- 16 9月, 2009 15 次提交
-
-
由 Greg Ungerer 提交于
The ColdFire 532x family of parts uses 2 of the same INTC interrupt controlers used in the ColdFire 520x family. So modify the code to support both parts. The extra code for the second INTC controler in the case of the 520x is easily optimized away to nothing. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
With the common intc-2 interrupt controller code in place the ColdFire 523x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
With the common intc-2 interrupt controller code in place the ColdFire 528x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
With the common intc-2 interrupt controller code in place the ColdFire 527x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Create general interrupt controller code for the many ColdFire version 2 cores that use the two region INTC interrupt controller. This includes the 523x family, 5270, 5271, 5274, 5275, and the 528x families. This code does proper masking and unmasking of interrupts. With this in place some of the driver hacks in place to support ColdFire interrupts can finally go away. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
With general interrupt controller code in place we don't need specific unmasking code for the internal ColdFire 520x UARTs or ethernet (FEC). Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Create general interrupt controller code for the ColdFire 520x family, that does proper masking and unmasking of interrupts. With this in place some of the driver hacks in place to support ColdFire interrupts can finally go away. Within the ColdFire family there is a variety of different interrupt controllers in use. Some are used on multiple parts, some on only one. There is quite some differences in some varients, so much so that common code for all ColdFire parts would be impossible. This commit introduces code to support one of the newer interrupt controllers in the ColdFire 5208 and 5207 parts. It has very simple mask and unmask operations, so is one of the easiest to support. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Change C99 style comments to traditional K&R style. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The non-mmu version of dma.h contains a lot of ColdFire specific DMA support, but also all of the base m68k support. So use the non-mmu version of dma.h for all. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The mmu and non-mmu versions of checksum.h are mostly the same, merge them. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
It is reasonably strait forward to merge the mmu and non-mmu versions of irq.h. Most of the defines and structs are not needed on non-mmu. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
The mmu and non-mmu versions of processor.h have a lot of common code. This is a strait forward merge. start_thread() could be improved, but that is not quite as strait forward, leaving for a follow on change. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Greg Ungerer 提交于
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 10 9月, 2009 14 次提交
-
-
由 sfking@fdwdc.com 提交于
The definition of MCFSIM_PADDR and MCFSIM_PADAT now has MCF_BAR already added in. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5407. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 532x. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5307. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 528x. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5272. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5271 & 5275. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5249. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 523x. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 520x. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5206e. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
Add support for the 5206. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 sfking@fdwdc.com 提交于
This adds the basic infrastructure used by all of the different Coldfire CPUs. Signed-off-by: NSteven King <sfking@fdwdc.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Linus Torvalds 提交于
-
- 09 9月, 2009 3 次提交
-
-
由 Ed Cashin 提交于
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: NEd Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Linus Torvalds 提交于
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhenyu Wang 提交于
eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: NCarlos R. Mafra <crmafra2@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 9月, 2009 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: IMA: update ima_counts_put
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: pcmcia: add CNF-CDROM-ID for ide
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: agp/intel: support for new chip variant of IGDNG mobile drm/i915: Unref old_obj on get_fence_reg() error path drm/i915: increase default latency constant (v2 w/comment)
-
- 07 9月, 2009 2 次提交
-
-
由 Dave Airlie 提交于
This adds some rv350+ register for LTE/GTE discard, and enables the rv515 two sided stencil register. It also disables the DEPTHXY_OFFSET register which can be used to workaround the CS checker. Moves rs690 to proper place in rs600 and uses correct table on rs600. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Mimi Zohar 提交于
- As ima_counts_put() may be called after the inode has been freed, verify that the inode is not NULL, before dereferencing it. - Maintain the IMA file counters in may_open() properly, decrementing any counter increments on subsequent errors. Reported-by: NCiprian Docan <docan@eden.rutgers.edu> Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 06 9月, 2009 1 次提交
-
-
由 David S. Miller 提交于
Reported by Michael Guntsche <mike@it-loops.com> -------------------- Commit 38bddf04 gianfar: gfar_remove needs to call unregister_netdev() breaks the build of the gianfar driver because "dev" is undefined in this function. To quickly test rc9 I changed this to priv->ndev but I do not know if this is the correct one. -------------------- Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-