As we cannot have an exclusive stream set if the perf has not been
initialized, we only need to check for that exclusive stream.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-3-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

This is called from execlist context init which we need to be unlocked.
Commit f89823c2 ("drm/i915/perf: Implement
I915_PERF_ADD/REMOVE_CONFIG interface") added a lockdep assert to this
path for unclear reasons, remove it again!

Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-2-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Another case where we need to call sysfs_attr_init() to setup the
internal lockdep class prior to use:

[    9.325229] BUG: key ffff880168bc7bb0 not in .data!
[    9.325240] DEBUG_LOCKS_WARN_ON(1)
[    9.325250] ------------[ cut here ]------------
[    9.325280] WARNING: CPU: 1 PID: 275 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[    9.325301] Modules linked in: intel_powerclamp(+) coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915(+) snd_hda_intel snd_hda_codec snd_hwdep r8169 mii snd_hda_core snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel
[    9.325375] CPU: 1 PID: 275 Comm: modprobe Not tainted 4.13.0-rc4-CI-Trybot_1040+ #1
[    9.325395] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0045.B51.1704281422 04/28/2017
[    9.325422] task: ffff8801721a4ec0 task.stack: ffffc900001dc000
[    9.325440] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[    9.325456] RSP: 0018:ffffc900001dfa10 EFLAGS: 00010282
[    9.325473] RAX: 0000000000000016 RBX: ffff880168d54b80 RCX: 0000000000000000
[    9.325488] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0800
[    9.325505] RBP: ffffc900001dfa30 R08: 0000000000000001 R09: 0000000000000000
[    9.325521] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880168bc7bb0
[    9.325537] R13: 0000000000000000 R14: ffff880168bc7b98 R15: ffffffff81a263a0
[    9.325554] FS:  00007fb60c3fd700(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000
[    9.325574] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.325588] CR2: 0000006582777d80 CR3: 000000016d818000 CR4: 00000000003406e0
[    9.325604] Call Trace:
[    9.325618]  __kernfs_create_file+0x76/0xe0
[    9.325632]  sysfs_add_file_mode_ns+0x8a/0x1a0
[    9.325646]  internal_create_group+0xea/0x2c0
[    9.325660]  sysfs_create_group+0x13/0x20
[    9.325737]  i915_perf_register+0xde/0x220 [i915]
[    9.325800]  i915_driver_load+0xa77/0x16c0 [i915]
[    9.325863]  i915_pci_probe+0x37/0x90 [i915]
[    9.325880]  pci_device_probe+0xa8/0x130
[    9.325894]  driver_probe_device+0x29c/0x450
[    9.325908]  __driver_attach+0xe3/0xf0
[    9.325922]  ? driver_probe_device+0x450/0x450
[    9.325935]  bus_for_each_dev+0x62/0xa0
[    9.325948]  driver_attach+0x1e/0x20
[    9.325960]  bus_add_driver+0x173/0x270
[    9.325974]  driver_register+0x60/0xe0
[    9.325986]  __pci_register_driver+0x60/0x70
[    9.326044]  i915_init+0x6f/0x78 [i915]
[    9.326066]  ? 0xffffffffa024e000
[    9.326079]  do_one_initcall+0x43/0x170
[    9.326094]  ? rcu_read_lock_sched_held+0x7a/0x90
[    9.326109]  ? kmem_cache_alloc_trace+0x261/0x2d0
[    9.326124]  do_init_module+0x5f/0x206
[    9.326137]  load_module+0x2561/0x2da0
[    9.326150]  ? show_coresize+0x30/0x30
[    9.326165]  ? kernel_read_file+0x105/0x190
[    9.326180]  SyS_finit_module+0xc1/0x100
[    9.326192]  ? SyS_finit_module+0xc1/0x100
[    9.326210]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[    9.326223] RIP: 0033:0x7fb60bf359f9
[    9.326234] RSP: 002b:00007fff92b47c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    9.326255] RAX: ffffffffffffffda RBX: ffffffff814898a3 RCX: 00007fb60bf359f9
[    9.326271] RDX: 0000000000000000 RSI: 00000028a9ceef8b RDI: 0000000000000000
[    9.326287] RBP: ffffc900001dff88 R08: 0000000000000000 R09: 0000000000000000
[    9.326303] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000040000
[    9.326319] R13: 00000028aaef2a70 R14: 0000000000000000 R15: 00000028aaeee5d0
[    9.326339]  ? __this_cpu_preempt_check+0x13/0x20
[    9.326353] Code: f1 39 00 85 c0 0f 84 38 ff ff ff 83 3d 9f 44 ce 01 00 0f 85 2b ff ff ff 48 c7 c6 b2 a2 c7 81 48 c7 c7 53 40 c5 81 e8 3f 82 01 00 <0f> ff e9 11 ff ff ff 0f 1f 80 00 00 00 00 55 31 c9 31 d2 31 f6

Fixes: 701f8231 ("drm/i915/perf: prune OA configs")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-1-chris@chris-wilson.co.ukReviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>

This is not to try to force a new style; this is my interpretation of
what the most common existing style is.

