- 18 8月, 2013 1 次提交
-
-
由 Ondrej Zary 提交于
Move tea575x from sound/i2c/other to drivers/media/radio Includes Kconfig changes by Hans Verkuil. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 21 5月, 2013 1 次提交
-
-
由 Arnd Bergmann 提交于
It is not possible to select SND_SOC_SI476X if we have not also enabled SND_SOC. warning: (RADIO_SI476X) selects SND_SOC_SI476X which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Signed-off-by: NArnd Bergmann <arnd@arndb.de> [hans.verkuil@cisco.com: fixed wrong driver name in subject] Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 4月, 2013 1 次提交
-
-
由 Andrey Smirnov 提交于
This commit adds a driver that exposes all the radio related functionality of the Si476x series of chips via the V4L2 subsystem. [mchehab@redhat.com: change it to depends on MFD_SI476X_CORE instead of selecting it; vidioc_s_register now uses const struct] Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 4月, 2013 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As requested by Andrey Smirnov <andrew.smirnov@gmail.com>, revert this patch. This reverts commit 30bac911. Conflicts: drivers/media/radio/Kconfig drivers/media/radio/radio-si476x.c Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 3月, 2013 1 次提交
-
-
由 Hans Verkuil 提交于
radio-si476x depends on SND and SND_SOC, the mfd driver should select REGMAP_I2C. Also fix a small compile warning in a debug message: drivers/mfd/si476x-i2c.c: In function ‘si476x_core_drain_rds_fifo’: drivers/mfd/si476x-i2c.c:391:4: warning: field width specifier ‘*’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat] Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 3月, 2013 1 次提交
-
-
由 Andrey Smirnov 提交于
This commit adds a driver that exposes all the radio related functionality of the Si476x series of chips via the V4L2 subsystem. Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 2月, 2013 1 次提交
-
-
由 Heiko Carstens 提交于
Texas Instruments WL1273 I2C FM Radio (RADIO_WL1273) selects MFD_CORE, which itself depends on GENERIC_HARDIRQS. So add the dependency to the TI driver as well. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 28 12月, 2012 1 次提交
-
-
由 Alexey Klimov 提交于
This patch creates a new usb-radio driver, radio-ma901.c, that supports Masterkit MA 901 USB FM radio devices. This device plugs into both the USB and an analog audio input or headphones, so this thing only deals with initialization and frequency setting. Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 7月, 2012 2 次提交
-
-
由 Hans de Goede 提交于
This driver consists of 2 parts, a generic tea5777 driver and a driver for the Griffin radioSHARK v2 USB radio receiver, which is the only driver using the generic tea5777 for now. This first version only implements FM support, once the the new VIDIOC_ENUM_FREQ_BANDS API is upstream I'll also add AM support. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 7月, 2012 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
After this patch, the MEDIA*_SUPPORT will be used as a filter, exposing only devices that are pertinent to one of the 3 V4L types: webcam/grabber, radio, analog TV. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 6月, 2012 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This reverts commit 4ecbb694. As requested by Hans Verkuil: > You accidentally merged the wrong first version of the lm7000 patch series. > > These are the correct second version patches: > > http://patchwork.linuxtv.org/patch/11689/ > http://patchwork.linuxtv.org/patch/11690/ > http://patchwork.linuxtv.org/patch/11691/ > > The second version is much simpler and doesn't require the creation of a whole > new driver. Requested-by: NHans Verkuil <hverkuil@xs4all.nl> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This reverts commit bece083a. As requested by Hans Verkuil: > You accidentally merged the wrong first version of the lm7000 patch series. > > These are the correct second version patches: > > http://patchwork.linuxtv.org/patch/11689/ > http://patchwork.linuxtv.org/patch/11690/ > http://patchwork.linuxtv.org/patch/11691/ > > The second version is much simpler and doesn't require the creation of a whole > new driver. Requested-by: NHans Verkuil <hverkuil@xs4all.nl> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This reverts commit 1e70a6cf. As requested by Hans Verkuil: > You accidentally merged the wrong first version of the lm7000 patch series. > > These are the correct second version patches: > > http://patchwork.linuxtv.org/patch/11689/ > http://patchwork.linuxtv.org/patch/11690/ > http://patchwork.linuxtv.org/patch/11691/ > > The second version is much simpler and doesn't require the creation of a whole > new driver. Requested-by: NHans Verkuil <hverkuil@xs4all.nl> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 21 6月, 2012 3 次提交
