- Run Lindent
 - Move advansys_detect and advansys_release to the end of the file
 - Split advansys_board_found out of advansys_detect
 - Rename a few variables, such as shp to shost and pci_devp to pdev
 - Turn STATIC into static
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Wide transfers are required for every setting of PPR apart from QAS.
It seems the DV code starts at the minimum, which turns on DT and Wide
regardless of the setting of max_width.  Redo the PPR and period
setting routines to respect max_width (i.e. start at period = 10 if it
is zero).

This fixes bugzilla 8366
Acked-by: N"Freels, James D." <freelsjd@ornl.gov>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>.  Thanks again Richard.

- on following sysfs attritute function, changes have made so that both
  count and offset input parameters are honored by the functions.
    = qla2x00_sysfs_read_nvram()
    = qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
  during agent querying of the driver's.
Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Minor unimportant cuttings from the floor bundled in with a version
stamp update. Only controversial change is the dropping of Alan Cox
copyright on the nark.c module since that file has no code written by
him in it.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

It was found by LSI that on setups with large amounts of memory
we were bouncing buffers when we did not need to. If the iscsi tcp
code touches the data buffer (or a helper does),
it will kmap the buffer. iscsi_tcp also does not interact with hardware,
so it does not have any hw dma restrictions. This patch sets the bounce
buffer settings for our device queue so buffers should not be bounced
because of a driver limit.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We should not be checking the cmd windown for just handling r2t responses.
And if the window closes in on us, always have scsi-ml requeue the command
from our queuecommand function.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This prevents the iscsi modules from being unloaded while
there are active mounts from an iscsi target.
Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

When we logout we block the session since we are not taking any more
commands, but when we call remove host we want to make sure any
IO that got queued up and blocked gets failed upwards quickly, so
we unblock the session and fail it.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Eliminate unnecessary PCI dependencies in libsas.  It should use generic
DMA and struct device like other subsystems.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Apropos this thread

http://marc.theaimsgroup.com/?l=linux-scsi&m=115591706804045&w=2

which led to this patch

http://www.kernel.org/git/?p=linux/kernel/git/jejb/scsi-rc-fixes-2.6.git;a=commit;h=b2b3c121076961333977f485f0d54c22121df920

We also need to fix sym53c8xx only to bind to the PCI ID if it is of
device class PCI_CLASS_STORAGE_SCSI (otherwise it will be the cpqarray
RAID device).
Signed-off-by: NChip Coldwell <coldwell@redhat.com>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Just using #defines for the
bsg_register_queue()/bsg_unregister_queue() can cause undefined
variables when they're defined to nothing.  Use dummy inline functions
instead.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

sas_smp_handler crashes when smp utils are used with an aic94xx host
because certain devices (the sas_host itself, specifically) lack rphy
structures.  No rphy means no SMP target support, but we shouldn't crash
here.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We need to newline terminate responses from nodes within the sysfs tree,
the Adapter status value reported by the reset adapter node is adjusted.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

On the SCSI layer ioctl path there is no implicit permissions check for
ioctls (and indeed other drivers implement unprivileged ioctls). aacraid
however allows all sorts of very admin only things to be done so should
check.
Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: N"Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- kill uhdr in bsg_command structure
- it's not necessary to put SG v4 stuff to block/scsi_ioctl.c
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This replaces the current linear search for a unique minor number with
lib/idr.c.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

    - Left overs from last code merges of qla2xxx
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This avoids a conflict with sparse builds.

Reported by Alexey Dobriyan, fix suggested by Al Viro
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent 9p commit: bd238fb4 that
supposedly only moved files also introduced a new 9p sysctl interface
that did not properly register it's sysctl binary numbers.

And since it was only for debugging clearly did not need a binary fast
path in any case.  So this patch just remove the binary numbers.

See Documentation/sysctl/ctl_unnumbered.txt for more details.

While I was at it I cleaned up the sysctl initializers a little as
well so there is less to read.

Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a typo in SubmittingPatches where "probably" was spelt "probabally".
Signed-off-by: NLinus Nilsson <lajnold@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change a headline to reflect that there are three main types of kernel
locking, not two.
Signed-off-by: NLinus Nilsson <lajnold@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Support small QP queues
  IB/ehca: Make internal_create/destroy_qp() static
  IB/ehca: Move ehca2ib_return_code() out of line
  IB/ehca: Generate async event when SRQ limit reached
  IB/ehca: Support large page MRs
  IB/mlx4: Fix error path in create_qp_common()
  mlx4_core: Change command token on timeout
  IB/mthca: Change command token on timeout
  IB/ipath: Remove ipath_layer dead code
  IB/mlx4: Fix leaks in __mlx4_ib_modify_qp

Now that the last inlined instances are gone, all that is left to do
is turning disable_irq_nosync on arm26 and m68k from defines to aliases
and we are all set - we can make these externs in linux/interrupt.h
uncoditional and kill remaining instances in asm/irq.h
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...

