- 03 10月, 2015 34 次提交
-
-
由 David S. Miller 提交于
Simon Horman says: ==================== ravb: Add support for r8a7795 SoC please consider this series for net-next. It enhances the ravb driver to support the r8a7795 SoC. Changes: * Dropped RFC prefix * Details in changelog of individual patches Base: * net-next/master Availability: To aid review of this in conjunction with other EtherAVB changes the following branches are available in my renesas tree on kernel.org. * me/r8a7795-ravb-driver-v4: this series * me/r8a7795-ravb-pfc-v2: r8a7795 sh-pfc update for EthernetAVB * me/r8a7795-ravb-integration-v4: enable EthernetAVB on r8a7795 * me/r8a7795-ravb-driver-and-integration-v4.runtime: the above three branches with their runtime dependencies ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazuya Mizuguchi 提交于
This patch supports the r8a7795 SoC by: - Using two interrupts + One for E-MAC + One for everything else + Both can be handled by the existing common interrupt handler, which affords a simpler update to support the new SoC. In future some consideration may be given to implementing multiple interrupt handlers - Limiting the phy speed to 100Mbit/s for the new SoC; at this time it is not clear how this restriction may be lifted but I hope it will be possible as more information comes to light Signed-off-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [horms: reworked] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazuya Mizuguchi 提交于
This patch updates the ravb binding to support the r8a7795 SoC by: - Adding a compat string for the new hardware - Adding 25 named interrupts to binding for the new SoC; older SoCs continue to use a single multiplexed interrupt The example is also updated to reflect the r8a7795 as this is the more complex case. Based on work by Kazuya Mizuguchi and others. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazuya Mizuguchi 提交于
This patch is in preparation for using this driver on arm64 where the implementation of __dma_alloc_coherent fails if a device parameter is not provided. Signed-off-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NMasaru Nagai <masaru.nagai.vx@renesas.com> [horms: squashed into a single patch] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Add a helper to allow ethernet drivers to limit the speed of a phy (that they are attached to). This mainly involves factoring out the business-end of of_set_phy_supported() and exporting a new symbol. This code seems to be open coded in several places, in several different variants. It is is envisaged that this will be used in situations where setting the "max-speed" property in DT is not appropriate, e.g. because the maximum speed is not a property of the phy hardware. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== BPF updates Some minor updates to {cls,act}_bpf to retrieve routing realms and to make skb->priority writable. Thanks! v1 -> v2: - Dropped preclassify patch for now from the series as the rest is pretty much independent of it - Rest unchanged, only rebased and already posted Acked-by's kept ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
{cls,act}_bpf can now set the skb->priority from an eBPF program based on various critera, so that for example classful qdiscs like multiq can update the skb's priority during enqueue time and further push it down into subsequent qdiscs. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Using routing realms as part of the classifier is quite useful, it can be viewed as a tag for one or multiple routing entries (think of an analogy to net_cls cgroup for processes), set by user space routing daemons or via iproute2 as an indicator for traffic classifiers and later on processed in the eBPF program. Unlike actions, the classifier can inspect device flags and enable netif_keep_dst() if necessary. tc actions don't have that possibility, but in case people know what they are doing, it can be used from there as well (e.g. via devs that must keep dsts by design anyway). If a realm is set, the handler returns the non-zero realm. User space can set the full 32bit realm for the dst. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
As we need to add further flags to the bpf_prog structure, lets migrate both bools to a bitfield representation. The size of the base structure (excluding insns) remains unchanged at 40 bytes. Add also tags for the kmemchecker, so that it doesn't throw false positives. Even in case gcc would generate suboptimal code, it's not being accessed in performance critical paths. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== switchdev: bring back switchdev_obj Second version of the patch extends to a patchset. Basically this patchset brings object structure back which disappeared with recent Vivien's patchset. Also it does a bit of naming changes in order to get the things in line. Also, object id is put back into object structure. Thanks to Scott and Vivien for review and suggestions. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Suggested-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Make the struct name in sync with object id name. Suggested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Make the struct name in sync with object id name. Suggested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
