Add support for the BGR888_1X24 image format.

No existing media bus codes describe exactly the way data is transferred
on the CSI-2 bus. This is not a new issue, the CSI-2 YUV422 8-bit format
is described by MEDIA_BUS_FMT_UYVY8_1X16 which is an arbitrary
convention and not an exact match. Use the MEDIA_BUS_FMT_BGR888_1X24 to
follow the same convention, based on the order in which bits are
transmitted over the CSI-2 bus.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

Add RGB565_1X16 to the enumeration of supported image formats.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

Bits 13 and 12 of the ISP_CONFIGn register configure the PIXEL_MODE
which specifies the sampling size, in pixel component units, on the
CSI-2 output data interface when data are transferred to memory.

The register description in the chip manual specifies that DUAL mode
should be used for YUV422 data.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NXavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

The CSI bridge should operate in dual components mode when it is
connected to a pixel transmitter that transfers two components at a time
in YUV 422 formats (16 bits, Y + U/V).

Use the image format variants to determine if single or dual component mode
should be used.

Add a note to the TODO file to record that the list of supported formats
should be restricted to the SoC model the CSI bridge is integrated on
to avoid potential pipeline mis-configurations.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

Rename the imx7-mipi-csis.c driver to remove the reference to i.MX7.

The driver is for an IP core found on i.MX7 and i.MX8 SoC, so do not
specify a SoC version number in the driver name.

Remove the references to the i.MX7 SoC in the driver symbols and expand
the driver's header with more information about the IP core the driver
controls.

Also rename the associated bindings documentation.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

The imx7-mipi-csis driver is in a good state and can be destaged.

Move the imx7-mipi-csis.c driver to the newly created
drivers/media/platform/imx directory and plumb the related
options in Kconfig and in Makefile.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

Replace the driver-specific definitions of MIPI CSI-2 data types with
macros from mipi-csi2.h.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Replace the hardcoded MIPI CSI-2 data types with macros from
mipi-csi2.h.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Replace the hardcoded MIPI CSI-2 data types with macros from
mipi-csi2.h.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

There are many CSI-2-related drivers in the media subsystem that come
with their own macros to handle the CSI-2 data types (or just hardcode
the numerical values). Provide a shared header with definitions for
those data types that driver can use.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

VSP hardware could be used (e.g. by the bootloader) before driver load,
and some interrupts could be left in enabled and pending state. In this
case, setting up VSP interrupt handler without masking interrupts before
causes interrupt handler to be immediately called (and crash due to null
vsp->info dereference).

Fix that by explicitly masking all interrupts before setting the interrupt
handler. To do so, have to set the interrupt handler later, after hw
revision is already detected and number of interrupts to mask gets
known.

Based on patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com> included
in the Renesas BSP kernel.
Signed-off-by: NNikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Adds the requisite device id to support detection of the Apple FaceTime
HD webcam exposed over the T2 BCE VHCI interface.
Tested-by: NAun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: NPaul Pawlowski <paul@mrarm.io>
Signed-off-by: NAun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: NAditya Garg <gargaditya08@live.com>
Reviewed-by: NSergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Without this the default (SMPTE 170M) from init_cfg stays unchanged.
Even after configuring 'srgb' colorspace (or 'raw')
$ media-ctl -V "'csis-32e30000.mipi-csi':0 [colorspace:srgb]"
the colorspace does not change at all:
$ media-ctl --get-v4l2 "'csis-32e30000.mipi-csi':0"
  [fmt:SRGGB10_1X10/1920x1080 field:none colorspace:smpte170m xfer:709
   ycbcr:601 quantization:lim-range]
Signed-off-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to
ctx->active_fmt and there is a dereference of it after that, which could
lead to NULL pointer dereference on failure of devm_kzalloc().

Fix this bug by adding a NULL check of ctx->active_fmt.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings, and our static
analyzer no longer warns about this code.

Fixes: 71681550 ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

This error path needs to drop the mutex to avoid a deadlock.

Fixes: 7be91e02 ("media: i2c: Add ov08d10 camera sensor driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

MWB gain register are used to set gain for each mwb channel mannually.
However, it will involve some artifacts at low light environment as gain
cannot be applied to each channel synchronously. Update the driver to use
group write for digital gain to make the sure RGB digital gain be applied
together at frame boundary.
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

link-frequencies is required but only mentioned in the example. Add
it to the description.

Fixes: f3ce7200 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Signed-off-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

This fixes "make dt_binding_check":

    Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.yaml:
camera@20: port:endpoint: Unevaluated properties are not allowed
('link-frequencies', 'data-lanes' were unexpected)
    From schema: Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml

[Sakari Ailus: Reword commit message]

Fixes: f3ce7200 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMartin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields. Wrap the target region
in struct_group(). This additionally fixes a theoretical misalignment
of the copy (since the size of "buf" changes between 64-bit and 32-bit,
but this is likely never built for 64-bit).

