Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include/linux/security.h: In function ‘security_release_secctx’:
include/linux/security.h:2757: warning: ‘return’ with a value, in function returning void
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the lock_cpu_hotplug()/unlock_cpu_hotplug() calls from
net_dma_rebalance

The lock_cpu_hotplug()/unlock_cpu_hotplug() sequence in
net_dma_rebalance is both incorrect (as pointed out by David Miller)
because lock_cpu_hotplug() may sleep while the net_dma_event_lock
spinlock is held, and unnecessary (as pointed out by Andrew Morton) as
spin_lock() disables preemption which protects from CPU hotplug
events.
Signed-off-by: NChris Leech <christopher.leech@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a bug in the DECnet routing code where we were
selecting a loopback device in preference to an outward facing device
even when the destination was known non-local. This patch should fix
the problem.
Signed-off-by: NPatrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: NSteven Whitehouse <steve@chygwyn.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Catherine Zhang <cxzhang@watson.ibm.com>

This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch.  Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.

This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx.  The former retrieves the security
context and the latter releases it.  A hook is required for releasing
the security context because it is up to the security module to decide
how that's done.  In the case of Selinux, it's a simple kfree
operation.
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skb_queue_head_init() function is used both in drivers for private use
and in the core networking code.  The usage models are vastly set of
functions that is only softirq safe; while the driver usage tends to be
more limited to a few hardirq safe accessor functions.  Rather than
annotating all 133+ driver usages, for now just split this lock into a per
queue class.  This change is obviously safe and probably should make
2.6.18.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  When I tested linux kernel 2.6.71.7 about statistics
"ipv6IfStatsOutFragCreates", and found that it couldn't increase
correctly. The criteria is RFC 2465:

  ipv6IfStatsOutFragCreates OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The number of output datagram fragments that have
         been generated as a result of fragmentation at
         this output interface."
      ::= { ipv6IfStatsEntry 15 }

I think there are two issues in Linux kernel. 
1st:
RFC2465 specifies the counter is "The number of output datagram
fragments...". I think increasing this counter after output a fragment
successfully is better. And it should not be increased even though a
fragment is created but failed to output.

2nd:
If we send a big ICMP/ICMPv6 echo request to a host, and receive
ICMP/ICMPv6 echo reply consisted of some fragments. As we know that in
Linux kernel first fragmentation occurs in ICMP layer(maybe saying
transport layer is better), but this is not the "real"
fragmentation,just do some "pre-fragment" -- allocate space for date,
and form a frag_list, etc. The "real" fragmentation happens in IP layer
-- set offset and MF flag and so on. So I think in "fast path" for
ip_fragment/ip6_fragment, if we send a fragment which "pre-fragment" by
upper layer we should also increase "ipv6IfStatsOutFragCreates".
Signed-off-by: NWei Dong <weid@nanjing-fnst.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  When I tested Linux kernel 2.6.17.7 about statistics
"ipv6IfStatsInHdrErrors", found that this counter couldn't increase
correctly. The criteria is RFC2465:
  ipv6IfStatsInHdrErrors OBJECT-TYPE
      SYNTAX     Counter3
      MAX-ACCESS read-only
      STATUS     current
      DESCRIPTION
         "The number of input datagrams discarded due to
         errors in their IPv6 headers, including version
         number mismatch, other format errors, hop count
         exceeded, errors discovered in processing their
         IPv6 options, etc."
      ::= { ipv6IfStatsEntry 2 }

When I send TTL=0 and TTL=1 a packet to a router which need to be
forwarded, router just sends an ICMPv6 message to tell the sender that
TIME_EXCEED and HOPLIMITS, but no increments for this counter(in the
function ip6_forward).
Signed-off-by: NWei Dong <weid@nanjing-fnst.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a more complete solution in the works, involving
the seperation of CHECKSUM_HW on input vs. output, and
having netfilter properly do incremental checksums.

But that is a very involved patch and is thus 2.6.19
material.

What we have now is infinitely better than the past,
wherein all TSO packets were dropped due to corrupt
checksums as soon at the NAT module was loaded.  At
least now, the checksums do get fixed up, it just
isn't the cleanest nor most optimal solution.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hashlimit table name and the textsearch algorithm need to be
terminated, the textsearch pattern length must not exceed the
maximum size.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we don't know in which direction the first packet will arrive, we
need to create one expectation for each direction, which is currently
prevented by max_expected beeing set to 1.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a dev_alloc_skb variant that takes a struct net_device * paramater.
For now that paramater is unused, but I'll use it to allocate the skb
from node-local memory in a follow-up patch.  Also there have been some
other plans mentioned on the list that can use it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon guidance from Alexey Kuznetsov.

