Former comment looks to be one intended behavior in code,
actually it's not. So correct it.
Suggested-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SMU12 not support WORKLOAD_DEFAULT_BIT and WORKLOAD_PPLIB_POWER_SAVING_BIT.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To pair the latest SMU firmwares.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Programming DPPCLK to the same value currently set may cause
underflow while playing video in certain conditions.

[HOW]
Only program DPPCLK if clock is not the same as the
previous value programmed.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In the case where we do have these passed in then we should be using
these instead of the registers - those are only programmed when booting
the adapter as primary.

[How]
Check if fb_base/fb_offset are non-zero. The value of 0 is invalid
for fb_base but is valid for fb_offset on dGPU.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Driver needs to know PSR state.

[How]
Use GPINT to call to firmware and get psr state.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In DCN hardware sequencer we do actually call ATOM_INIT correctly per
pipe. The workaround is not necessary for command table offloading.

[How]
Drop the workaround since it's not needed.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
customer issue: found that for their specific panel, EDID register space
being overwritten during SCDC read write

[how]
customer accepted HDMI 2 features not working - disabled SCDC read/write
as well as HDMI 2 in general based on monitor patch
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently odm scaling calculations are only done when adding initial
odm pipe. Any scaling re-calculations will mess up odm because of this.

This change resolves the problem by updating scaling split logic to
handle odm.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NMichael Strauss <Michael.Strauss@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the struct dc_panel_patch, we have a field named
manage_secondary_link which is not used by any part of the code. This
commit drops the unused field.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some register defines are redundant or updated

[How]
Update register defines
Remove some redundant defines
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NWyatt Wood <Wyatt.Wood@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NSun peng Li <Sunpeng.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
in dcn10_apply_ctx_for_surface(), if we hit !top_pipe_to_program,
pipe_ctx->update_flags could not get cleared.

[How]
Moved clearing pipe_ctx->update_flags logic before if
(!top_pipe_to_program) to gurantee pipe_ctx->update_flags get cleared.
Signed-off-by: NPeikang Zhang <peikang.zhang@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Several modern displays support HDR/OLED panel, and one of the
interesting changes provided by this technology is the new approach for
handling backlight. More precisely, in the traditional way, we use PWM
to manage display backlight; however, with HDR/OLED we begin to use DP
Aux channel for adjusting the backlight.

This patch, enable the backlight control in HDR/OLED display via DP Aux.
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce vendor-specific registers for handling backlight via AUX.
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Set version is currently not called.

[How]
Add call to set version from copy settings. This
should be the only time this is called as the eDP
caps should never change.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Vendor dongle requires propietary OUI and handshake sequence.

[HOW]
Add a new structure to dc_init_data, to allow creator to pass
an override vendor_oui. This value will be written to DP_SOURCE_OUI
instead of AMD signature, when dpcd_set_source_specific_data is
called.
Signed-off-by: NCalvin Hou <Calvin.Hou@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Taking up unnecessary space.

[How]
Remove unused values from psr struct.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
With the fallback case in place for command table offloading via DMCUB
it's no longer an error for the command table to be missing specific
entries.

[How]
Drop the BREAK_TO_DEBUGGER();
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
before we exit early in edp_reciever_ready if we detect that panel
is not edp or below rev 1.2. This will skip the backlight/t7 delay panel
patch.

[how]
edit logic to ensure panel patch is applied regardless of edp rev.
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix warning during switching to dpg pause mode for
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Acked-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GDS clear workaround will cause gfx failure in suspend/resume case.

[   98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110
[   98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110
[   98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110

As this workaround is specific to the HW bug of GDS's ECC error
existing in cold boot up, so bypass this workaround in suspend/
resume case after booting up.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the recent patch to unify VRAM address for driver
table(a83f82e). VF cannot dump table info any more because
SMU_MSG_SetDriverDramAddrHigh/Low were deleted in the
function of smu_update_table.

Therefore, VF also needs to set driver_table address
in smu_hw_init to fix this regression issue.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make use of the better performance here as well.

