Currently the user cannot interpret the PLL information based on index
as its exposed as an integer.

This commit exposes ASIC specific PLL indexes and maps it to a generic
FW compatible index.
Signed-off-by: NBharat Jauhari <bjauhari@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The store part was never implemented in the code and never been used
by the userspace applications.

We currently use the related parameters to a different purpose with
a defined union. However, there is no point in that and it is better
to just remove the union and the store parameters.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: NSagiv Ozeri <sozeri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

User must be aware of the available CQs when it needs to use them.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Instead of having it hard-coded as a define, pass it to the user
in runtime.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.

In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Forgot to add the comment for the opcode when it was added.
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add a new CB IOCTL opcode that enables a user to query about a CB and
get its usage count.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

add support for user to request a timestamp upon
cs completion.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

We want to indicate to the user that a certain command submission
is finished long time ago and it is no longer in database.
This means no further information regarding this cs can be obtained.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Once firmware security is enabled, driver must fetch pll frequencies
through the firmware message interface instead of reading the registers
directly.
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The new state indicates that device should be reset in order
to re-gain funcionality.
This unique state can occur if reset_on_lockup is disabled
and an actual lockup has occurred.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.

Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.

Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: NTal Cohen <talcohen@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.

Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

There is a case where the user reaches the maximum number of CS in-flight.
In that case, the driver rejects the new CS of the user with EAGAIN. Count
that event so the user can query the driver later to see if it happened.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.

Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add driver implementation for reading the total energy consumption
from the device ARM FW.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add command submission statistics structure which can be obtained
through the info ioctl. Each drop counter describes the reason for
which the command submission was dropped.
This information is needed for the user to be aware of the specific
reason for which the submitted work was dropped. The user can then
utilize the driver more efficiently.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

MAP/UNMAP are done also for device memory.
Reviewed-by: NOmer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add the new defines for GAUDI uapi interface. It includes the queue IDs,
the engine IDs, SRAM reserved space and Sync Manager reserved resources.

There is no new IOCTL or additional operations in existing IOCTLs.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

For Gaudi the driver gets two new additional properties from the F/W:
1. The card's type - PCI or PMC
2. The card's location in the Gaudi's box (relevant only for PMC).

The card's location is also passed to the user in the HW IP info structure
as it needs this property for establishing communication between Gaudis.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This is a pre-requisite to upstreaming GAUDI support.

Signal/wait operations are done by the user to perform sync between two
Primary Queues (PQs). The sync is done using the sync manager and it is
usually resolved inside the device, but sometimes it can be resolved in the
host, i.e. the user should be able to wait in the host until a signal has
been completed.

The mechanism to define signal and wait operations is done by the driver
because it needs atomicity and serialization, which is already done in the
driver when submitting work to the different queues.

To implement this feature, the driver "takes" a couple of h/w resources,
and this is reflected by the defines added to the uapi file.

The signal/wait operations are done via the existing CS IOCTL, and they use
the same data structure. There is a difference in the meaning of some of
the parameters, and for that we added unions to make the code more
readable.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The user must leave space for 2xMSG_PROT in the external CB, so adjust the
define of max size accordingly. The driver, however, can still create a CB
with the maximum size of 2MB. Therefore, we need to add a check
specifically for the user requested size.
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add a new opcode to the INFO IOCTL that retrieves the device time
alongside the host time, to allow a user application that want to measure
device time together with host time (such as a profiler) to synchronize
these times.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Expose both soft and hard reset counts via INFO IOCTL.
This will allow system management applications to easily check
if the device has undergone reset.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>