- 09 7月, 2018 11 次提交
-
-
由 Ofer Heifetz 提交于
This patch adds the MD5 algorithm support to the Inside Secure SafeXcel cryptographic engine driver. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The ORO bridge (connected to the EIP197 write channel) does not generate back pressure towards the EIP197 when its internal FIFO is full. It assumes that the EIP will not drive more write transactions than the maximal supported outstanding (32). Hence tx_max_cmd_queue must be configured to 5 (or less). Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds extra steps in the module removal path, to reset the command and result rings. The corresponding interrupts are cleared, and the ring address configuration is reset. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: small reworks, commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch updates the TRC configuration so that the version of the EIP197 engine being used is taken into account, as the configuration differs between the EIP197B and the EIP197D. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds support for the eip197d engine to the Inside Secure SafeXcel cryptographic driver. This new engine is similar to the eip197b and reuse most of its code. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
So far a single processing engine (PE) was configured and used in the Inside Secure SafeXcel cryptographic engine driver. Some versions have more than a single PE. This patch rework the driver's initialization to take this into account and to allow configuring more than one PE. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: some reworks and commit message.] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The Inside Secure SafeXcel driver currently uses 4 rings, but the eip197d engines has 8 of them. This patch updates the driver so that rings are allocated dynamically based on the number of available rings supported by a given engine. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Add a flags field in the private structure, and a first flag for engines needing context invalidation (currently only the eip197b). The invalidation is needed when the engine includes a TRC cache, which will also be true for the upcoming addition of the eip197d engine. Suggested-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
EIP engines do not support the same set of algorithms. So far the supported engines in the Inside Secure SafeXcel driver support the same set of algorithms, but that won't be true for all engines. This patch adds an 'engines' field in the algorithm definitions so that they only are registered when using a compatible cryptographic engine. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
At first we used two compatibles in the SafeXcel driver, named after the engine revision: eip97 and eip197. However this family of engines has more precise versions and in fact we're supporting the eip97ies and eip197b. More versions will be supported in the future, such as the eip197d, and we'll need to differentiate them. This patch fixes the compatibles used in the driver, to now use precise ones. The two historical compatibles are kept for backward compatibility. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch moves the firmware loaded by the Inside Secure SafeXcel driver from /lib/firmware/ to /lib/firmware/inside-secure/eip197b/. This prepares the driver for future patches which will support other revisions of the EIP197 crypto engine as they'll have their own firmwares. To keep the compatibility of what was done, the old path is still supported as a fallback for the EIP197b (currently the only one supported by the driver that loads a firmware). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 22 6月, 2018 9 次提交
-
-
由 Antoine Tenart 提交于
This patch adds the authenc(hmac(sha384),cbc(aes)) algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the hmac(sha384) algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the sha384 algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the authenc(hmac(sha512),cbc(aes)) algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the hmac(sha512) algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the sha512 algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
A counter is given to the engine when finishing hash computation. It currently uses the blocksize while it counts the number of 64 bytes blocks given to the engine. This works well for all algorithms so far, as SHA1, SHA224 and SHA256 all have a blocksize of 64 bytes, but others algorithms such as SHA512 wouldn't work. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch reworks the way invalidation request handlers handle the result descriptor errors, to use the common error handling function. This improves the drivers in terms of readability and maintainability. Suggested-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The token size was increased for AEAD support. Occasional authentication fails arise since the result descriptor overflows. This is because the token size and the engine minimal thresholds must be in sync. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 27 5月, 2018 10 次提交
-
-
由 Antoine Tenart 提交于
This patch adds the authenc(hmac(sha1),cbc(aes)) AEAD algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the authenc(hmac(sha224),cbc(aes)) AEAD algorithm support to the Inside Secure SafeXcel driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds support for the first AEAD algorithm in the Inside Secure SafeXcel driver, authenc(hmac(sha256),cbc(aes)). As this is the first AEAD algorithm added to this driver, common AEAD functions are added as well. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch improves the error reporting from the Inside Secure driver to the upper layers and crypto consumers. All errors reported by the engine aren't fatal, and some may be genuine. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This commit fixes the CONTEXT_CONTROL_TYPE_HASH_ENCRYPT_OUT and CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT types by assigning the right value, and by renaming CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT to CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN. This is not submitted as a fix for older kernel versions as these two defines weren't used back then. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patches makes the key and context size computation dynamic when using memzero_explicit() on these two arrays. This is safer, cleaner and will help future modifications of the driver when these two parameters sizes will changes (the context size will be bigger when using AEAD algorithms). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch makes the context control size computation dynamic, not to rely on hardcoded values. This is better for the future, and will help adding the AEAD support. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patches reworks the way the algorithm type is set in the context, by using the fact that the decryption algorithms are just a combination of the algorithm encryption type and CONTEXT_CONTROL_TYPE_NULL_IN. This will help having simpler code when adding the AEAD support, to avoid ending up with an endless switch case block. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch reworks the Inside Secure cipher functions, to remove all skcipher specific information and structure from all functions generic enough to be shared between skcipher and aead algorithms. This is a cosmetic only patch. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch removes the use of VLAs to allocate requests on the stack, by removing both SKCIPHER_REQUEST_ON_STACK and AHASH_REQUEST_ON_STACK. As we still need to allocate requests on the stack to ease the creation of invalidation requests a new, non-VLA, definition is used: EIP197_REQUEST_ON_STACK. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 26 5月, 2018 1 次提交
-
-
由 Antoine Tenart 提交于
This patch fixes the Inside Secure driver which uses a memtset() call to set an MMIO area from the cryptographic engine to 0. This is wrong as memset() isn't guaranteed to work on MMIO for many reasons. This led to kernel paging request panics in certain cases. Use memset_io() instead. Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Reported-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 31 3月, 2018 8 次提交
-
-
由 Antoine Tenart 提交于
This patch adds the hmac(sha224) support to the Inside Secure cryptographic engine driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds the hmac(sha256) support to the Inside Secure cryptographic engine driver. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patches uses the state size of the algorithms instead of their digest size to copy the ipad and opad in the context. This doesn't fix anything as the state and digest size are the same for many algorithms, and for all the hmac currently supported by this driver. However hmac(sha224) use the sha224 hash function which has a different digest and state size. This commit prepares the addition of such algorithms. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
The token used for encryption and decryption of skcipher algorithms sets its stat field to "last packet". As it's a cipher only algorithm, there is not hash operation and thus the "last hash" bit should be set to tell the internal engine no hash operation should be performed. This does not fix a bug, but improves the token definition to follow exactly what's advised by the datasheet. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patches update the way the digest is copied from the state buffer to the result buffer, so that the copy only happen after the state buffer was DMA unmapped, as otherwise the buffer would be owned by the device. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch improves the send error path as it wasn't handling all error cases. A new label is added, and some of the goto are updated to point to the right labels, so that the code is more robust to errors. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch fixes a typo in the EIP197_HIA_xDR_WR_CTRL_BUG register name, as it should be EIP197_HIA_xDR_WR_CTRL_BUF. This is a cosmetic only change. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Small cosmetic patch fixing one typo in the EIP197_HIA_DSE_CFG_ALLWAYS_BUFFERABLE macro, it should be _ALWAYS_. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-