- 14 7月, 2016 4 次提交
-
-
由 Joerg Roedel 提交于
Before a dma_ops_domain can be freed, we need to make sure it is not longer referenced by the flush queue. So empty the queue before a dma_ops_domain can be freed. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
This domain type is not yet handled in the iommu_ops->domain_free() call-back. Fix that. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Using the cached value is much more efficient than calling into the IOMMU core code. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Optimize these functions so that they need only one call into the address alloctor. This also saves a couple of io-tlb flushes in the unmap_sg path. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 13 7月, 2016 16 次提交
-
-
由 Joerg Roedel 提交于
This function converts dma_data_direction to iommu-protection flags. This will be needed on multiple places in the code, so this will save some code. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
In case the queue doesn't fill up, we flush the TLB at least 10ms after the unmap happened to make sure that the TLB is cleaned up. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
With the flush queue the IOMMU TLBs will not be flushed at every dma-ops unmap operation. The unmapped ranges will be queued and flushed at once, when the queue is full. This makes unmapping operations a lot faster (on average) and restores the performance of the old address allocator. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
If domain == NULL is passed to the function, it will queue a completion-wait command on all IOMMUs in the system. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
The flush queue is the equivalent to defered-flushing in the Intel VT-d driver. This patch sets up the data structures needed for this. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
This parameter is not required anymore because the iova-allocations are always aligned to its size. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
There are other remains in the code from the old allocatore. Remove them all. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Remove the old address allocation code and make use of the generic IOVA allocator that is also used by other dma-ops implementations. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Use the iommu-api map/unmap functions instead. This will be required anyway when IOVA code is used for address allocation. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Make this function ready to be used in the DMA-API path. Reorder parameters a bit while at it. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
It is used to reserve the dm-regions in the iova-tree. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Put the MSI-range, the HT-range and the MMIO ranges of PCI devices into that range, so that these addresses are not allocated for DMA. Copy this address list into every created dma_ops_domain. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Use it later for allocating the IO virtual addresses. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
Include the generic IOVA code to make use of it in the AMD IOMMU driver too. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
This new call-back will be used by the iommu driver to do reserve the given dm_region in its iova space before the mapping is created. The call-back is temporary until the dma-ops implementation is part of the common iommu code. Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Joerg Roedel 提交于
The default domain for a device might also be identity-mapped. In this case the kernel would crash when unity mappings are defined for the device. Fix that by making sure the domain is a dma_ops domain. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 21 6月, 2016 1 次提交
-
-
由 Bhaktipriya Shridhar 提交于
alloc_workqueue replaces deprecated create_workqueue(). A dedicated workqueue has been used since the workitem (viz &fault->work), is involved in IO page-fault handling. WQ_MEM_RECLAIM has been set to guarantee forward progress under memory pressure, which is a requirement here. Since there are only a fixed number of work items, explicit concurrency limit is unnecessary. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 15 6月, 2016 1 次提交
-
-
由 Wan Zongshun 提交于
AMD has more drivers will use ACPI to platform bus driver later, all those devices need iommu support, for example: eMMC driver. For latest AMD eMMC controller, it will utilize sdhci-acpi.c driver, which will rely on platform bus to match device and driver, where we will set 'dev' of struct platform_device as map_sg parameter passing to iommu driver for DMA request, so the iommu-ops are needed on the platform bus. Signed-off-by: NWan Zongshun <Vincent.Wan@amd.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 12 6月, 2016 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management fixes from Zhang Rui: - fix an ordering issue in cpu cooling that cooling device is registered before it's ready (freq_table being populated). (Lukasz Luba) - fix a missing comment update (Caesar Wang) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: add the note for set_trip_temp thermal: cpu_cooling: fix improper order during initialization