With hopes I don't need to answer so many questions about style going
forward.

Start a new style section in the i915 document to bolt the register
style guide into.

v2: vertical alignment, incorporate to kernel-doc, and more

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9de4a5b1bea4e76461c70a1dd66751581de0124f.1502368010.git.jani.nikula@intel.com

Revert to a normal comment, as the enum isn't properly documented
anyway.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2c44a0aa00ea7d9b71e7a3183a7507f98811146.1502368010.git.jani.nikula@intel.com

This was based on a patch originally by Kristian. It has been modified
pretty heavily to use the new callbacks from the previous patch.

v2:
  - Add LINEAR and Yf modifiers to list (Ville)
  - Combine i8xx and i965 into one list of formats (Ville)
  - Allow 1010102 formats for Y/Yf tiled (Ville)

v3:
  - Handle cursor formats (Ville)
  - Put handling for LINEAR in the mod_support functions (Ville)

v4:
  - List each modifier explicitly in supported modifiers (Ville)
  - Handle the CURSOR plane (Ville)

v5:
  - Split out cursor and sprite handling (Ville)

v6:
  - Actually use the sprite funcs (Emil)
  - Use unreachable (Emil)

v7:
  - Only allow Intel modifiers and LINEAR (Ben)

v8
  - Fix spite assert introduced in v6 (Daniel)

v9
  - Change vendor check logic to avoid magic 56 (Emil)
  - Reorder skl_mod_support (Ville)
  - make intel_plane_funcs static, could be done as of v5 (Ville)
  - rename local variable intel_format_modifiers to modifiers (Ville)
    - actually use sprite modifiers
  - split out modifier/formats by platform (Ville)

v10:
  - Undo vendor check from v9

v11:
  - Squash CCS advertisement into this patch (daniels)
  - Don't advertise CCS on higher sprite planes (daniels)

v12:
  - Don't advertise Y-tiled or CCS on any sprite planes, since we don't
    allocate enough DDB space for it to work. (daniels)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v8)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Stone <daniels@collabora.com>

SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes
which parts of the main surface are compressed and which are not. The
location of CCS is provided by userspace as just another plane with its
own offset.

Add the required stuff to validate the user provided AUX plane metadata
and convert the user provided linear offset into something the hardware
can consume.

Due to hardware limitations we require that the main surface and
the AUX surface (CCS) be part of the same bo. The hardware also
makes life hard by not allowing you to provide separate x/y offsets
for the main and AUX surfaces (excpet with NV12), so finding suitable
offsets for both requires a bit of work. Assuming we still want keep
playing tricks with the offsets. I've just gone with a dumb "search
backward for suitable offsets" approach, which is far from optimal,
but it works.

Also not all planes will be capable of scanning out compressed surfaces,
and eg. 90/270 degree rotation is not supported in combination with
decompression either.

This patch may contain work from at least the following people:
* Vandana Kannan <vandana.kannan@intel.com>
* Daniel Vetter <daniel@ffwll.ch>
* Ben Widawsky <ben@bwidawsk.net>

v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
    Put the AUX register defines to the correct place
    Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes
    s/return -EINVAL/goto err/ in intel_framebuffer_init()
    Eliminate a bunch hardcoded numbers in CCS code

v5: (By Ben)
conflict resolution +
-               res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
+               res_blocks += fixed16_to_u32_round_up(y_tile_minimum);

v6: (daniels) Fix botched commit message.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: NVille Syrjä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net

SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes which
parts of the main surface are compressed and which are not. The location
of CCS is provided by userspace as just another plane with its own offset.

By providing our own format information for the CCS formats, we should
be able to make framebuffer_check() do the right thing for the CCS
surface as well.