-
-
由 Ondrej Zary 提交于
Convert radio-sf16fmi to use generic LM7000 driver. Tested with SF16-FMI, SF16-FMP and SF16-FMD. radio."); @@ -48,37 +50,40 @@ struct fmi bool mute; unsigned long curfreq; /* freq in kHz */ struct mutex lock; + struct lm7000 lm; }; static struct fmi fmi_card; static struct pnp_dev *dev; bool pnp_attached; -/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */ -/* It is only useful to give freq in interval of 800 (=0.05Mhz), - * other bits will be truncated, e.g 92.7400016 -> 92.7, but - * 92.7400017 -> 92.75 - */ -#define RSF16_ENCODE(x) ((x) / 800 + 214) #define RSF16_MINFREQ (87 * 16000) #define RSF16_MAXFREQ (108 * 16000) -static void outbits(int bits, unsigned int data, int io) +#define FMI_BIT_TUN_CE (1 << 0) +#define FMI_BIT_TUN_CLK (1 << 1) +#define FMI_BIT_TUN_DATA (1 << 2) +#define FMI_BIT_VOL_SW (1 << 3) +#define FMI_BIT_TUN_STRQ (1 << 4) + +void fmi_set_pins(struct lm7000 *lm, u8 pins) { - while (bits--) { - if (data & 1) { - outb(5, io); - udelay(6); - outb(7, io); - udelay(6); - } else { - outb(1, io); - udelay(6); - outb(3, io); - udelay(6); - } - data >>= 1; - } Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Ondrej Zary 提交于
Convert radio-aimslab to use generic LM7000 driver. Tested with Reveal RA300. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Ondrej Zary 提交于
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported as there is no known HW with AM implemented. This will be used by radio-aimslab and radio-sf16fmi. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 21 5月, 2012 2 次提交
-
-
由 Ondrej Zary 提交于
Add support for SF16-FMD card to radio-sf16fmi driver. Only new PnP ID is added and texts changed. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Ondrej Zary 提交于
Add PnP support to radio-sf16fmr2 driver to support SF16-FMD2 card (SB16 + TEA5757). The driver can now handle two cards (FMR2 is hardwired to 0x384, FMD2 can be put at 0x384 or 0x284 by PnP). Tested with both SF16-FMR2 and SF16-FMD2 (the can work at the same time by using kernel parameter "pnp_reserve_io=0x384,2" so the FMD2 is put at 0x284). Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 3月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
This card is based on the tea575x receiver. Use the tea575x-tuner framework instead of reinventing the wheel. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 15 2月, 2012 11 次提交
-
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with v4l2-compliance, but not with actual hardware. Contact the linux-media mailinglist if you have this card! Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with actual hardware (up to two cards) and the Keene USB FM Transmitter. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with actual hardware and the Keene USB FM Transmitter. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Tested with actual hardware and the Keene USB FM Transmitter. Improved the volume handling delays through trial and error. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
We have quite a few ISA radio drivers, which are all very similar. This framework makes it possible to reduce the code size of those drivers and makes it much easier to keep them up to date with the latest V4L2 API developments. Drivers rewritten to use this framework fully pass the v4l2-compliance tests and are properly using the ISA bus (so they can be found under /sys/bus/isa). It is now also possible to support multiple cards using the same driver (tested with two radio-gemtek cards). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 11月, 2011 1 次提交
-
-
由 Hans Verkuil 提交于
Move all USB radio devices to the top of the list and move all ISA devices to a separate menu. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 24 10月, 2011 1 次提交
-
-
由 Arnd Bergmann 提交于
We currently have two symbols to control compilation the MFD subsystem, MFD_SUPPORT and MFD_CORE. The MFD_SUPPORT is actually not required at all, it only hides the submenu when not set, with the effect that Kconfig warns about missing dependencies when another driver selects an MFD driver while MFD_SUPPORT is disabled. Turning the MFD submenu back from menuconfig into a plain menu simplifies the Kconfig syntax for those kinds of users and avoids the surprise when the menu suddenly appears because another driver was enabled that selects this symbol. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 14 7月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
When CONFIG_SND is not enabled, radio-sf16fmr2 build fails with: so make this driver depend on SND. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 13 7月, 2011 1 次提交
-
-
由 Ralf Baechle 提交于
