Some hosts (and boards that use mmc_spi) do not use interrupts on the CD
line, so they can't trigger mmc_detect_change. We want to poll the card
and see if there was a change. 1 second poll interval seems resonable.

This patch also implements .get_cd() host operation, that could be used
by the hosts that are able to report card-detect status without need to
talk MMC.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch removes a CVS tag that wasn't updated for a long time.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

JMicron chips sometimes have two interfaces to work around limitations
in Microsoft's sdhci driver. This patch allows us to use either interface.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

css_device_id exists, so use it for determining the right driver
(and add a match_flags which is always 1 for valid types).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Add modalias and subchannel type attributes for all subchannels.
I/O subchannel specific attributes are now created in
io_subchannel_probe(). modalias and subchannel type are also
added to the uevent for the css bus. Also make the css modalias
known.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

The register security hook is no longer required, as the capability
module is always registered.  LSMs wishing to stack capability as
a secondary module should do so explicitly.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

The sb_get_mnt_opts() hook is unused, and is superseded by the
sb_show_options() hook.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NJames Morris <jmorris@namei.org>

This patch causes SELinux mount options to show up in /proc/mounts.  As
with other code in the area seq_put errors are ignored.  Other LSM's
will not have their mount options displayed until they fill in their own
security_sb_show_options() function.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NJames Morris <jmorris@namei.org>

Enable security modules to distinguish reading of process state via
proc from full ptrace access by renaming ptrace_may_attach to
ptrace_may_access and adding a mode argument indicating whether only
read access or full attach access is requested.  This allows security
modules to permit access to reading process state without granting
full ptrace access.  The base DAC/capability checking remains unchanged.

Read access to /proc/pid/mem continues to apply a full ptrace attach
check since check_mem_permission() already requires the current task
to already be ptracing the target.  The other ptrace checks within
proc for elements like environ, maps, and fds are changed to pass the
read mode instead of attach.

In the SELinux case, we model such reading of process state as a
reading of a proc file labeled with the target process' label.  This
enables SELinux policy to permit such reading of process state without
permitting control or manipulation of the target process, as there are
a number of cases where programs probe for such information via proc
but do not need to be able to control the target (e.g. procps,
lsof, PolicyKit, ConsoleKit).  At present we have to choose between
allowing full ptrace in policy (more permissive than required/desired)
or breaking functionality (or in some cases just silencing the denials
via dontaudit rules but this can hide genuine attacks).

This version of the patch incorporates comments from Casey Schaufler
(change/replace existing ptrace_may_attach interface, pass access
mode), and Chris Wright (provide greater consistency in the checking).

Note that like their predecessors __ptrace_may_attach and
ptrace_may_attach, the __ptrace_may_access and ptrace_may_access
interfaces use different return value conventions from each other (0
or -errno vs. 1 or 0).  I retained this difference to avoid any
changes to the caller logic but made the difference clearer by
changing the latter interface to return a bool rather than an int and
by adding a comment about it to ptrace.h for any future callers.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Working with ftrace I would get large jumps of 11 millisecs or more with
the clock tracer. This killed the latencing timings of ftrace and also
caused the irqoff self tests to fail.

What was happening is with NO_HZ the idle would stop the jiffy counter and
before the jiffy counter was updated the sched_clock would have a bad
delta jiffies to compare with the gtod with the maximum.

The jiffies would stop and the last sched_tick would record the last gtod.
On wakeup, the sched clock update would compare the gtod + delta jiffies
(which would be zero) and compare it to the TSC. The TSC would have
correctly (with a stable TSC) moved forward several jiffies. But because the
jiffies has not been updated yet the clock would be prevented from moving
forward because it would appear that the TSC jumped too far ahead.

The clock would then virtually stop, until the jiffies are updated. Then
the next sched clock update would see that the clock was very much behind
since the delta jiffies is now correct. This would then jump the clock
forward by several jiffies.

This caused ftrace to report several milliseconds of interrupts off
latency at every resume from NO_HZ idle.

