Use tabs (not spaces) for indentation.  No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Apparently the PCIe capability is at address 0x40 in config space of X-Gene
v1 Root Ports.  Add a definition of that and use the generic PCI_EXP_RTCTL
offset into the capability.  No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Duc Dang <dhdang@apm.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NNiklas Cassel <niklas.cassel@axis.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Reported-by: NBjorn Helgaas <helgaas@kernel.org>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>

Use tabs (not spaces) for indentation.  No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

PCI_EXP_CAP is an iProc-specific value, so rename it to IPROC_PCI_EXP_CAP
to make it obvious that it's not related to the generic values like
PCI_EXP_RTCTL, etc.  No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

During soft reset (e.g., "reboot" from Linux) on some iProc-based SOCs, the
LCPLL clock and PERST both go off simultaneously.  This seems in accordance
with the PCIe Card Electromechanical spec, r2.0, sec 2.2.3, which says the
clock goes inactive after PERST# goes active, but doesn't specify how long
the clock should be valid after PERST#.

However, we have observed that with the iProc Stingray, some Intel NVMe
endpoints, e.g., the P3700 400GB series, are not detected correctly upon
the next boot sequence unless the clock remains valid for some time after
PERST# is asserted.

Delay 500ms after asserting PERST# before performing a reboot.  The 500ms
is experimentally determined.
Signed-off-by: NOza Pawandeep <oza.oza@broadcom.com>
[bhelgaas: changelog, add spec reference, fold in iproc_pcie_shutdown()
export from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>

Fix various typos and whitespace errors:

  s/Synopsis/Synopsys/
  s/Designware/DesignWare/
  s/Keystine/Keystone/
  s/gpio/GPIO/
  s/pcie/PCIe/
  s/phy/PHY/
  s/confgiruation/configuration/

No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The "res" variable in pci_resource_io() is never used.  Remove it.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

VMD currently only exists for Intel x86 products, so move the VMD quirk to
arch/x86.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

VMD hardware has to share its vectors among child devices in its PCI
domain so we should allocate as many as possible rather than just ones
that can be affinitized.

pci_alloc_irq_vectors_affinity() limits the number of affinitized IRQs to
the number of present CPUs (see irq_calc_affinity_vectors()).  But we'd
prefer to have more vectors, even if they aren't distributed across the
CPUs, so use pci_alloc_irq_vectors() instead.
Reported-by: NBrad Goodman <Bradley.Goodman@dell.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[bhelgaas: add irq_calc_affinity_vectors() reference to changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Switch from using custom INTX_NUM macro to the generic PCI_NUM_INTX definition
for the number of INTx interrupts.
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: use subject/changelog from similar patches]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

MT2712 and MT7622's PCIe host controller support MSI, but only 32-bit MSI
addresses are supported. It connects to GIC with the same IRQ number as the
INTx IRQ, so it shares the same IRQ with INTx IRQ.

Add MSI support for MT2712 and MT7622.
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: changes to follow rcar & tegra: rename to mtk_pcie_msi_alloc(),
add mtk_pcie_msi_free(), free hwirq if irq_create_mapping() fails, call
irq_dispose_mapping() from mtk_msi_teardown_irq()]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRyder Lee <ryder.lee@mediatek.com>

75983c6d1f38 ("PCI: mediatek: Add controller support for MT2712 and
MT7622") has put the mtk_pcie * into bus->sysdata.  Take advantage of that
to get the private data and simplify the code.
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRyder Lee <ryder.lee@mediatek.com>

MT2712 and MT7622 using a new IP block of Gen2 controller which has two
root ports and shares the same probing flow with MT2701/MT7623.

Both MT2712 and MT7622 have the same per-port control registers, but
there are slight differences between them:

  - MT7622 has more clocks than MT2712.

  - MT7622 has shared control registers which are used to enable LTSSM and
    ASPM while MT2712 does not.