sound/isa/es18xx.c: In function ‘snd_es18xx_playback1_prepare’: sound/isa/es18xx.c:501:9: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/es18xx.c: In function ‘snd_es18xx_playback_pointer’: sound/isa/es18xx.c:818:3: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [sound/isa/es18xx.o] Error 1 sound/isa/sscape.c: In function ‘upload_dma_data’: sound/isa/sscape.c:481:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [sound/isa/sscape.o] Error 1 sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_prepare’: sound/isa/ad1816a/ad1816a_lib.c:244:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_pointer’: sound/isa/ad1816a/ad1816a_lib.c:302:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_free’: sound/isa/ad1816a/ad1816a_lib.c:544:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/ad1816a/ad1816a_lib.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/ad1816a] Error 2 sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_prepare’: sound/isa/es1688/es1688_lib.c:417:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_pointer’: sound/isa/es1688/es1688_lib.c:509:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/es1688/es1688_lib.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/es1688] Error 2 sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_program’: sound/isa/gus/gus_dma.c:79:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_done’: sound/isa/gus/gus_dma.c:177:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/gus/gus_dma.o] Error 1 sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_prepare’: sound/isa/gus/gus_pcm.c:591:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_pointer’: sound/isa/gus/gus_pcm.c:619:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/gus/gus_pcm.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/gus] Error 2 sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_ioctl’: sound/isa/sb/sb16_csp.c:228:227: error: case label does not reduce to an integer constant make[3]: *** [sound/isa/sb/sb16_csp.o] Error 1 sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_prepare’: sound/isa/sb/sb16_main.c:276:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_pointer’: sound/isa/sb/sb16_main.c:456:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/sb/sb16_main.o] Error 1 sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_prepare’: sound/isa/sb/sb8_main.c:172:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_pointer’: sound/isa/sb/sb8_main.c:425:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/sb/sb8_main.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/sb] Error 2 sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_prepare’: sound/isa/wss/wss_lib.c:1025:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_pointer’: sound/isa/wss/wss_lib.c:1160:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] sound/isa/wss/wss_lib.c: In function ‘snd_wss_free’: sound/isa/wss/wss_lib.c:1695:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/wss/wss_lib.o] Error 1 warning: (RADIO_MIROPCM20) selects SND_ISA which has unmet direct dependencies (SOUND && !M68K && SND && ISA && ISA_DMA_API) A build with ISA && ISA_DMA && !ISA_DMA_API results in: CC sound/isa/es18xx.o CC sound/isa/sscape.o CC sound/isa/ad1816a/ad1816a_lib.o CC sound/isa/es1688/es1688_lib.o CC sound/isa/gus/gus_dma.o CC sound/isa/gus/gus_pcm.o CC sound/isa/sb/sb16_csp.o CC sound/isa/sb/sb16_main.o CC sound/isa/sb/sb8_main.o CC sound/isa/wss/wss_lib.o The root cause for this is hidden in this Kconfig warning: Adding a dependency on ISA_DMA_API to RADIO_MIROPCM20 fixes these issues. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 3月, 2011 1 次提交
-
-
由 Ondrej Zary 提交于
Remove broken radio-maestro driver as the radio functionality is now integrated in the es1968 driver. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2011 2 次提交
-
-
由 Randy Dunlap 提交于
RADIO_WL1273 needs to make sure that the mfd core is built to avoid build errors: ERROR: "mfd_add_devices" [drivers/mfd/wl1273-core.ko] undefined! ERROR: "mfd_remove_devices" [drivers/mfd/wl1273-core.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Manjunatha Halli 提交于
Signed-off-by: NManjunatha Halli <manjunatha_halli@ti.com> Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 1月, 2011 1 次提交
-
-
由 Hans Verkuil 提交于
The radio-gemtek-pci driver is for the same hardware as the radio-maxiradio driver which uses the same GemTek PR103 and tea5757 combination and the two drivers are identical. I chose the maxiradio over the gemtek-pci driver since the maxiradio has support for mono/stereo detection. Tested with my gemtek-pci card. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 12月, 2010 1 次提交
-
-
由 Matti Aaltonen 提交于
This module implements V4L2 controls for the Texas Instruments WL1273 FM Radio and handles the communication with the chip. Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-