This patch adds hooks into the nohz code to disable the checking of the
maximum clock update when nohz is in effect. It resumes the max check
when nohz has updated the jiffies again.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It has been suggested that I add a way to disable the function tracer
on an oops. This code adds a ftrace_kill_atomic. It is not meant to be
used in normal situations. It will disable the ftrace tracer, but will
not perform the nice shutdown that requires scheduling.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a XFRM_STATE_AF_UNSPEC flag to handle the AF_UNSPEC behavior for
the selector family. Userspace applications can set this flag to leave
the selector family of the xfrm_state unspecified.  This can be used
to to handle inter family tunnels if the selector is not set from
userspace.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provide a helper to load the file and validate it in one call, to
simplify error handling in the drivers which are going to use it.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Some devices need their firmware as a set of {address, len, data...}
records in some specific order rather than a simple blob.

The normal way of doing this kind of thing is 'ihex', which is a text
format and not entirely suitable for use in the kernel.

This provides a binary representation which is very similar, but much
more compact -- and a helper routine to skip to the next record,
because the alignment constraints mean that everybody will screw it up
for themselves otherwise.

Also a helper function which can verify that a 'struct firmware'
contains a valid set of ihex records, and that following them won't run
off the end of the loaded data.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Some drivers have their own hacks to bypass the kernel's firmware loader
and build their firmware into the kernel; this renders those unnecessary.

Other drivers don't use the firmware loader at all, because they always
want the firmware to be available. This allows them to start using the
firmware loader.

A third set of drivers already use the firmware loader, but can't be
used without help from userspace, which sometimes requires an initrd.
This allows them to work in a static kernel.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

In preparation for supporting firmware files linked into the static
kernel, make fw->data const to ensure that users aren't modifying it (so
that we can pass a pointer to the original in-kernel copy, rather than
having to copy it).
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

All new crypto interfaces should go into individual files as much
as possible in order to ensure that crypto.h does not collapse under
its own weight.

This patch moves the ahash code into crypto/hash.h and crypto/internal/hash.h
respectively.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The base field in ahash_tfm appears to have been cut-n-pasted from
ablkcipher.  It isn't needed here at all.  Similarly, the info field
in ahash_request also appears to have originated from its cipher
counter-part and is vestigial.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds asynchronous hash and digest support.
Signed-off-by: NLoc Ho <lho@amcc.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add __ide_default_irq() inline helper and use it instead of
ide_default_irq() in ide-probe.c and ns87415.c (all host drivers
except IDE PCI ones always setup hwif->irq so it is enough to
check only for I/O bases 0x1f0 and 0x170).

This fixes post-2.6.25 regression since ide_default_irq()
define could shadow ide_default_irq() inline.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch adds /sys/firmware/memmap interface that represents the BIOS
(or Firmware) provided memory map. The tree looks like:

    /sys/firmware/memmap/0/start   (hex number)
                           end     (hex number)
                           type    (string)
    ...                 /1/start
                           end
                           type

With the following shell snippet one can print the memory map in the same form
the kernel prints itself when booting on x86 (the E820 map).

  --------- 8< --------------------------
    #!/bin/sh
    cd /sys/firmware/memmap
    for dir in * ; do
        start=$(cat $dir/start)
        end=$(cat $dir/end)
        type=$(cat $dir/type)
        printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
    done
  --------- >8 --------------------------

That patch only provides the needed interface:

 1. The sysfs interface.
 2. The structure and enumeration definition.
 3. The function firmware_map_add() and firmware_map_add_early()
    that should be called from architecture code (E820/EFI, for
    example) to add the contents to the interface.

If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does
nothing without cluttering the architecture-specific code with #ifdef's.

The purpose of the new interface is kexec: While /proc/iomem represents
the *used* memory map (e.g. modified via kernel parameters like 'memmap'
and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory
map provided via the firmware. So kexec can:

 - use the original memory map for rebooting,
 - use the /proc/iomem for setting up the ELF core headers for kdump
   case that should only represent the memory of the system.

The patch has been tested on i386 and x86_64.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Acked-by: NGreg KH <gregkh@suse.de>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

want to remove arch_get_ram_range, and use early_node_map instead.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Making a variable page-aligned by using
__attribute__((section(".data.page_aligned"))) is fragile because if
sizeof(variable) is not also a multiple of page size, it leaves
variables in the remainder of the section unaligned.