Note that we'll return the same format info for both Y and Yf tiled
format as that's what happens with the non-CCS Y vs. Yf as well. If
desired, we could potentially return a unique pointer for each
pixel_format+tiling+ccs combination, in which case we immediately be
able to tell if any of that stuff changed by just comparing the
pointers. But that does sound a bit wasteful space wise.

v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
v5: Re-drop 'dev', fix commit message, add missing drm_fourcc.h
    description of CCS layout. (daniels)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: NJason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v3)
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NVille Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Stone <daniels@collabora.com>

In the original selftest, we didn't care what the engine->id was, just
that it could uniquely identify it. Later though, we started tracking
the mock engines in the fixed size arrays around the drm_i915_private and
so we now require their indices to be correct. This becomes an issue when
using the standalone harness which runs all available tests at module load,
and so we quickly assign an out-of-bounds index to an engine as we
reallocate the mock GEM device between tests. It doesn't show up in
igt/drv_selftest as that runs each subtest individually.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102045Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809163930.26470-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Bit 29 of SRD_CTL needs to have its value preserved according to the
B-Spec, so right before we write out the register we go ahead and read
the register and preserve the value of that bit before we write out
the configured register value.

v2: Spaces => tabs, minor name change, and commit message wording (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NJim Bride <jim.bride@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502229094-13392-1-git-send-email-jim.bride@linux.intel.com

DDI_E is not supported on CNL-U and CNL-Y

When adding the initial support we noticed DDI_E wasn't supported
and removed it on v4 and v5 of that patch.
However for some reason I missed or put back these 2 chunks.

Time to clean it up to avoid later confusion.

Fixes: 8bcd3dd4 ("drm/i915/cnl: Add power wells for CNL")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808193237.17410-1-rodrigo.vivi@intel.com

As we may have just bound the renderstate into the GGTT for execution, we
need to ensure that the GTT TLB are also flushed.

On snb-gt2, this would cause a random GPU hang at the start of a new
context (e.g. boot) and on snb-gt1, it was causing the renderstate batch
to take ~10s. It was the GPU hang that revealed the truth, as the CS
gleefully executed beyond the end of the golden renderstate batch, a good
indicator for a GTT TLB miss.

Fixes: 20fe17aa ("drm/i915: Remove redundant TLB invalidate on switching contexts")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+

It's dead code, the core handles all this directly now.

The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.

v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.chAcked-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NArchit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.

The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.

What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.chAcked-by: NVincent Abriou <vincent.abriou@st.com>

It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_plane_set_property.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.chReviewed-by: NArchit Taneja <architt@codeaurora.org>
Acked-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

It's dead code because this is now handled in the core.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sushmita Susheelendra <ssusheel@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.chReviewed-by: NArchit Taneja <architt@codeaurora.org>
Acked-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NThomas Hellstrom <thellstrom@vmware.com>

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-12-git-send-email-noralf@tronnes.org

This function is not part of the driver anymore.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 90f4fcd5 ("drm/i915: Remove forced stop ring on suspend/unload")
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804140348.24971-1-lionel.g.landwerlin@intel.com

The purpose of the test was to check per-engine resets would fallback to
the global reset when required, but first we actually need a test for a
basic i915_handle_error()!

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170728112110.6464-1-chris@chris-wilson.co.uk

When we started following the backlight minimum brightness in
6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
we overlooked the brightness invert quirk. Even if we invert the
brightness, we need to take the min limit into account. We probably
missed this because the invert has only been required on gen4 for proper
operation.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101127
Fixes: 6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170531083355.7898-1-jani.nikula@intel.com

In order for us to successfully detect the end of a timeslice,
preemption must be disabled. Otherwise, inside the loop we may be
preempted many times without our noticing, and each time our timeslice
will be reset, invalidating need_resched()
Reported-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: NTomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 290271de ("drm/i915: Spin for struct_mutex inside shrinker")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104135.26805-1-chris@chris-wilson.co.ukTested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Use sysfs_attr_init() to dynamically initialise the
oa_config->sysfs_metric_id.attr as it has the important side-effect of
setting the lockdep key.

