Add GCM/GMAC support to cryptoapi.

GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher
with a block size of 16.  The typical example is AES-GCM.
Signed-off-by: NMikko Herranen <mh1@iki.fi>
Reviewed-by: NMika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add AEAD support to tcrypt, needed by GCM.
Signed-off-by: NMikko Herranen <mh1@iki.fi>
Reviewed-by: NMika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Analogously to camellia7 patch, move
"absorb kw2 to other subkeys" and "absorb kw4 to other subkeys"
code parts into camellia_setup_tail(). This further reduces
source and object code size at the cost of two brances
in key setup code.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move "key XOR is end of F-function" code part into
camellia_setup_tail(), it is sufficiently similar
between camellia_setup128 and camellia_setup256.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

unifies encrypt/decrypt routines for different key lengths.
This reduces module size by ~25%, with tiny (less than 1%)
speed impact.
Also collapses encrypt/decrypt into more readable
(visually shorter) form using macros.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unused macro params.
Use (u8)(expr) instead of (expr) & 0xff,
helps gcc to realize how to use simpler commands.
Move CAMELLIA_FLS macro closer to encrypt/decrypt routines.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces the custom inc/xor in CTR with the generic functions.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces the custom xor in CBC with the generic crypto_xor.

It changes the operations for in-place encryption slightly to avoid
calling crypto_xor with tmpbuf since it is not necessarily aligned.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

All common block ciphers have a block size that's a power of 2.  In fact,
all of our block ciphers obey this rule.

If we require this then CBC can be optimised to avoid an expensive divide
on in-place decryption.

I've also changed the saving of the first IV in the in-place decryption
case to the last IV because that lets us use walk->iv (which is already
aligned) for the xor operation where alignment is required.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces the custom xor in CBC with the generic crypto_xor.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

With the addition of more stream ciphers we need to curb the proliferation
of ad-hoc xor functions.  This patch creates a generic pair of functions,
crypto_inc and crypto_xor which does big-endian increment and exclusive or,
respectively.

For optimum performance, they both use u32 operations so alignment must be
as that of u32 even though the arguments are of type u8 *.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The current PLL initalization has a number of deficiencies:

- uses fixed multiplier of 8, which overclocks the chip when using a
  reference clock that operates at frequencies above 33MHz. According
  to a comment in the BSD source, this is true for the external clock
  on almost all every board.

- writes to a reserved bit

- doesn't follow the initialization procedure specified in chapter
  6.11.1 of the HIFN hardware users guide

- doesn't allow to use the PCI clock

This patch adds a module parameter to specify the reference clock
(pci or external) and its frequency and uses that to calculate the
optimum multiplier to reach the maximal speed. By default it uses
the external clock and assumes a speed of 66MHz, which effectively
halfs the frequency currently used.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Handle waiting for new random within the drivers themselves, this allows to
use better suited timeouts for the individual rngs.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch implements the Salsa20 stream cipher using the blkcipher interface.

The core cipher code comes from Daniel Bernstein's submission to eSTREAM:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/

The test vectors comes from:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/

It has been tested successfully with "modprobe tcrypt mode=34" on an
UML instance.
Signed-off-by: NTan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Up until now we have ablkcipher algorithms have been identified as
type BLKCIPHER with the ASYNC bit set.  This is suboptimal because
ablkcipher refers to two things.  On the one hand it refers to the
top-level ablkcipher interface with requests.  On the other hand it
refers to and algorithm type underneath.

As it is you cannot request a synchronous block cipher algorithm
with the ablkcipher interface on top.  This is a problem because
we want to be able to eventually phase out the blkcipher top-level
interface.

This patch fixes this by making ABLKCIPHER its own type, just as
we have distinct types for HASH and DIGEST.  The type it associated
with the algorithm implementation only.

Which top-level interface is used for synchronous block ciphers is
then determined by the mask that's used.  If it's a specific mask
then the old blkcipher interface is given, otherwise we go with the
new ablkcipher interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the list of transforms we support and clarifies that
the Block Ciphers interface in fact supports all ciphers including stream
ciphers.

It also removes the obsolete Configuration Notes section and adds the
linux-crypto mailing list as the primary bug reporting address.

Finally it documents the fact that setkey should only be called from
user context.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the crypto scatterwalk code to use the generic
scatterlist chaining rather the version specific to crypto.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

alpha:

drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_init':
drivers/crypto/hifn_795x.c:1231: error: implicit declaration of function 'sg_init_table'
drivers/crypto/hifn_795x.c:1243: error: implicit declaration of function 'sg_set_page'
drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_exit':
drivers/crypto/hifn_795x.c:1257: error: implicit declaration of function 'sg_page'
drivers/crypto/hifn_795x.c:1257: warning: passing argument 1 of '__free_pages' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_add':
drivers/crypto/hifn_795x.c:1278: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk':
drivers/crypto/hifn_795x.c:1336: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'hifn_setup_session':
drivers/crypto/hifn_795x.c:1465: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c:1469: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c:1472: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_get':
drivers/crypto/hifn_795x.c:1593: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
{standard input}: Assembler messages:
{standard input}:7: Warning: setting incorrect section attributes for .got
drivers/crypto/hifn_795x.c: In function 'hifn_process_ready':
drivers/crypto/hifn_795x.c:1653: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'hifn_probe':
drivers/crypto/hifn_795x.c:2438: error: 'DMA_32BIT_MASK' undeclared (first use in this function)
drivers/crypto/hifn_795x.c:2438: error: (Each undeclared identifier is reported only once
drivers/crypto/hifn_795x.c:2438: error: for each function it appears in.)
drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The HIFN driver is currently selectable on s390 but wont compile.
Since it looks like HIFN needs PCI make the Kconfig dependent on PCI,
which is not available on s390.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch forces HIFN driver to invoke crypto request callbacks from
tasklet (softirq context) instead of hardirq context, since network
stack expects it to be called from bottom halves.