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current series. This contains: - Two fixes for xen-blkfront, from Bob Liu. - A bug fix for NVMe, releasing only the specific resources we requested. - Fix for a debugfs flags entry for nbd, from Josef. - Plug fix from Omar, fixing up a case of code being switched between two functions. - A missing bio_put() for the new discard callers of submit_bio_wait(), fixing a regression causing a leak of the bio. From Shaun. - Improve dirty limit calculation precision in the writeback code, fixing a case where setting a limit lower than 1% of memory would end up being zero. From Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Only release requested regions xen-blkfront: fix resume issues after a migration xen-blkfront: don't call talk_to_blkback when already connected to blkback nbd: pass the nbd pointer for flags debugfs block: missing bio_put following submit_bio_wait blk-mq: really fix plug list flushing for nomerge queues writeback: use higher precision calculation in domain_dirty_limits()
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "A new bunch of GPIO fixes for v4.7. This time I am very grateful that Ricardo Ribalda Delgado went in and fixed my stupid refcounting mistakes in the removal path for GPIO chips. I had a feeling something was wrong here and so it was. It exploded on OMAP and it fixes their problem. Now it should be (more) solid. The rest i compilation, Kconfig and driver fixes. Some tagged for stable. Summary: - Fix a NULL pointer dereference when we are searching the GPIO device list but one of the devices have been removed (struct gpio_chip pointer is NULL). - Fix unaligned reference counters: we were ending on +3 after all said and done. It should be 0. Remove an extraneous get_device(), and call cdev_del() followed by device_del() in gpiochip_remove() instead and the count goes to zero and calls the release() function properly. - Fix a compile warning due to a missing #include in the OF/device tree portions. - Select ANON_INODES for GPIOLIB, we're using that for our character device. Some randconfig tests disclosed the problem. - Make sure the Zynq driver clock runs also without CONFIG_PM enabled - Fix an off-by-one error in the 104-DIO-48E driver - Fix warnings in bcm_kona_gpio_reset()" * tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings gpio: select ANON_INODES gpio: include <linux/io-mapping.h> in gpiolib-of gpiolib: Fix unaligned used of reference counters gpiolib: Fix NULL pointer deference gpio: zynq: initialize clock even without CONFIG_PM gpio: 104-dio-48e: Fix control port offset computation off-by-one error
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Two current fixes: - one affects Qemu CD ROM emulation, which stopped working after the updates in SCSI to require VPD pages from all conformant devices. Fix temporarily by blacklisting Qemu (we can relax later when they come into compliance). - The other is a fix to the optimal transfer size. We set up a minefield for ourselves by being confused about whether the limits are in bytes or sectors (SCSI optimal is in blocks and the queue parameter is in bytes). This tries to fix the problem (wrong setting for queue limits max_sectors) and make the problem more obvious by introducing a wrapper function" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix rw_max for devices that report an optimal xfer size scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: - a bigger fix for i801 to finally be able to be loaded on some machines again - smaller driver fixes - documentation update because of a renamed file * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mux: reg: Provide of_match_table i2c: mux: refer to i2c-mux.txt i2c: octeon: Avoid printk after too long SMBUS message i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull DeviceTree fixes from Rob Herring: - fix unflatten_dt_nodes when dad parameter is set. - add vendor prefixes for TechNexion and UniWest - documentation fix for Marvell BT - OF IRQ kerneldoc fixes - restrict CMA alignment adjustments to non dma-coherent - a couple of warning fixes in reserved-memory code - DT maintainers updates * tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes() drivers: of: Fix of_pci.h header guard dt-bindings: Add vendor prefix for TechNexion of: add vendor prefix for UniWest dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF of: silence warnings due to max() usage drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent of: irq: fix of_irq_get[_byname]() kernel-doc MAINTAINERS: DeviceTree maintainer updates
-
由 Linus Torvalds 提交于
Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux Pull uvc compat XU ioctl fixes from Andy Lutomirski: "uvc's compat XU ioctls go through tons of potentially buggy indirection. The first patch removes the indirection. The second one cleans up the code. Compile-tested only. I have the hardware, but I have absolutely no idea what XU does, how to use it, what software to recompile as 32-bit, or what to test in that software" * tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux: uvc_v4l2: Simplify compat ioctl implementation uvc: Forward compat ioctls to their handlers directly
-
- 11 6月, 2016 10 次提交
-
-
由 Andy Lutomirski 提交于
The uvc compat ioctl implementation seems to have copied user data for no good reason. Remove a bunch of copies. Signed-off-by: NAndy Lutomirski <luto@kernel.org>
-
由 Andy Lutomirski 提交于
The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by: NAndy Lutomirski <luto@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "Has some fixes and some new self tests for btrfs. The self tests are usually disabled in the .config file (unless you're doing btrfs dev work), and this bunch is meant to find problems with the 64K page size patches. Jeff has a patch to help people see if they are using the hardware assist crc32c module, which really helps us nail down problems when people ask why crcs are using so much CPU. Otherwise, it's small fixes" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize Btrfs: self-tests: Use macros instead of constants and add missing newline Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE btrfs: advertise which crc32c implementation is being used at module load Btrfs: add validadtion checks for chunk loading Btrfs: add more validation checks for superblock Btrfs: clear uptodate flags of pages in sys_array eb Btrfs: self-tests: Support non-4k page size Btrfs: Fix integer overflow when calculating bytes_per_bitmap Btrfs: test_check_exists: Fix infinite loop when searching for free space entries Btrfs: end transaction if we abort when creating uuid root btrfs: Use __u64 in exported linux/btrfs.h.
-
由 Linus Torvalds 提交于
Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from - ptrace: Fix out of bounds array access warning from Khem Raj - pseries: Fix PCI config address for DDW from Gavin Shan - pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added from Michael Ellerman - of: fix autoloading due to broken modalias with no 'compatible' from Wolfram Sang - radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh Kumar K.V - hash: Compute the segment size correctly for ISA 3.0 from Aneesh Kumar K.V - nohash: Fix build break with 64K pages from Michael Ellerman * tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/nohash: Fix build break with 64K pages powerpc/mm/hash: Compute the segment size correctly for ISA 3.0 powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT of: fix autoloading due to broken modalias with no 'compatible' powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added powerpc/pseries: Fix PCI config address for DDW powerpc/ptrace: Fix out of bounds array access warning
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - fix regression in fam15h_power driver - minor variable type fix in lm90 driver - document compatible statement for ina2xx driver * tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) use proper type for update_interval hwmon: (ina2xx) Document compatible for INA231 hwmon: (fam15h_power) Disable preemption when reading registers
-
由 Linus Torvalds 提交于
Merge filesystem stacking fixes from Jann Horn. * emailed patches from Jann Horn <jannh@google.com>: sched: panic on corrupted stack end ecryptfs: forbid opening files without mmap handler proc: prevent stacking filesystems on top
-
由 Jann Horn 提交于
Until now, hitting this BUG_ON caused a recursive oops (because oops handling involves do_exit(), which calls into the scheduler, which in turn raises an oops), which caused stuff below the stack to be overwritten until a panic happened (e.g. via an oops in interrupt context, caused by the overwritten CPU index in the thread_info). Just panic directly. Signed-off-by: NJann Horn <jannh@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jann Horn 提交于
This prevents users from triggering a stack overflow through a recursive invocation of pagefault handling that involves mapping procfs files into virtual memory. Signed-off-by: NJann Horn <jannh@google.com> Acked-by: NTyler Hicks <tyhicks@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jann Horn 提交于
This prevents stacking filesystems (ecryptfs and overlayfs) from using procfs as lower filesystem. There is too much magic going on inside procfs, and there is no good reason to stack stuff on top of procfs. (For example, procfs does access checks in VFS open handlers, and ecryptfs by design calls open handlers from a kernel thread that doesn't drop privileges or so.) Signed-off-by: NJann Horn <jannh@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fix from Will Deacon: "A fix for an issue that Alex saw whilst swapping with hardware access/dirty bit support enabled in the kernel: Fix a failure to fault in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always take dirty state from new pte in ptep_set_access_flags
-