To be aligned with obj. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Suggested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== tcp/dccp: lockless listener TCP listener refactoring : this is becoming interesting ! This patch series takes the steps to use normal TCP/DCCP ehash table to store SYN_RECV requests, instead of the private per-listener hash table we had until now. SYNACK skb are now attached to their syn_recv request socket, so that we no longer heavily modify listener sk_wmem_alloc. listener lock is no longer held in fast path, including SYNCOOKIE mode. During my tests, my server was able to process 3,500,000 SYN packets per second on one listener and still had available cpu cycles. That is about 2 to 3 order of magnitude what we had with older kernels. This effort started two years ago and I am pleased to reach expectations. We'll probably extend SO_REUSEPORT to add proper cpu/numa affinities, so that heavy duty TCP servers can get proper siloing thanks to multi-queues NIC. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Everything should now be ready to finally allow SYN packets processing without holding listener lock. Tested: 3.5 Mpps SYNFLOOD. Plenty of cpu cycles available. Next bottleneck is the refcount taken on listener, that could be avoided if we remove SLAB_DESTROY_BY_RCU strict semantic for listeners, and use regular RCU. 13.18% [kernel] [k] __inet_lookup_listener 9.61% [kernel] [k] tcp_conn_request 8.16% [kernel] [k] sha_transform 5.30% [kernel] [k] inet_reqsk_alloc 4.22% [kernel] [k] sock_put 3.74% [kernel] [k] tcp_make_synack 2.88% [kernel] [k] ipt_do_table 2.56% [kernel] [k] memcpy_erms 2.53% [kernel] [k] sock_wfree 2.40% [kernel] [k] tcp_v4_rcv 2.08% [kernel] [k] fib_table_lookup 1.84% [kernel] [k] tcp_openreq_init_rwin Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If a listener with thousands of children in accept queue is dismantled, it can take a while to close all of them. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This control variable was set at first listen(fd, backlog) call, but not updated if application tried to increase or decrease backlog. It made sense at the time listener had a non resizeable hash table. Also rounding to powers of two was not very friendly. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It is enough to check listener sk_state, no need for an extra condition. max_qlen_log can be moved into struct request_sock_queue We can remove syn_wait_lock and the alignment it enforced. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If a listen backlog is very big (to avoid syncookies), then the listener sk->sk_wmem_alloc is the main source of false sharing, as we need to touch it twice per SYNACK re-transmit and TX completion. (One SYN packet takes listener lock once, but up to 6 SYNACK are generated) By attaching the skb to the request socket, we remove this source of contention. Tested: listen(fd, 10485760); // single listener (no SO_REUSEPORT) 16 RX/TX queue NIC Sustain a SYNFLOOD attack of ~320,000 SYN per second, Sending ~1,400,000 SYNACK per second. Perf profiles now show listener spinlock being next bottleneck. 20.29% [kernel] [k] queued_spin_lock_slowpath 10.06% [kernel] [k] __inet_lookup_established 5.12% [kernel] [k] reqsk_timer_handler 3.22% [kernel] [k] get_next_timer_interrupt 3.00% [kernel] [k] tcp_make_synack 2.77% [kernel] [k] ipt_do_table 2.70% [kernel] [k] run_timer_softirq 2.50% [kernel] [k] ip_finish_output 2.04% [kernel] [k] cascade Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
inet6_csk_search_req() and inet6_csk_reqsk_queue_hash_add() no longer exist. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We no longer use hash_rnd, nr_table_entries and syn_table[] For a listener with a backlog of 10 millions sockets, this saves 80 MBytes of vmalloced memory. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In this patch, we insert request sockets into TCP/DCCP regular ehash table (where ESTABLISHED and TIMEWAIT sockets are) instead of using the per listener hash table. ACK packets find SYN_RECV pseudo sockets without having to find and lock the listener. In nominal conditions, this halves pressure on listener lock. Note that this will allow for SO_REUSEPORT refinements, so that we can select a listener using cpu/numa affinities instead of the prior 'consistent hash', since only SYN packets will apply this selection logic. We will shrink listen_sock in the following patch to ease code review. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ying Cai <ycai@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This is no longer used. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When request sockets are no longer in a per listener hash table but on regular TCP ehash, we need to access listener uid through req->rsk_listener get_openreq6() also gets a const for its request socket argument. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Once listener is lockless, its sk_state can change anytime. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We'll soon have to call tcp_v[46]_inbound_md5_hash() twice. Also add const attribute to the socket, as it might be the unlocked listener for SYN packets. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We plan to use generic functions to insert request sockets into ehash table. sk_prot needs to be set (to retrieve sk_prot->h.hashinfo) sk_node needs to be cleared. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This fixes a typo : We want to store the NAPI id on child socket. Presumably nobody really uses busy polling, on short lived flows. Fixes: 3d97379a ("tcp: move sk_mark_napi_id() at the right place") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