FWIW, I think this code is totally broken on 64-bit (which appears to
not be a "real" build configuration): it would either always fail (with
an uninitialized data->buf_size) or would cause corruption in userspace
due to the copy_to_user() in the call path against an uninitialized
data->buf value:

omap3isp_stat_request_statistics_time32(...)
    struct omap3isp_stat_data data64;
    ...
    omap3isp_stat_request_statistics(stat, &data64);

int omap3isp_stat_request_statistics(struct ispstat *stat,
                                     struct omap3isp_stat_data *data)
    ...
    buf = isp_stat_buf_get(stat, data);

static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
                                               struct omap3isp_stat_data *data)
...
    if (buf->buf_size > data->buf_size) {
            ...
            return ERR_PTR(-EINVAL);
    }
    ...
    rval = copy_to_user(data->buf,
                        buf->virt_addr,
                        buf->buf_size);

Regardless, additionally initialize data64 to be zero-filled to avoid
undefined behavior.

Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor

Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 378e3f81 ("media: omap3isp: support 64-bit version of omap3isp_stat_data")
Cc: stable@vger.kernel.org
Reviewed-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

MIPI CSI-2 continuous and non-continuous clock modes are mutually
exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only
V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never
read. Drop those flags. Virtual channel information should be conveyed
through frame descriptors instead.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The V4L2_MBUS_CSI2_*_LANE flags are a legacy API and are unused. Drop
them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The media bus configuration is specified through a set of flags, some of
which being mutually exclusive. This doesn't scale to express more
complex configurations. Improve the API by replacing the single flags
field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures.
The flags themselves are still used in those structures, so they are
kept here. Drivers are however updated to use structure fields instead
of flags when already possible.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

As part of removing mbus config flags, remove VC flag use in the
microchip-csi2dc driver. The support can be reintroduced later on as part
of the streams patches.

[mchehab: patch accepted by Eugen:  https://lore.kernel.org/linux-media/c0676a4e-803f-9f1c-542b-4b007705ef3d@microchip.com/, so add an accepted-by tag]
Accepted-by: NEugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

QCOM ISPs do not support having a programmable CSI Clock Lane number.

In order to accurately reflect this, the different CSIPHY HW versions
need to have their own register layer for computing lane masks.
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all
the size checking done later in hdmi_infoframe_unpack().  A better
value is the amount of data read into buffer.

Fixes: 480b8b3e ("video/hdmi: Pass buffer size to infoframe unpack functions")
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The vimc driver is used for testing purpose, and some test use cases
involve sharing buffers with a consumer device. Consumers often require
DMA contiguous memory, which vimc doesn't currently support. This leads
in the best case to usage of bounce buffers, which is very slow, and in
the worst case in a complete failure.

Add support for the dma-contig allocator in vimc to support those use
cases properly. The allocator is selected through a new "allocator"
module parameter, which defaults to vmalloc.

[hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig]
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
starting from 0. Thus the end should be the width/height minus 1.

It can be an issue with clipping and rotation, where it will add spurious
lines from uninitialized or unwanted data with a shift in the result.

Fixes: 59a63532 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Tag all the coded formats where the s5p_mfc decoder supports dynamic
resolution switching or has a bytestream parser.
Signed-off-by: NMaxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):

	[  140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
	[  140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G         C OE     5.15.0-rc4-1-surface-mainline #1 b8acf6eb64994414b2e20bad312a7a2c45f748f9
	[  140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
	[  140.230678] Call Trace:
	[  140.230687]  dump_stack_lvl+0x46/0x5a
	[  140.230702]  sysfs_warn_dup.cold+0x17/0x24
	[  140.230710]  sysfs_add_file_mode_ns+0x160/0x170
	[  140.230717]  internal_create_group+0x126/0x390
	[  140.230723]  hmm_init+0x5c/0x70 [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
	[  140.230811]  atomisp_pci_probe.cold+0x1136/0x148e [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
	[  140.230875]  local_pci_probe+0x45/0x80
	[  140.230882]  ? pci_match_device+0xd7/0x130
	[  140.230887]  pci_device_probe+0xfa/0x1b0
	[  140.230892]  really_probe+0x1f5/0x3f0
	[  140.230899]  __driver_probe_device+0xfe/0x180
	[  140.230903]  driver_probe_device+0x1e/0x90
	[  140.230908]  __driver_attach+0xc0/0x1c0
	[  140.230912]  ? __device_attach_driver+0xe0/0xe0
	[  140.230915]  ? __device_attach_driver+0xe0/0xe0
	[  140.230919]  bus_for_each_dev+0x89/0xd0
	[  140.230924]  bus_add_driver+0x12b/0x1e0
	[  140.230929]  driver_register+0x8f/0xe0
	[  140.230933]  ? 0xffffffffc153f000
	[  140.230937]  do_one_initcall+0x57/0x220
	[  140.230945]  do_init_module+0x5c/0x260
	[  140.230952]  load_module+0x24bd/0x26a0
	[  140.230962]  ? __do_sys_finit_module+0xae/0x110
	[  140.230966]  __do_sys_finit_module+0xae/0x110
	[  140.230972]  do_syscall_64+0x5c/0x80
	[  140.230979]  ? syscall_exit_to_user_mode+0x23/0x40
	[  140.230983]  ? do_syscall_64+0x69/0x80
	[  140.230988]  ? exc_page_fault+0x72/0x170
	[  140.230991]  entry_SYSCALL_64_after_hwframe+0x44/0xae
	[  140.230997] RIP: 0033:0x7f7fd5d8718d
	[  140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
	[  140.231006] RSP: 002b:00007ffefc25f0e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
	[  140.231012] RAX: ffffffffffffffda RBX: 000055ac3edcd7f0 RCX: 00007f7fd5d8718d
	[  140.231015] RDX: 0000000000000000 RSI: 000055ac3d723270 RDI: 0000000000000003
	[  140.231017] RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f7fd5e52380
	[  140.231019] R10: 0000000000000003 R11: 0000000000000246 R12: 000055ac3d723270
	[  140.231021] R13: 0000000000000000 R14: 000055ac3edd06e0 R15: 0000000000000000
	[  140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs

The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.

At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.

So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.

[1] added on commit
    d9ab8395 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
    b83cc378 ("atomisp: clean up the hmm init/cleanup indirections")

Link: https://lore.kernel.org/linux-media/20211017162337.44860-3-kitakar@gmail.comSigned-off-by: NTsuchiya Yuto <kitakar@gmail.com>
Co-developed-by: NMauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

There is a BIT(nr) macro available in Linux Kernel,
which does the same thing.
Example: BIT(7) = (1UL << 7)

Link: https://lore.kernel.org/linux-media/20220206185232.21726-1-mosescb.dev@gmail.comSigned-off-by: NMoses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Don't populate the read-only array idx_map on the stack but
instead it static const. Also makes the object code a little smaller.

Link: https://lore.kernel.org/linux-media/20220109195129.46118-1-colin.i.king@gmail.comSigned-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.

Add a DMI quirk table for systems on which to leave eldo2 on.

Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-10-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

On devices with 2 cameras and no _DSM / EFI-vars providing CsiPort
clock info, defaulting to CsiPort 0 obviously is wrong for 1 of the
2 cameras.

The Intel Cherry Trail (ISP2401) reference design combines:
 pmc_plt_clk_2 with CsiPort 0
 pmc_plt_clk_4 with CsiPort 1

The Intel Bay Trail (ISP2400) reference design combines:
 pmc_plt_clk_1 with CsiPort 0
 pmc_plt_clk_0 with CsiPort 1

Use this knowledge to set the default CsiPort value based on
the detected CLK for the sensor.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-9-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Fix axp_v1p8_on() turning ELDO2 off at the end again by removing the bogus
code which turns it off again after just having turned it on.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-8-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

Testing on multiple tablet models has shown that Android always uses
1.6V for ELDO1, adjust our code to match.

This also matches with how ELDO1 is used in the DSDTs on these devices,
where for Cherry Trail (ISP2401) based devices ELDO1 is used for an
ACPI power-resource which is named "P16P".

Note on Bay Trail (ISP2400) based devices the power-resource is called
"P15P", which suggests that 1.5V might be a better value there.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-7-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

On devices with 2 sensors the 2 sensors may get probed simultaneously
and the v1p8 and v2p8 regulators are ususally shared between the
2 sensors.

This means that the probe() function of sensor 1 may end up calling
gmin_v1p8_ctrl(..., false) turning the regulator off while sensor 2's
probe() function still needs it to be on, causing the probe() of
sensor 2 to sometimes fail.

Fix this by adding an enable-count for both regulators and only
disabling them again when that goes to 0.

Note all this really should be converted to use the standard kernel
regulator framework, I have doing this on my long term TODO list,
this fix is only meant as a temporary workaround for the issue.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-6-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

The second write done in axp_regulator_set() must go to the ctrl_reg which
turns the various regulators on/off. This replaces the second write
writing the sel_reg, which sets the voltage for the regulator, for a
second time with a wrong value.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-5-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

There is no irci_stable_candrpv_0415_20150521_0458 build for the
isp2400/byt version of the atomisp2. There is however an
irci_stable_candrpv_0415_20150423_1753 version which according to:
https://github.com/intel/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/cam-041

Has the exact same fw ABI, so use that on the isp2400.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-4-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>

IPS2400 is never defined, for ISP2401 builds ISP2401 gets defined and
for ISP2400 nothing gets defined, so any #ifdef ISP2400 checks should
be #ifndef ISP2401 checks instead.

Link: https://lore.kernel.org/linux-media/20220116215204.307649-3-hdegoede@redhat.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@kernel.org>