Not everyone wants libsas automatically to pull in libata.  This patch
makes the behaviour configurable, so you can build libsas with or
without ATA support.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits)
  [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410
  [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers
  [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h
  [ARM] 4521/2: S3C: Reorganise VA mapping headers
  [ARM] 4520/1: S3C: Remove old VA values from static map
  [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h
  [ARM] 4518/1: S3C: Rename watchdog configuration options
  [ARM] 4517/1: S3C: Fix debug macros for ARM926 output
  [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926
  [ARM] 4515/1: S3C: Move uncompress code to plat-s3c
  [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
  [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
  [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates
  [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
  [ARM] 4510/1: S3C: split debug-macro support into plat-s3c
  [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
  [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
  [ARM] 4461/1: MXC platform and i.MX31ADS core support
  [ARM] 4507/1: pxa2xx clock_event_device
  [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Convert from struct class_device to struct device
  leds: leds-gpio for ngw100
  leds: Add warning printks in error paths
  leds: Fix trigger unregister_simple if register_simple fails
  leds: Use menuconfig objects II - LED
  leds: Teach leds-gpio to handle timer-unsafe GPIOs
  leds: Add generic GPIO LED driver

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  leds: cr_bllcd.c: build fix
  backlight: Convert from struct class_device to struct device
  backlight: Fix order of Kconfig entries

* 'audit.b39' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] get rid of AVC_PATH postponed treatment
  [PATCH] allow audit filtering on bit & operations
  [PATCH] audit: fix broken class-based syscall audit
  [PATCH] Make IPC mode consistent

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Clean up duplicate includes in drivers/macintosh/
  [POWERPC] Quiet section mismatch warning on pcibios_setup
  [POWERPC] init and exit markings for hvc_iseries
  [POWERPC] Quiet section mismatch in hvc_rtas.c
  [POWERPC] Constify of_platform_driver match_table
  [POWERPC] hvcs: Make some things static and const
  [POWERPC] Constify of_platform_driver name
  [POWERPC] MPIC protected sources
  [POWERPC] of_detach_node()'s device node argument cannot be const
  [POWERPC] Fix ARCH=ppc builds
  [POWERPC] mv64x60: Use mutex instead of semaphore
  [POWERPC] Allow smp_call_function_single() to current cpu
  [POWERPC] Allow exec faults on readable areas on classic 32-bit PowerPC
  [POWERPC] Fix future firmware feature fixups function failure
  [POWERPC] fix showing xmon help
  [POWERPC] Make xmon_write accept a const buffer
  [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option.
  [POWERPC] cell: CONFIG_SPE_BASE is a typo

Fix

WARNING: vmlinux.o(.data+0x99): Section mismatch: reference to .init.text:xen_start_kernel (between 'startup_xen' and 'boot_gdt_descr')
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Obviously broken on little-endian; fortunately, the option is not
frequently used...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
[ Hey, sparse is wonderful, but even better than sparse is having people
  like Al that actually _run_ it and fix bugs using it.    - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Found by Sebastian Siewior and randconfig.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (77 commits)
  ACPI: Populate /sys/firmware/acpi/tables/
  ACPI: create CONFIG_ACPI_DEBUG_FUNC_TRACE
  ACPI: update ACPI proc I/F removal schedule
  ACPI: update feature-removal-schedule.txt, /sys/firmware/acpi/namespace is gone
  ACPI: export ACPI events via acpi_mc_group multicast group
  ACPI: fix empty macros found by -Wextra
  ACPI: drivers/acpi/pci_link.c: lower printk severity
  sony-laptop: Fix event reading in sony-laptop
  sony-laptop: Add Vaio FE to the special init sequence
  sony-laptop: Make the driver use MSC_SCAN and a setkeycode and getkeycode key table.
  sony-laptop: Invoke _INI for SNC devices that provide it
  sony-laptop: Add support for recent Vaios Fn keys (C series for now)
  sony-laptop: map wireless switch events to KEY_WLAN
  sony-laptop: add new SNC handlers
  ACPI: thinkpad-acpi: add locking to brightness subdriver
  ACPI: thinkpad-acpi: bump up version to 0.15
  ACPI: thinkpad-acpi: make EC-based thermal readings non-experimental
  ACPI: thinkpad-acpi: make sure DSDT TMPx readings don't return +128
  ACPI: thinkpad-acpi: react to Lenovo ThinkPad differences in hot key
  ACPI: thinkpad-acpi: allow use of CMOS NVRAM for brightness control
  ...

They are identical

Indirectly pointed out by Thomas Gleixner
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

64bit code in there now since some time.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Get rid of warnings like

WARNING: vmlinux.o(.bootstrap.text+0x1a8): Section mismatch: reference to .init.text:x86_64_start_kernel (between 'initial_code' and 'init_rsp')

- Move initialization code into .text.head like i386 because modpost knows about this already
- Mark initial_code .initdata
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>