long term plan is to remove struct listen_sock when its hash table is no longer there. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
qlen_inc & young_inc were protected by listener lock, while qlen_dec & young_dec were atomic fields. Everything needs to be atomic for upcoming lockless listener. Also move qlen/young in request_sock_queue as we'll get rid of struct listen_sock eventually. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
struct request_sock_queue fields are currently protected by the listener 'lock' (not a real spinlock) We need to add a private spinlock instead, so that softirq handlers creating children do not have to worry with backlog notion that the listener 'lock' carries. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2015 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.3 rc4: MMC core: - Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is unset - Prevent infinite loop of re-tuning for CRC-errors for CMD19 and CMD21 MMC host: - pxamci: Fix issues with card detect - sunxi: Fix clk-delay settings" * tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: core: fix dead loop of mmc_retune mmc: pxamci: fix card detect with slot-gpio API mmc: sunxi: Fix clk-delay settings mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset
-
git://git.infradead.org/intel-iommu由 Linus Torvalds 提交于
Pull IOVA fixes from David Woodhouse: "The main fix here is the first one, fixing the over-allocation of size-aligned requests. The other patches simply make the existing IOVA code available to users other than the Intel VT-d driver, with no functional change. I concede the latter really *should* have been submitted during the merge window, but since it's basically risk-free and people are waiting to build on top of it and it's my fault I didn't get it in, I (and they) would be grateful if you'd take it" * git://git.infradead.org/intel-iommu: iommu: Make the iova library a module iommu: iova: Export symbols iommu: iova: Move iova cache management to the iova library iommu/iova: Avoid over-allocating when size-aligned
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dmapool: fix overflow condition in pool_find_page() thermal: avoid division by zero in power allocator memcg: remove pcp_counter_lock kprobes: use _do_fork() in samples to make them work again drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE memcg: make mem_cgroup_read_stat() unsigned memcg: fix dirty page migration dax: fix NULL pointer in __dax_pmd_fault() mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1) userfaultfd: remove kernel header include from uapi header arch/x86/include/asm/efi.h: fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes mostly, for a few changes made in this cycle (the intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and for some issues that have just been discovered (ACPI PCI IRQ management, PCI power management documentation, turbostat), with a couple of cleanups on top of them. Specifics: - intel_idle driver fixup for the recently added Skylake chips support (Len Brown). - Operating Performance Points (OPP) library fix related to the recently added support for new DT bindings and a fix for a typo in a comment (Viresh Kumar, Stephen Boyd). - ACPI EC driver fix for a recently introduced memory leak in an error code path (Lv Zheng). - ACPI PCI IRQ management fix for the issue where an ISA IRQ is shared with a PCI device which requires it to be configured in a different way and may cause an interrupt storm to happen as a result with an extra ACPI SCI IRQ handling simplification on top of it (Jiang Liu). - Update of the PCI power management documentation that became outdated and started to actively confuse the readers to make it actually reflect the code (Rafael J Wysocki). - turbostat fixes including an IVB Xeon regression fix (related to the --debug command line option), Skylake adjustment for the TSC running at a frequency that doesn't match the base one exactly, and a Knights Landing quirk to account for the fact that it only updates APERF and MPERF every 1024 clock cycles plus bumping up the turbostat version number (Len Brown, Hubert Chrzaniuk)" * tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power turbosat: update version number tools/power turbostat: SKL: Adjust for TSC difference from base frequency tools/power turbostat: KNL workaround for %Busy and Avg_MHz tools/power turbostat: IVB Xeon: fix --debug regression ACPI / PCI: Remove duplicated penalty on SCI IRQ ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ ACPI / EC: Fix a memory leak issue in acpi_ec_query() PM / OPP: Fix typo modifcation -> modification PCI / PM: Update runtime PM documentation for PCI devices PM / OPP: of_property_count_u32_elems() can return errors intel_idle: Skylake Client Support - updated
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
-