When linger2 is active, we check to see if the fin_wait2
timeout is longer than the timewait.  If it is, we schedule
the keepalive timer for the difference between the timewait
timeout and the fin_wait2 timeout.

When this orphan socket is seen by tcp_keepalive_timer()
it will try to transform this fin_wait2 socket into a
fin_wait2 mini-socket, again if linger2 is active.

Not all paths were setting this initial keepalive timer correctly.
The tcp input path was doing it correctly, but tcp_close() wasn't,
potentially making the socket linger longer than it really needs to.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch below fixes a problem in the iptables SECMARK target, where
the user-supplied 'selctx' string may not be nul-terminated.

From initial analysis, it seems that the strlen() called from
selinux_string_to_sid() could run until it arbitrarily finds a zero,
and possibly cause a kernel oops before then.

The impact of this appears limited because the operation requires
CAP_NET_ADMIN, which is essentially always root.  Also, the module is
not yet in wide use.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Generate netevents for:
- neighbour changes
- routing redirects
- pmtu changes
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch uses notifier blocks to implement a network event
notifier mechanism.

Clients register their callback function by calling
register_netevent_notifier() like this:

static struct notifier_block nb = {
        .notifier_call = my_callback_func
};

...

register_netevent_notifier(&nb);
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refer to RFC2012, tcpAttemptFails is defined as following:
  tcpAttemptFails OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "The number of times TCP connections have made a direct
              transition to the CLOSED state from either the SYN-SENT
              state or the SYN-RCVD state, plus the number of times TCP
              connections have made a direct transition to the LISTEN
              state from the SYN-RCVD state."
      ::= { tcp 7 }

When I lookup into RFC793, I found that the state change should occured
under following condition:
  1. SYN-SENT -> CLOSED
     a) Received ACK,RST segment when SYN-SENT state.

  2. SYN-RCVD -> CLOSED
     b) Received SYN segment when SYN-RCVD state(came from LISTEN).
     c) Received RST segment when SYN-RCVD state(came from SYN-SENT).
     d) Received SYN segment when SYN-RCVD state(came from SYN-SENT).

  3. SYN-RCVD -> LISTEN
     e) Received RST segment when SYN-RCVD state(came from LISTEN).

In my test, those direct state transition can not be counted to
tcpAttemptFails.
Signed-off-by: NWei Yongjun <yjwei@nanjing-fnst.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a patch by Jesper Juhl.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Hemminger <shemminger@osdl.org>
Acked-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we allow building appletalk drivers in-kernel when
CONFIG_ATALK is modular.  That doesn't work because these drivers use
symbols such as "alloc_talkdev" which is exported from code built
by CONFIG_ATALK.

Noticed by Toralf Förster.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the trim point is within the head and there is no paged data,
___pskb_trim fails to drop the first element in the frag_list.
This patch fixes this by moving the len <= offset case out of the
page data loop.

This patch also adds a missing kfree_skb on the frag that we just
cloned.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Header doesn't use anything from atomic.h.
It fixes headers_check warning:

include/linux/netfilter_bridge.h requires asm/atomic.h, which does not exist

Compile tested on
alpha     arm   i386-up  sparc    sparc64-up  x86_64
alpha-up  i386           sparc64  sparc-up    x86_64-up
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current users of ip6_dst_lookup can be divided into two classes:

1) The caller holds no locks and is in user-context (UDP).
2) The caller does not want to lookup the dst cache at all.

The second class covers everyone except UDP because most people do
the cache lookup directly before calling ip6_dst_lookup.  This patch
adds ip6_sk_dst_lookup for the first class.

Similarly ip6_dst_store users can be divded into those that need to
take the socket dst lock and those that don't.  This patch adds
__ip6_dst_store for those (everyone except UDP/datagram) that don't
need an extra lock.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on MIPL2 kernel patch.
Signed-off-by: NNoriaki YAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Based on MIPL2 kernel patch.
Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