This patch introduces two new qualifiers, __page_aligned_data and
__page_aligned_bss to set the section *and* the alignment of
variables.  This makes page-aligned variables more robust because the
linker will make sure they're aligned properly.  Unfortunately it
requires *all* page-aligned data to use these macros...
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * Remove the boot_cpu_pda array and pointer table from the data section.
    Allocate the pointer table and array during init.  do_boot_cpu()
    will reallocate the pda in node local memory and if the cpu is being
    brought up before the bootmem array is released (after_bootmem = 0),
    then it will free the initial pda.  This will happen for all cpus
    present at system startup.

    This removes 512k + 32k bytes from the data section.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

use early_node_map to init high pages, so we can remove page_is_ram() and
page_is_reserved_early() in the big loop with add_one_highpage

also remove page_is_reserved_early(), it is not needed anymore.

v2: fix the build of other platforms
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

in case we have kva before ramdisk on a node, we still need to use
those ranges.

v2: reserve_early kva ram area, in case there are holes in highmem, to avoid
    those area could be treat as free high pages.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

1. add reserve_bootmem_generic for 32bit
2. change len to unsigned long
3. make early_res_to_bootmem to use it
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

These two macros are useful beyond lock debugging. Moved definitions from
include/linux/debug_locks.h to include/linux/kernel.h, so code that needs
them does not have to include the former, which would have been a less
intuitive choice of a header.
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In linux-next there is a commit ("x86: Add performance variants of cpumask
operators") which, as part of the 4096 cpu support work adds some new APIs
for dealing with cpu masks.  Add trivial versions of these now so that
subsystems can update in a timely manner and avoid conflicts in linux-next
and the next merge window.

Cc: Mike Travis <travis@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This has been sitting around unloved for way too long..

The Marvell CaFe chip's SD implementation chokes during card insertion
if one attempts to set the voltage and power up in the same
SDHCI_POWER_CONTROL register write.  This adds a quirk that does
that particular dance in two steps.

It also adds an entry to pci_ids.h for the CaFe chip's SD device.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This commit includes a bugfix for the fragile setuid fixup code in the
case that filesystem capabilities are supported (in access()).  The effect
of this fix is gated on filesystem capability support because changing
securebits is only supported when filesystem capabilities support is
configured.)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In linux-next there is a commit ("rcu: split list.h and move rcu-protected
lists into rculist.h") that moved the rcu related list iterators from
list.h to rculist.h.  Add a trivial version of the file now so that
various subsystem trees can start using it now for -next changes and so
reduce the build errors caused by adding uses of the moved functions.

Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@kernel.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

> the build (.config attached) failed, make ends with :
> ...
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      vmlinux
> drivers/built-in.o: In function `sas_request_addr':
> (.text+0x33bab): undefined reference to `request_firmware'
> drivers/built-in.o: In function `sas_request_addr':
> (.text+0x33c3f): undefined reference to `release_firmware'
> make: *** [vmlinux] Error 1

There's a slight fault in the stub logic.  It fails for FW_LOADER=m and
the user =y.

This should fix it.

This patch fixes the following 2.6.26-rc regression:
  http://bugzilla.kernel.org/show_bug.cgi?id=10730Reviewed-by: NToralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove all clameter@sgi.com addresses from the kernel tree since they will
become invalid on June 27th.  Change my maintainer email address for the
slab allocators to cl@linux-foundation.org (which will be the new email
address for the future).
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds blk_queue_update_dma_pad to prevent LLDs from overwriting
the dma pad mask wrongly (we added blk_queue_update_dma_alignment due
to the same reason).

This also converts libata to use blk_queue_update_dma_pad instead of
blk_queue_dma_pad.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The 192 byte cache is not necessary if we have a basic alignment of 128
byte. If it would be used then the 192 would be aligned to the next 128 byte
boundary which would result in another 256 byte cache. Two 256 kmalloc caches
cause sysfs to complain about a duplicate entry.

MIPS needs 128 byte aligned kmalloc caches and spits out warnings on boot without
this patch.
Signed-off-by: NChristoph Lameter <cl@linux-foundation.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

This allows platform code to manipulate GPIOs and brightness level as
needed.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch mostly from Eric Miao, with minor edits by rmk to convert
Eric's driver to a generic PWM-based backlight driver.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>