[    4.971513] [drm] Initialized i915 1.6.0 20170731 for 0000:00:02.0 on minor 0
[    4.973489] BUG: key ffff88026f6e7bb0 not in .data!
[    4.973506] DEBUG_LOCKS_WARN_ON(1)
[    4.973518] ------------[ cut here ]------------
[    4.973547] WARNING: CPU: 1 PID: 258 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[    4.973567] Modules linked in: i915(+) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii mei lpc_ich prime_numbers i2c_hid pinctrl_broxton pinctrl_intel
[    4.973645] CPU: 1 PID: 258 Comm: systemd-udevd Not tainted 4.13.0-rc3-CI-CI_DRM_2915+ #1
[    4.973664] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
[    4.973686] task: ffff8802704c2740 task.stack: ffffc90000224000
[    4.973700] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[    4.973712] RSP: 0018:ffffc90000227a10 EFLAGS: 00010282
[    4.973726] RAX: 0000000000000016 RBX: ffff880262aac010 RCX: 0000000000000000
[    4.973741] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810ed1ab
[    4.973757] RBP: ffffc90000227a30 R08: 0000000000000001 R09: 0000000000000000
[    4.973774] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88026f6e7bb0
[    4.973789] R13: 0000000000000000 R14: ffff88026f6e7b98 R15: ffffffff81a24da0
[    4.973805] FS:  00007f588d7f58c0(0000) GS:ffff88027fc80000(0000) knlGS:0000000000000000
[    4.973823] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.973837] CR2: 00000082482e32a0 CR3: 0000000270531000 CR4: 00000000003406e0
[    4.973852] Call Trace:
[    4.973864]  __kernfs_create_file+0x71/0xe0
[    4.973876]  sysfs_add_file_mode_ns+0x85/0x1a0
[    4.973890]  internal_create_group+0xe5/0x2b0
[    4.973903]  sysfs_create_group+0xe/0x10
[    4.973985]  i915_perf_register+0xd9/0x220 [i915]
[    4.974044]  i915_driver_load+0xa72/0x16b0 [i915]
[    4.974124]  i915_pci_probe+0x32/0x90 [i915]

Annoyingly detected by CI, but not reported due to it occurring during boot
and disabling lockdep for later runs.

Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Andrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803223700.10329-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>

The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.

Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-10-peda@axentia.se

This WA is required when decoupled frequencies for slice and unslice
are enabled. This disables DOP clock gating for skl.

v2: enable the WA for all gen9 platforms (not just for SKL GT4 where
    the hang issue is originally reported) to avoid rare hangs (David)
v3: as per WaDatabase, enable it only for SKL (Rodrigo)

Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NPraveen Paneri <praveen.paneri@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501781530-8186-1-git-send-email-praveen.paneri@intel.com

No functional change.

KBP was based on SPT and spec wasn't clear about the full name.
There was the initial point of the "Point" confusion.

Later the split with Coffee Lake and Cannon Lake both using CNP
and also some uncertainty from the specs we had at that time
made us to propagated the mistake along.

So, let's fix this now and avoid propagating these wrong
"points".

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185220.758-1-rodrigo.vivi@intel.com

The motivation behind this new interface is expose at runtime the
creation of new OA configs which can be used as part of the i915 perf
open interface. This will enable the kernel to learn new configs which
may be experimental, or otherwise not part of the core set currently
available through the i915 perf interface.

v2: Drop DRM_ERROR for userspace errors (Matthew)
    Add padding to userspace structure (Matthew)
    s/guid/uuid/ (Matthew)

v3: Use u32 instead of int to iterate through registers (Matthew)

v4: Lock access to dynamic config list (Lionel)

v5: by Matthew:
    Fix uninitialized error values
    Fix incorrect unwiding when opening perf stream
    Use kmalloc_array() to store register
    Use uuid_is_valid() to valid config uuids
    Declare ioctls as write only
    Check padding members are set to 0
    by Lionel:
    Return ENOENT rather than EINVAL when trying to remove non
    existing config

v6: by Chris:
    Use ref counts for OA configs
    Store UUID in drm_i915_perf_oa_config rather then using pointer
    Shuffle fields of drm_i915_perf_oa_config to avoid padding

v7: by Chris
    Rename uapi pointers fields to end with '_ptr'

v8: by Andrzej, Marek, Sebastian
    Update register whitelisting
    by Lionel
    Add more register names for documentation
    Allow configuration programming in non-paranoid mode
    Add support for value filter for a couple of registers already
    programmed in other part of the kernel

v9: Documentation fix (Lionel)
    Allow writing WAIT_FOR_RC6_EXIT only on Gen8+ (Andrzej)

v10: Perform read access_ok() on register pointers (Lionel)
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NAndrzej Datczuk <andrzej.datczuk@intel.com>
Reviewed-by: NAndrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-2-lionel.g.landwerlin@intel.com

It makes things easier to read when implementing whitelisting in the
following patches.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com

We already do it on Haswell and the documentation says it saves power.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-5-lionel.g.landwerlin@intel.com

There will be a need for userspaces configurations to set this
register. We can apply the same model inside the kernel for test
configs.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-4-lionel.g.landwerlin@intel.com

In the following commit we'll introduce loadable userspace
configs. This change reworks how configurations are handled in the
perf driver and retains only the test configurations in kernel space.