Add host controller support for MT2712/MT7622.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
[bhelgaas: folded in fix from http://lkml.kernel.org/r/1502715868-17651-2-git-send-email-honghui.zhang@mediatek.com]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This is a transitional patch.  We currently use platfarm_get_resource() for
retrieving the IOMEM resources, but there might be some chips don't have
subsys/shared registers part, which depends on platform design, and these
will be introduced in further patches.

Switch this function to use the platform_get_resource_byname() so that the
binding can be agnostic of the resource order.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Introduce a structure "mtk_pcie_soc" to abstract the differences between
controller generations, and the .startup() hook is used to encapsulate some
SoC-dependent related setting.  In doing so, the common code which will be
reused by future chips.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Rename "port->index" to "port->slot" since the ports are hardwired at
PCI_SLOT.  Also rename "mtk_pcie_parse_ports()" to "mtk_pcie_parse_port()"
since it parses one port each time.

No functional change in this patch.
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Wait for Gen2 training with readl_poll_timeout(), and simplify the hardware
assert logical by merging it into a new mtk_pcie_startup_port() interface.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NHonghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls to
explicitly state whether the driver needs exclusive or shared reset control
behavior. Convert all drivers requesting exclusive resets to the explicit
API call so the temporary transition helpers can be removed.

No functional changes.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>

Add support for ls1088a.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMinghuan Lian <minghuan.Lian@nxp.com>

The ls2088a PCIe controller's register addresses are different from
ls2080a, so add a match entry to identify ls2088a PCIe.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMinghuan Lian <minghuan.Lian@nxp.com>

Previously we enabled writes to the DBI read-only registers so the Class
Code fix in dw_pcie_setup_rc() would work.  But now dw_pcie_setup_rc()
enables write permission itself, so we don't need to do it here.

Stop enabling writes to the DBI read-only registers.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

Now that the Class Code fixup in dw_pcie_setup_rc() works, remove the fixup
from the Layerscape driver.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

dw_pcie_setup_rc() contains fixes to update the Class Code and Interrupt
Pin registers, but the fixes don't actually work because these registers
are read-only.

Enable write permission before updating the Class Code and Interrupt
Pin.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoao Pinto <jpinto@synopsys.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

The read-only DBI registers can be written only when the "Write to RO
Registers Using DBI" (DBI_RO_WR_EN) field of MISC_CONTROL_1_OFF is set.

Add accessors to enable and disable write permission, and use them instead
of accessing MISC_CONTROL_1_OFF directly.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoao Pinto <jpinto@synopsys.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

Disable all the outbound windows to avoid one transaction hitting multiple
outbound windows.  dw_pcie_setup_rc() will reconfigure the outbound
windows, which may conflict with windows configured by the bootloader.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

ls1021_pcie_host_init() duplicated the code in the generic
ls_pcie_host_init().  Call ls_pcie_host_init() instead of duplicating the
code.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRoy Zang <tie-fei.zang@freescale.com>

Some platforms like K2G has reserved use of BAR_0 which shouldn't be
disabled by software. Avoid disabling all BARs during initialization.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

dra7xx has all base address registers (BAR) enabled by default. Reset all
BARs during initialization and so that BARs are enabled only if they are
actually used.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Use the newly introduced __pci_epc_mem_init() instead of pci_epc_mem_init()
to provide page_size to pci_epc_mem. This is in preparation for
adding EP support to K2G which has a restriction that the
address region should be either divided into 1MB/2MB/4MB or 8MB
sizes (Ref: 11.14.4.9.1 Outbound Address Translation in K2G TRM SPRUHY8F
January 2016 – Revised May 2017).
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

epf_test is allocated using devm_kzalloc(). Hence it's not required to
explicitly free it in remove() callback. Since ->remove() callback doesn't
do anything other than freeing epf_test, remove the ->remove() callback.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Certain platforms like TI's K2G doesn't support link-up notification. Add
support to poll early (without waiting for the linkup notification) for
commands from the host.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>