Enable panel OTM8009A and panel raydium RM68200 as loadable modules.
Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Enable DRM and MIPI DSI support for STMicroelectronics as loadable module.
Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Enable the STM32 SPI driver, implemented on STM32MP1 SoC.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Enable the thermal monitor driver and the AVE ethernet driver
implemented on UniPhier SoCs.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable support for the Renesas RZN1D-DB Board:
  - RZ/N1D (R9A06G032) base SoC support.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add Marvell NAND controller support used by some Marvell Armada based
boards.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Enables support of STM32 DCMI V4L2 media driver.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This enables drivers for STM32:
 - DMAv2
 - DMMAUX
 - MDMA
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Enable the STM32 Real Time Clock (RTC) driver, implemented on STM32MP1 SoC.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol has
been renamed and lost the MFD_ prefix, so update all configs to the new
config symbol name.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NBenson Leung <bleung@chromium.org>

The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: NOlof Johansson <olof@lixom.net>

The patch enables the hwmon driver for the Raspberry Pi.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>

R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable
its driver by default. It is enabled as a module to avoid increasing
the kernel image size.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This patch adds STM32F7 I2C support to multi_v7_defconfig and
enable the STM32 USB PHY Controller (USBPHYC) driver, implemented on
STM32MP1 SoC.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This enables the Amlogic Meson PWM controller. It is used for a dimmable
LED on some devices. Additionally some devices use it to generate the
32.768 kHz (low power oscillator) clock.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

Some boards come with a PMIC (system power controller, for example Ricoh
RN5T618) which is connected through I2C.
Enable the Meson I2C driver so the devices on the I2C bus can be
registered during boot.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and
a Cypress CYW43455 (connect via UART). This patch enables the necessary
drivers.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

The last Renesas ARM platform using this driver was removed in commit
a521422e ("ARM: shmobile: mackerel: Remove Legacy C board
code").
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add a module with Samsung S6E63J0X03 DSI panel driver to enable support
for display panel on Exynos3250-based Samsung Rinato board.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Enable recently added r8a77470 (RZ/G1C) SoC.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Reviewed-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable FlexCAN support as module by default. FlexCAN can be found
on various NXP designs such as the i.MX and Vybrid SoC family.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable the i.MX thermal driver required for i.MX SoC family.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable drivers to support NXP graphics IPs such as:
- Etnaviv (e.g. i.MX6)
- DCU (e.g. Vybrid LS1021A)
- mxsfb (e.g. i.MX6UL/ULL/7)
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add GPMI NAND controller support as required by some NXP i.MX6/7
based boards.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the driver is built-in (e.g. i.MX thermal
driver).
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful boot. Make sure I2C driver for i.MX devices is
built-in.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that users probably want to also
enable serial 8250_OMAP that is not yet enabled by default.
Signed-off-by: NTony Lindgren <tony@atomide.com>

With USB OTG now enabled, it makes sense to allow configuring the
USB gadgets via configfs.
Signed-off-by: NTony Lindgren <tony@atomide.com>

With MUSB USB OTG controller enabled, let's now enable the USB PHYs
found on omap varian SoCs.
Signed-off-by: NTony Lindgren <tony@atomide.com>

We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
their related DMA hardware.

And as MUSB is an USB OTG controller, let's enable OTG support too.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's
can use sdhci-omap for eMMC/SD/SDIO controller..
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This turns on the CONFIG_BCM2835_THERMAL as module for
Raspberry Pi 2 and 3.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This patch adds stm32 support to multi_v7_defconfig
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

The Raspberry Pi 3 uses the 8250-based auxilary UART of the BCM2837 SoC
as the primary serial console of the board, so enable it in the
multiplatform defconfig.
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.

Spring cleanup time.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com

Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable PWM support for R-Car and friends by default.
Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: NBiju Das <biju.das@bp.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable following drivers for recently merged devices:
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI
- Sii9234 DRM HDMI-MHL bridge for Trats2
- dedicated Odroid ASoC machine driver for Odroid XU3/XU4
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOTEPROC=m in multi_v7_defconfig.
Signed-off-by: NAnup Patel <anup@brainfault.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>