We now store the test config in dev_priv and resolve the id only once
when opening the perf stream. The OA config is then handled through a
pointer to the structure holding the configuration details.

v2: Rework how test configs are handled (Lionel)

v3: Use u32 to hold number of register (Matthew)

v4: Removed unused dev_priv->perf.oa.current_config variable (Matthew)

v5: Lock device when accessing exclusive_stream (Lionel)

v6: Ensure OACTXCONTROL is always reprogrammed (Lionel)

v7: Switch a couple of index variable from int to u32 (Matthew)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-3-lionel.g.landwerlin@intel.com

We were reserving fewer dwords in the ring than necessary. Indeed
we're always writing all registers once, so discard the actual number
of registers given by the user and just program the whitelisted ones
once.

Fixes: 19f81df2 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reported-by: NMatthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com

Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file or
device_{remove/create}_bin_file. The corresponding arguments are of
type const, so declare the structures to be const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501694447-14356-1-git-send-email-bhumirks@gmail.com

bdw_load_gamma_lut is writing beyond the array to the maximum value.
The intend of the function is to clamp values > 1 to 1, so write
the intended color to the max register.

This fixes the following KASAN warning:

[  197.020857] [IGT] kms_pipe_color: executing
[  197.063434] [IGT] kms_pipe_color: starting subtest ctm-0-25-pipe0
[  197.078989] ==================================================================
[  197.079127] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079188] Read of size 2 at addr ffff8800d38db150 by task kms_pipe_color/1839
[  197.079208] CPU: 2 PID: 1839 Comm: kms_pipe_color Tainted: G     U 4.13.0-rc1-patser+ #5211
[  197.079215] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
[  197.079220] Call Trace:
[  197.079230]  dump_stack+0x68/0x9e
[  197.079239]  print_address_description+0x6f/0x250
[  197.079251]  kasan_report+0x216/0x370
[  197.079374]  ? bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079451]  ? gen8_write16+0x4e0/0x4e0 [i915]
[  197.079460]  __asan_report_load2_noabort+0x14/0x20
[  197.079535]  bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079612]  broadwell_load_luts+0x1df/0x550 [i915]
[  197.079690]  intel_color_load_luts+0x7b/0x80 [i915]
[  197.079764]  intel_begin_crtc_commit+0x138/0x760 [i915]
[  197.079783]  drm_atomic_helper_commit_planes_on_crtc+0x1a3/0x820 [drm_kms_helper]
[  197.079859]  ? intel_pre_plane_update+0x571/0x580 [i915]
[  197.079937]  intel_update_crtc+0x238/0x330 [i915]
[  197.080016]  intel_update_crtcs+0x10f/0x210 [i915]
[  197.080092]  intel_atomic_commit_tail+0x1552/0x3340 [i915]
[  197.080101]  ? _raw_spin_unlock+0x3c/0x40
[  197.080110]  ? __queue_work+0xb40/0xbf0
[  197.080188]  ? skl_update_crtcs+0xc00/0xc00 [i915]
[  197.080195]  ? trace_hardirqs_on+0xd/0x10
[  197.080269]  ? intel_atomic_commit_ready+0x128/0x13c [i915]
[  197.080329]  ? __i915_sw_fence_complete+0x5b8/0x6d0 [i915]
[  197.080336]  ? debug_object_activate+0x39e/0x580
[  197.080397]  ? i915_sw_fence_await+0x30/0x30 [i915]
[  197.080409]  ? __might_sleep+0x15b/0x180
[  197.080483]  intel_atomic_commit+0x944/0xa70 [i915]
[  197.080490]  ? refcount_dec_and_test+0x11/0x20
[  197.080567]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080597]  ? drm_atomic_crtc_set_property+0x303/0x580 [drm]
[  197.080674]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080704]  drm_atomic_commit+0xd7/0xe0 [drm]
[  197.080722]  drm_atomic_helper_crtc_set_property+0xec/0x130 [drm_kms_helper]
[  197.080749]  drm_mode_crtc_set_obj_prop+0x7d/0xb0 [drm]
[  197.080775]  drm_mode_obj_set_property_ioctl+0x50b/0x5d0 [drm]
[  197.080783]  ? __might_fault+0x104/0x180
[  197.080809]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080838]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080861]  drm_ioctl_kernel+0x154/0x1a0 [drm]
[  197.080885]  drm_ioctl+0x624/0x8f0 [drm]
[  197.080910]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080934]  ? drm_getunique+0x210/0x210 [drm]
[  197.080943]  ? __handle_mm_fault+0x1bd0/0x1ce0
[  197.080949]  ? lock_downgrade+0x610/0x610
[  197.080957]  ? __lru_cache_add+0x15a/0x180
[  197.080967]  do_vfs_ioctl+0xd92/0xe40
[  197.080975]  ? ioctl_preallocate+0x1b0/0x1b0
[  197.080982]  ? selinux_capable+0x20/0x20
[  197.080991]  ? __do_page_fault+0x7b7/0x9a0
[  197.080997]  ? lock_downgrade+0x5bb/0x610
[  197.081007]  ? security_file_ioctl+0x57/0x90
[  197.081016]  SyS_ioctl+0x4e/0x80
[  197.081024]  entry_SYSCALL_64_fastpath+0x18/0xad
[  197.081030] RIP: 0033:0x7f61f287a987
[  197.081035] RSP: 002b:00007fff7d44d188 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  197.081043] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f61f287a987
[  197.081048] RDX: 00007fff7d44d1c0 RSI: 00000000c01864ba RDI: 0000000000000003
[  197.081053] RBP: 00007f61f2b3eb00 R08: 0000000000000059 R09: 0000000000000000
[  197.081058] R10: 0000002ea5c4a290 R11: 0000000000000246 R12: 00007f61f2b3eb58
[  197.081063] R13: 0000000000001010 R14: 00007f61f2b3eb58 R15: 0000000000002702

