
Therefore unaware existing software is not affected.

Software which wants to detect this feature, can do so
by checking against:
  NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de
[split into separate cfg80211/mac80211 patches]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

To support Pre Association Security Negotiation (PASN) while already
associated to one AP, allow user space to register to Rx
authentication frames, so that the user space logic would be able to
receive/handle authentication frames from a different AP as part of
PASN.

Note that it is expected that user space would intelligently register
for Rx authentication frames, i.e., only when PASN is used and
configure a match filter only for PASN authentication algorithm, as
otherwise the MLME functionality of mac80211 would be broken.

Additionally, since some versions of the user space daemons wrongly
register to all types of authentication frames (which might result in
unexpected behavior) allow such registration if the request is for a
specific authentication algorithm number.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131114529.894206-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Commit ab4dfa20 ("cfg80211: Allow drivers to advertise supported AKM
suites") introduces the support to advertize supported AKMs to userspace.

This needs an enhancement to advertize the AKM support per interface type,
specifically for the cfg80211-based drivers that implement SME and use
different mechanisms to support the AKM's for each interface type (e.g.,
the support for SAE, OWE AKM's take different paths for such drivers on
STA/AP mode).

This commit aims the same and enhances the earlier mechanism of advertizing
the AKMs per wiphy. Add new nl80211 attributes and data structure to
provide supported AKMs per interface type to userspace.

the AKMs advertized in akm_suites are default capabilities if not
advertized for a specific interface type in iftype_akm_suites.
Signed-off-by: NVeerendranath Jakkam <vjakkam@codeaurora.org>
Link: https://lore.kernel.org/r/20200126203032.21934-1-vjakkam@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The regulatory domain might forbid HE operation.  Certain regulatory
domains may restrict it for specific channels whereas others may do it
for the whole regulatory domain.

Add an option to indicate it in the channel flag.
Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds the attributes, policy and parsing code to allow userland
to send the info about the BSS coloring settings to the kernel.
Signed-off-by: NJohn Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20191217141921.8114-1-john@phrozen.org
[johannes: remove the strict policy parsing, that was a misunderstanding]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The per-tid statistics need to be released after the call to rdev_get_station

Cc: stable@vger.kernel.org
Fixes: 8689c051 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200108170630.33680-2-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The per-tid statistics need to be released after the call to rdev_get_station

Cc: stable@vger.kernel.org
Fixes: 5ab92e7f ("cfg80211: add support to probe unexercised mesh link")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200108170630.33680-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Function nl80211_validate_nested() is not specific to nl80211, it's
a counterpart to nla_validate_nested_deprecated() with strict validation.
For consistency with other validation and parse functions, rename it to
nla_validate_nested().
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This provides an alternative mechanism for AP VLAN support where a
single netdev is used with VLAN tagged frames instead of separate
netdevs for each VLAN without tagged frames from the WLAN driver.

By setting NL80211_EXT_FEATURE_VLAN_OFFLOAD flag the driver indicates
support for a single netdev with VLAN tagged frames. Separate
VLAN-specific netdevs can be added using RTM_NEWLINK/IFLA_VLAN_ID
similarly to Ethernet. NL80211_CMD_NEW_KEY (for group keys),
NL80211_CMD_NEW_STATION, and NL80211_CMD_SET_STATION will optionally
specify vlan_id using NL80211_ATTR_VLAN_ID.
Signed-off-by: NGurumoorthi Gnanasambandhan <gguru@codeaurora.org>
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20191031214640.5012-1-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Mesh path nexthop should be a ethernet address, but current validation
checks against 4 byte integers.

Cc: stable@vger.kernel.org
Fixes: 2ec600d6 ("nl80211/cfg80211: support for mesh, sta dumping")
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

cfg80211_assign_cookie already checks & prevents a 0 from being
returned, so the explicit loop is unnecessary.
Signed-off-by: NDenis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20191008164350.2836-1-denkenz@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In nl80211_get_ftm_responder_stats, a new skb is created via nlmsg_new
named msg. If nl80211hdr_put() fails, then msg should be released. The
return statement should be replace by goto to error handling code.

Fixes: 81e54d08 ("cfg80211: support FTM responder configuration/statistics")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191004194220.19412-1-navid.emamdoost@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>