It is done by simply scheduling callback invocation via dedicated
tasklet. Workqueue solution was dropped because of tooo slow
rescheduling performance (7 times slower than tasklet, for mode details
one can check this link:
http://tservice.net.ru/~s0mbre/blog/devel/other/2007_11_09.html).

Driver passed all AES and DES tests in tcryt.c module.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Resubmitting this patch which extends sha256_generic.c to support SHA-224 as
described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231
is then supported through the hmac interface.

Patch includes test vectors for SHA-224 and HMAC-SHA-224.

SHA-224 chould be chosen as a hash algorithm when 112 bits of security
strength is required.

Patch generated against the 2.6.24-rc1 kernel and tested against
2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC.
Signed-off-by: NJonathan Lynch <jonathan.lynch@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Geode AES crypto engine supports only 128 bit long key. This
patch adds fallback for other key sizes which are required by the
AES standard.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Acked-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The setkey() function can be shared with the generic algorithm.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

NO other block mode is M by default.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The setkey() function can be shared with the generic algorithm.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch exports four tables and the set_key() routine. This ressources
can be shared by other AES implementations (aes-x86_64 for instance).
The decryption key has been turned around (deckey[0] is the first piece
of the key instead of deckey[keylen+20]). The encrypt/decrypt functions
are looking now identical (except they are using different tables and
key).
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds countersize to CTR mode.
The template is now ctr(algo,noncesize,ivsize,countersize).

For example, ctr(aes,4,8,4) indicates the counterblock
will be composed of a salt/nonce that is 4 bytes, an iv
that is 8 bytes and the counter is 4 bytes.

When noncesize + ivsize < blocksize, CTR initializes the
last block - ivsize - noncesize portion of the block to
zero.  Otherwise the counter block is composed of the IV
(and nonce if necessary).

If noncesize + ivsize == blocksize, then this indicates that
user is passing in entire counterblock. Thus countersize
indicates the amount of bytes in counterblock to use as
the counter for incrementing. CTR will increment counter
portion by 1, and begin encryption with that value.

Note that CTR assumes the counter portion of the block that
will be incremented is stored in big endian.
Signed-off-by: NJoy Latten <latten@austin.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move huge unrolled pieces of code (3 screenfuls) at the end of
128/256 key setup routines into common camellia_setup_tail(),
convert it to loop there.
Loop is still unrolled six times, so performance hit is very small,
code size win is big.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Acked-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Optimize GETU32 to use 4-byte memcpy (modern gcc will convert
such memcpy to single move instruction on i386).
Original GETU32 did four byte fetches, and shifted/XORed those.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Acked-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Rename some macros to shorter names: CAMELLIA_RR8 -> ROR8,
making it easier to understand that it is just a right rotation,
nothing camellia-specific in it.
CAMELLIA_SUBKEY_L() -> SUBKEY_L() - just shorter.

Move be32 <-> cpu conversions out of en/decrypt128/256 and into
camellia_en/decrypt - no reason to have that code duplicated twice.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Acked-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move code blocks around so that related pieces are closer together:
e.g. CAMELLIA_ROUNDSM macro does not need to be separated
from the rest of the code by huge array of constants.

Remove unused macros (COPY4WORD, SWAP4WORD, XOR4WORD[2])

Drop SUBL(), SUBR() macros which only obscure things.
Same for CAMELLIA_SP1110() macro and KEY_TABLE_TYPE typedef.

Remove useless comments:
/* encryption */ -- well it's obvious enough already!
void camellia_encrypt128(...)

Combine swap with copying at the beginning/end of encrypt/decrypt.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Acked-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently twofish cipher key setup code
has unrolled loops - approximately 70-100
instructions are repeated 40 times.

As a result, twofish module is the biggest module
in crypto/*.

Unrolling produces x2.5 more code (+18k on i386), and speeds up key
setup by 7%:

	unrolled: twofish_setkey/sec: 41128
	    loop: twofish_setkey/sec: 38148
	CALC_K256: ~100 insns each
	CALC_K192: ~90 insns
	   CALC_K: ~70 insns

Attached patch removes this unrolling.

$ size */twofish_common.o
   text    data     bss     dec     hex filename
  37920       0       0   37920    9420 crypto.org/twofish_common.o
  13209       0       0   13209    3399 crypto/twofish_common.o

Run tested (modprobe tcrypt reports ok). Please apply.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves macros in geode-aes.c into geode-aes.h.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The code waits in a busy loop until the hardware finishes the encryption
or decryption process. This wants a cpu_relax() :)
The busy loop finishes either if the encryption is done or if the counter
is zero. If the latter is true than the hardware failed. Since this
should not happen, leave sith a BUG().
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It is enough if the IV is copied before and after the while loop.
With DM-Crypt is seems not be required to save the IV after encrytion
because a new one is used in the request (dunno about other users).
It is not save to load the IV within while loop and not save afterwards
because we mill end up with the wrong IV if the request goes consists
of more than one page.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This three defines are used in all AES related hardware.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

alias isn't required because the module provides PCI ids.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HIFN driver update to use DES weak key checks (exported in this patch).
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>