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101659Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NMartin Peres <martin.peres@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Fixes: 82cf435b ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Kiran S Kumar <kiran.s.kumar@intel.com>
Cc: Kausal Malladi <kausalmalladi@gmail.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20170724091431.24251-1-maarten.lankhorst@linux.intel.comReviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Stone <daniels@collabora.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just a simple code cleanup, below commit forgot to remove a
function which it made unused:

 commit eaa14c24
 Author: Chris Wilson <chris@chris-wilson.co.uk>
 Date:   Wed Oct 19 13:52:03 2016 +0100

  drm/i915: Stop reporting error details in dmesg as well as the error-state

  As we already capture all the information from the registers into the
  error-state, also dumping that to dmesg just generates noise that upsets
  CI and users alike (and doesn't provide us with any more information).

v2: Chris Wilson dag out the relevant commit. Commit msg updated.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170727110113.16942-1-tvrtko.ursulin@linux.intel.com

If we fail at punit communication, include both the mbox address and the
value we tried to write so that we can identify the invalid sequence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170728085022.1586-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The hdmi bits simply don't exist, so nerf them. I think audio doesn't
work on gen3 at all, and for the limited color range we should
probably use the colorimetry sdvo paramater instead of the bit in the
port.

But fixing sdvo isn't my goal, I just want to get the backtrace out of
the way, and this takes care of that.

Still, while at it fix the missing read-out of the gen4 audio bit,
maybe that part even works ...

v2: Instead of trying to plug the damage in ->compute_config() make
sure we never set intel_sdvo->is_hdmi, which stops the bad state at
the source. Suggested by Chris Wilson. Also make sure we don't break
this by accident by putting a WARN_ON in place.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726193251.25393-1-daniel.vetter@ffwll.ch

lockdep complaints about a locking recursion for the i2c bus lock
because both the sdvo ddc proxy bus and the gmbus nested within use
the same locking class. It's not really a deadlock since we never nest
the other way round, but it's annoying.

Fix it by pulling the gmbus locking into the i2c lock_ops for both
i2c_adapater and making sure that the ddc_proxy_xfer function is
entirely lockless.

Re-layouting the extracted function resulted in some whitespace
cleanups, I figured we might as well keep them.

v2: Review from Chris:
- s/locked/unlocked/ since I got the naming backwards
- Use the vfuncs of the proxied adatper instead of re-rolling copies.
  That's more consistent with the other proxying we're doing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726132647.31833-1-daniel.vetter@ffwll.ch

When we hold for the lock for swapping out the shmem pages for the
physically contiguous pages, we have to call the unlocked version of
get_pages!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101934
Fixes: 35d23516946e ("drm/i915: Make i915_gem_object_phys_attach() use obj->mm.lock more appropriately")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726181602.23527-2-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>