We also do not try regenarating new temporary address corresponding to an
address with infinite preferred lifetime.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Based on MIPL2 kernel patch.
Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits)
  V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works better
  V4L/DVB (4379): Videodev: Check return value of class_device_register() correctly
  V4L/DVB (4373): Correctly handle sysfs error leg file removal in pvrusb2
  V4L/DVB (4368): Bttv: use class_device_create_file and handle errors
  V4L/DVB (4367): Videodev: Handle class_device related errors
  V4L/DVB (4365): OVERLAY flag were enabled by mistake
  V4L/DVB (4344): Fix broken dependencies on media Kconfig 
  V4L/DVB (4343): Fix for compilation without V4L1 or V4L1_COMPAT
  V4L/DVB (4342): Fix ext_controls align on 64 bit architectures
  V4L/DVB (4341): VIDIOCSMICROCODE were missing on compat_ioctl32
  V4L/DVB (4322): Fix dvb-pll autoprobing
  V4L/DVB (4311): Fix possible dvb-pll oops
  V4L/DVB (4337): Refine dead code elimination in pvrusb2
  V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA start/stop code
  V4L/DVB (4316): Check __must_check warnings
  V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog mode
  V4L/DVB (4313): Bugfix for keycode calculation on NPG remotes
  V4L/DVB (4310): Saa7134: rename dmasound_{init, exit}
  V4L/DVB (4306): Support non interlaced capture by default for saa713x
  V4L/DVB (4298): Check all __must_check warnings in bttv.
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Minor comment fix for misc_64.S
  [POWERPC] Use H_CEDE on non-SMT
  [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs
  [POWERPC] PMAC_APM_EMU should depend on ADB_PMU
  [POWERPC] Fix new interrupt code (MPIC detection)
  [POWERPC] Fix new interrupt code (MPIC endianness)
  [POWERPC] Add cpufreq support for Xserve G5
  [POWERPC] Xserve G5 thermal control fixes
  [POWERPC] Fix mem= handling when the memory limit is > RMO size
  [POWERPC] More offb/bootx fixes
  [POWERPC] Fix legacy_serial.c error handling on 32 bits
  [POWERPC] Fix default clock for udbg_16550
  [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set
  [POWERPC] Fix 32 bits warning in prom_init.c
  [POWERPC] Workaround Pegasos incorrect ISA "ranges"
  [POWERPC] fix up front-LED Kconfig

Since we now use the generic backlight infrastructure, I think we need to
call rivafb_bl_init before calling register_framebuffer since otherwise
rivafb_bl_init might race with the framebuffer layer already opening the
device and setting up the video mode.  In this case we might end up with a
not yet fully intialized backlight (info->bl_dev still NULL) when calling
riva_bl_set_power via rivafb_set_par/rivafb_load_video_mode and the kernel
dies without any further notice during boot.

This fixes booting current git on a PB 6,1.  In this case radeonfb/atyfb
would be affected too - I can fix that too but don't have any hardware to
test this on.

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_FB_NVIDIA already depends on CONFIG_PCI in drivers/video/Kconfig.
Driver does an extra ``sanity check'' which is then redundant.
Signed-off-by: NArthur Othieno <apgo@patchbomb.org>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes several problems:
- The legacy backlight value might be set at interrupt time. Introduced
  a worker to prevent it from directly calling the backlight code.
- via-pmu allows the backlight to be grabbed, in which case we need to
  prevent other kernel code from changing the brightness.
- Don't send PMU requests in via-pmu-backlight when the machine is about
  to sleep or waking up.
- More Kconfig fixes.
Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw
too much power when suspended to RAM, reducing drastically the battery
lifetime.  The solution is to enable suspend-to-D2 on these machines.  They
are whitelisted through their subsystem vendor/device ID.  This fixes
http://bugzilla.kernel.org/show_bug.cgi?id=3022

The patch introduces a framework to alter the pm_mode and reinit_func fields
of the radeonfb_info structure based on a whitelist.  This should facilitate
future hardware-dependent workarounds.  The workaround for the Samsung P35
that is already in the radeonfb code has been rewritten using this framework.

The behavior can be overridden with module options:

i)  video=radeonfb:force_sleep=1
    enable suspend-to-D2 also on non-whitelisted machines (useful for
    testing new notebook models),

ii) video=radeonfb:ignore_devlist=1
    Disable checking the whitelist and do not apply any workarounds.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The backlight and lcd subsystems can be notified by the framebuffer layer
of blanking events.  However, these subsystems, as a whole, can function
independently from the framebuffer layer.  But in order to enable to the
lcd and backlight subsystems, the framebuffer has to be compiled also,
effectively sucking in a huge amount of unneeded code.

To prevent dependency problems, separate out the framebuffer notification
mechanism from the framebuffer layer and permanently link it to the kernel.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on a bug report from Russ Ross <russruss@gmail.com>

According to the spec:

"The remove request asks the file server both to remove the file
 represented by fid and to clunk the fid, even if the remove fails."

but the Linux client seems to expect the fid to be valid after a failed
remove attempt.  Specifically, I'm getting this behavior when attempting to
remove a non-empty directory.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>