Currently the user cannot interpret the PLL information based on index
as its exposed as an integer.

This commit exposes ASIC specific PLL indexes and maps it to a generic
FW compatible index.
Signed-off-by: NBharat Jauhari <bjauhari@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In the case where size is zero the while loop never assigns rc and the
return value is uninitialized. Fix this by initializing rc to zero.

Fixes: 639781dc ("habanalabs/gaudi: add debugfs to DMA from the device")
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Uninitialized scalar variable")
Link: https://lore.kernel.org/r/20210412161012.1628202-1-colin.king@canonical.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We need to print a message to the kernel log in case we encounter
an unknown error in the f/w boot to help the user understand what
happened.

In addition, we shouldn't print unknown error in case of known errors.

Moreover, in case of warnings/info, we shouldn't return -EIO that will
fail the initialization and mark the device as disabled
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

update files to latest version from F/W team.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

As part of the securing GAUDI, the F/W will configure the PCI iATU
regions. If the driver identifies a secured PCI ID, it will know to
skip iATU configuration in a very early stage.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

As F/ security indication must be available before driver approaches
PCI bus, F/W security should be derived from PCI id rather than be
fetched during boot handshake with F/W.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

DRAM scrubbing can take time hence it adds to latency during allocation.
To minimize latency during initialization, scrubbing is moved to release
call.
In case scrubbing fails it means the device is in a bad state,
hence HARD reset is initiated.
Signed-off-by: NBharat Jauhari <bjauhari@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to minimize hard coded values between F/W and the driver, we
send msi-x indexes dynamically to the F/W.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Clearing QM errors by the driver will prevent these H/W blocks from
stopping in case they are configured to stop on errors, so perform this
clearing only if this mode is not in use.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In case of multiple ECC errors, FW will set the DEVICE_UNUSABLE bit.
On boot-up, the driver will therefore fail inserting the device.
Signed-off-by: NKoby Elbaz <kelbaz@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Prefer the use of strscpy when copying the ASIC name into a char array,
to prevent accidentally exceeding the array's length.
In addition, strlcpy is frowned upon so replace it.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

When trying to debug program, the user often needs to
dump large parts of the device's DRAM, which can reach to tens of GBs.
Because reading from the device's internal memory through the PCI BAR
is extremely slow, the debug can take hours.

Instead, we can provide the user to copy data through one of the DMA
engines. This will make the operation much faster.

Currently, only GAUDI is supported.

In GAUDI, we need to find a PCI DMA engine that is IDLE and set the
DMA as secured to be able to bypass our MMU as we currently don't
map the temporary buffer to the MMU.

Example bash one-line to dump entire HBM to file (~2 minutes):

for (( i=0x0; i < 0x800000000; i+=0x8000000 )); do \
printf '0x%x\n' $i | sudo tee /sys/kernel/debug/habanalabs/hl0/addr ; \
echo 0x8000000 | sudo tee /sys/kernel/debug/habanalabs/hl0/dma_size ; \
sudo cat /sys/kernel/debug/habanalabs/hl0/data_dma >> hbm.txt ; done
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Since we moved the SOB reset flow to workqueue and
not part of the fence release flow, we might reach a
scenario where new context is created while we in the middle
of resetting the SOB.
in such cases the reset may fail due to idle check.
This will mess up the streams sync since the SOB value is invalid.
so we protect this area with a mutex, to delay context creation.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: NAlon Mizrahi <amizrahi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The new approach is based on the notion that the relative
current power consumption is in relation of proportionality
to device's true utilization.
Utilization info ranges between [0,100]%
Currently, dc_power values are hard-coded.
Signed-off-by: NKoby Elbaz <kelbaz@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to shorten the time cs lock is being held, we move any
possible work outside of the cs lock.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add a little sleep between page unmappings in case mapping of
large number of host pages failed, in order to
avoid soft lockup bug during the rollback.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Update with latest version from the Firmware team.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Unsecure relevant registers as TPC engine need access to
TPC status.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The device can get into deadlock in case it use indirect mode for MSI
interrupts (multi-msi) and have hard-reset during interrupt storm.

To prevent that, always use direct mode which means single-msi mode.

The F/W will prevent the host from writing to the indirect MSI
registers to prevent any malicious user from causing this scenario.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In case the BMC of the devices' box wants to initiate a reset of
a specific device, it must go through driver.
Once driver will receive the request it will initiate a hard reset
flow.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to have a better debuggability we allow debugfs access
to user mmu mapped host memory. Non-user host memory access will be
rejected.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

fixed the following coccicheck:
./drivers/misc/habanalabs/common/sysfs.c:347:60-61: WARNING opportunity
for kobj_to_dev()
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Update to the latest version of the file as supplied by the F/W.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

As there are incorrect assumptions in which some of the
initialization and data path flows cannot sleep, most allocations
are being done using GFP_ATOMIC.
We modify the code to use GFP_ATOMIC only when realy needed, as
sleepable flow should use GFP_KERNEL.
In addition add a fallback to allocate memory using GFP_KERNEL,
once ATOMIC allocation fails.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Update to the latest definition of the firmware
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: NSagiv Ozeri <sozeri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Improve "vm" debugfs node to print also the virtual addresses which are
currently mapped to HW blocks in the device.
Signed-off-by: NSagiv Ozeri <sozeri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

For simplicity, use a single bringup flag indicating which FW
binaries should loaded to device.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Timeout in wait for interrupt is in 32-bit variable so we need to use
the correct maximum value to compare.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

As the F/wW is the first to detect out of sync event, a new event is
added to notify the driver on such event. In which case the driver
performs hard reset.
Signed-off-by: NOhad Sharabi <osharabi@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Because our graph contains network operations, we need to account
for delay in the network.

5 seconds timeout per CS is not enough to account for that.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Notify to the user that although he closed the FD, the device is
still in use because there are live CS and/or memory mappings (mmaps).
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Move the field to correct location in structure and remove comment.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.

If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>