- 08 7月, 2014 7 次提交
-
-
由 Ondrej Zary 提交于
Reduce the autonegotiation poll interval from 8 seconds to 2. This greatly reduces the time needed to detect link presence, especially on Olicom cards at 10 Mbps (two autonegoatiations required). Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
Remove excess printks when the link is down. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
When link is lost on a card which uses internal PHY for 10 Mbit speeds, restart autonegotiation to allow switching between 10 and 100 Mbps speeds. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
Olicom OC-2325 and OC-2326 cards have the MAC address byte-swapped in EEPROM. Byte-swap the MAC address if it's located at offset 0xF8. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
Add basic ethtool support to tlan driver: - driver info - link detect (this allows NetworkManager to detect carrier) - EEPROM read Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
Enable old link monitoring code and modify it: - control LINK LED - use separate timer so it does not interfere with ACT LED Tested with Olicom OC-2326. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ondrej Zary 提交于
Olicom OC-2325 and OC-2326 ethernet cards have an activity LED but it does not work with tlan driver as it's not enabled. Enable it. Tested with OC-2326. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2013 1 次提交
-
-
由 Jingoo Han 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2013 1 次提交
-
-
由 Yijing Wang 提交于
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2013 1 次提交
-
-
由 Rolf Eike Beer 提交于
These 2 places are the only matches for is_eisa in the whole tree. Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2013 1 次提交
-
-
由 Devendra Naga 提交于
the work has been scheduled from interrupt, and not been cancelled when the driver is unloaded, which doesn't remove the work item from the global workqueue. call the cancel_work_sync when the driver is removed (rmmod'ed). Cc: Sriram <srk@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Vinay Hegde <vinay.hegde@ti.com> Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2012 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Samuel Chessman <chessman@tux.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 4月, 2012 1 次提交
-
-
由 Benjamin Poirier 提交于
Changes this beauty into a statement that actually has an effect on amd64. Tested-by: NPer Jessen <per@opensuse.org> Signed-off-by: NBenjamin Poirier <bpoirier@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling typo within drivers/net. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2012 1 次提交
-
-
由 Joe Perches 提交于
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram <srk@ti.com> CC: Vinay Hegde <vinay.hegde@ti.com> CC: Cyril Chemparathy <cyril@ti.com> CC: Samuel Chessman <chessman@tux.org> CC: <torben.mathiasen@compaq.com> CC: Eugene Konev <ejka@imfi.kspu.ru> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2011 2 次提交
-
-
由 Joe Perches 提交于
Neatening and standardization to the current logging mechanisms. Miscellaneous speen/speed typo correction. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
As it isn't necessary nor really useful any longer. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2011 1 次提交
-
-
由 Sakari Ailus 提交于
Fix two bugs introduced by the commit c659c38b ("tlan: Code cleanup: checkpatch.pl is relatively happy now.") In that change, TLAN_CSTAT_READY was considered as a bit mask containing a single bit set while it was actually had two set instead. Many thanks to Dan Carpenter for finding the mistake. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2011 2 次提交
-
-
由 Sakari Ailus 提交于
Add suspend/resume support to tlan driver. This allows not unloading the driver over suspend/resume. Also, start (or now, wake) the queue after resetting the adapter --- not the other way around. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sakari Ailus 提交于
- Remove CamelCase. - Convert hexadecimals to lower case. - Remove useless comments. Tlan driver contained a name of the function at the end of it in a comment. Remove those comments. - Remove local typedefs. Use real types instead of typedefs in code. - Resolve space issues and reindent. - One warning remain, it's a case where printing a single line involves a number of printk()s. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 1 次提交
-
-
由 Joe Perches 提交于
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2010 1 次提交
-
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2009 1 次提交
-
-
由 Patrick McHardy 提交于
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-