This patch is only compile tested!

v2: fix calculation bug pointed out by Felix
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This speeds up the access quite a bit from 2.2 MB/s to
2.9 MB/s on 32bit and 12,8 MB/s on 64bit.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This should speed up debugging VRAM access a lot.

v2: add HDP flush/invalidate
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only write the _HI register when necessary.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

hwc->conf was designated specifically for AMD APU IOMMU purposes.  This
could cause problems in performance and/or function since APU IOMMU
implementation is elsewhere.  Also hwc->conf and hwc->config are
different members of an anonymous union so hwc->conf aliases as
hw->last_tag.
Signed-off-by: NJonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On PowerPC, the compiler will tag object files with whether they
use hard or soft float FP ABI and whether they use 64 or 128-bit
long double ABI. On systems with 64-bit long double ABI, a tag
will get emitted whenever a double is used, as on those systems
a long double is the same as a double. This will prevent linkage
as other files are being compiled with hard-float.

On ppc64, this code will never actually get used for the time
being, as the only currently existing hardware using it are the
Renoir APUs. Therefore, until this is testable and can be fixed
properly, at least make sure the build will not fail.
Signed-off-by: NDaniel Kolesa <daniel@octaforge.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode
power off issue on instance 1.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SMU FW will handle the features disablement for baco reset
on Arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For sriov and pp_onevf_mode, do not send message to set smu
status, because smu doesn't support these messages under VF.

Besides, it should skip smu_suspend when pp_onevf_mode is disabled.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently, gcc spews a warning as:
  drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hubbub.c: In function ‘hubbub1_verify_allow_pstate_change_high’:
  ./include/drm/drm_print.h:316:2: warning: ‘debug_data’ may be used uninitialized in this function [-Wmaybe-uninitialized]

This is because the code checks against a static value although it's
basically a constant and guaranteed to be set.

This patch changes the type prefix from static to const for addressing
the compile warning above and also for letting the compiler optimize
better.

Fixes: 62d591a8 ("drm/amd/display: create new files for hubbub functions")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Provide compute queues information in sysfs under /sys/class/kfd/kfd/proc.
The format is /sys/class/kfd/kfd/proc/<pid>/queues/<queue id>/XX where
XX are size, type, and gpuid three files to represent queue size, queue
type, and the GPU this queue uses. <queue id> folder and files underneath
are generated when a queue is created. They are removed when the queue is
destroyed.
Signed-off-by: NAmber Lin <Amber.Lin@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
not turning off the mst hub before detection on reboot
causes us to not be able to light up displays with mst hook

[how]
on hw init, see if any displays are lit up. if so, turn them off
Signed-off-by: NJoseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Starting from 14nm, the PLL is built into the PHY and the PLL is mapped
to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not
initialized. This causes DP to HDMI dongle to not light up the display.

[How]
Initializations added for PLL2 when creating resources.
Signed-off-by: NIsabel Zhang <isabel.zhang@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
these registers should have been double buffered. SW workaround we will have SW program the more aggressive (lower) values
whenever we are upating this register, so we will not have underflow at expense of less optimzal request pattern.

[How]
there is a driver bug where we don't check for 0, which is uninitialzed HW default.  since 0 is smaller than any value we need to program,
driver end up with not programming these registers
Signed-off-by: NTony Cheng <tony.cheng@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why] old panel has been enabled for window driver but not linux.

[How] enable oled panel support for linux. this patch is dc part.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Resume from modern standby, edp stream disabled
but abm keep enabled. External monitor select OTG
source 0 which ABM enabled.
[how]
Disable abm before disable crtc when reset path
mode not call core link disable stream.
Signed-off-by: NJing Zhou <Jing.Zhou@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The DMUB tracebuffer is useful for understanding DMCUB execution state.

[How]
Add a "show" attribute debugfs so we can loop through the buffer
and print the entries.

The structs for the entry format are defined in the debugfs since
the tracebuffer header no longer exists in the DMUB service.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>