- 03 5月, 2007 40 次提交
-
-
由 Vivek Goyal 提交于
o Various cleanups. One of the main purpose of cleanups is that make wakeup.S as close as possible to trampoline.S. o Following are the changes - Indentations for comments. - Changed the gdt table to compact form and to resemble the one in trampoline.S - Take the jump to 32bit from real mode using ljmpl. Makes code more readable. - After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode" - Stack is not used after real mode. So don't load stack in 32 bit mode. - No need to enable PGE here. - No need to do extra EFER read, anyway we trash the read contents. - No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored. - No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
o Use appropriate names for 64bit regsiters. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
o Get rid of dead code in wakeup.S o We never restore from saved_gdt, saved_idt, saved_ltd, saved_tss, saved_cr3, saved_cr4, saved_cr0, real_save_gdt, saved_efer, saved_efer2. Get rid of of associated code. o Get rid of bogus_magic, bogus_31_magic and bogus_magic2. No longer being used. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
This modifies the SMP trampoline and all of the associated code so it can jump to a 64bit kernel loaded at an arbitrary address. The dependencies on having an idenetity mapped page in the kernel page tables for SMP bootup have all been removed. In addition the trampoline has been modified to verify that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
EFER varies like %cr4 depending on the cpu capabilities, and which cpu capabilities we want to make use of. So save/restore it make certain we have the same EFER value when we are done. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Move __KERNEL32_CS up into the unused gdt entry. __KERNEL32_CS is used when entering the kernel so putting it first is useful when trying to keep boot gdt sizes to a minimum. Set the accessed bit on all gdt entries. We don't care so there is no need for the cpu to burn the extra cycles, and it potentially allows the pages to be immutable. Plus it is confusing when debugging and your gdt entries mysteriously change. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Use virtual addresses instead of physical addresses in copy bootdata. In addition fix the implementation of the old bootloader convention. Everything is at real_mode_data always. It is just that sometimes real_mode_data was relocated by setup.S to not sit at 0x90000. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
- Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run. - As physmem_pgt is gone don't export it in pgtable.h. - Use defines from pgtable.h for page permissions. - Fix the physical memory identity mapping so it is at the correct address. - Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it. - Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Early in the boot process we need the ability to set up temporary mappings, before our normal mechanisms are initialized. Currently this is used to map pages that are part of the page tables we are building and pages during the dmi scan. The core problem is that we are using the user portion of the page tables to implement this. Which means that while this mechanism is active we cannot catch NULL pointer dereferences and we deviate from the normal ways of handling things. In this patch I modify early_ioremap to map pages into the kernel portion of address space, roughly where we will later put modules, and I make the discovery of which addresses we can use dynamic which removes all kinds of static limits and remove the dependencies on implementation details between different parts of the code. Now alloc_low_page() and unmap_low_page() use early_iomap() and early_iounmap() to allocate/map and unmap a page. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
This patch makes pgtable.h and page.h safe to include in assembly files like head.S. Allowing us to use symbolic constants instead of hard coded numbers when refering to the page tables. This patch copies asm-sparc64/const.h to asm-x86_64 to get a definition of _AC() a very convinient macro that allows us to force the type when we are compiling the code in C and to drop all of the type information when we are using the constant in assembly. Previously this was done with multiple definition of the same constant. const.h was modified slightly so that it works when given CONFIG options as arguments. This patch adds #ifndef __ASSEMBLY__ ... #endif and _AC(1,UL) where appropriate so the assembler won't choke on the header files. Otherwise nothing should have changed. AK: added const.h to exported headers to fix headers_check Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Stephen Hemminger 提交于
The dma_ops structure can be const since it never changes after boot. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
smp_call_function and smp_call_function_single are almost complete duplicates of the same logic. This patch combines them by implementing them in terms of the more general smp_call_function_mask(). Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Stephane Eranian <eranian@hpl.hp.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Andi Kleen <ak@suse.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Joerg Roedel 提交于
This patch fixes the reporting of cpu_mhz in /proc/cpuinfo on CPUs with a constant TSC rate and a kernel with disabled cpufreq. Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> arch/x86_64/kernel/apic.c | 2 - arch/x86_64/kernel/time.c | 58 +++++++++++++++++++++++++++++++++++++++--- arch/x86_64/kernel/tsc.c | 12 +++++--- arch/x86_64/kernel/tsc_sync.c | 2 - include/asm-x86_64/proto.h | 1 5 files changed, 65 insertions(+), 10 deletions(-)
-
On Tue, Mar 13, 2007 at 05:33:09AM -0700, Randy.Dunlap wrote: > On Tue, 13 Mar 2007, Glauber de Oliveira Costa wrote: > > > Tiny cleanup: > > > > In x86_64, the same functions for reading cr3 and writing cr{3,4} are > > defined in tlbflush.h and system.h, whith just a name change. > > The only difference is the clobbering of memory, which seems a safe, and > > even needed change for the write_cr4. This patch removes the duplicate. > > write_cr3() is moved to system.h for consistency. > > missing patch..... > thanks. Attached now -- Glauber de Oliveira Costa Red Hat Inc. "Free as in Freedom" Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Rusty Russell 提交于
The set_seg_base function isn't used anywhere (2.6.21-rc3-git1) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Lasse Collin 提交于
Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
The reboot_fixups stuff seems to be a bit of a mess, specifically the header is in linux/ when its a purely i386-specific piece of code. I'm not sure why it has its config option; its only currently needed for "geode-gx1/cs5530a", so perhaps whatever config option controls that hardware should enable this? Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Aneesh Kumar K.V 提交于
Explicity specify that the caller should pin the user memory otherwise the function will sleep Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
The kernel only supports gcc 3.2+ now so it doesn't make sense anymore to explicitely check for options this compiler version already has. This actually fixes a bug. The -mprefered-stack-boundary check never worked because gcc rightly complains CC arch/i386/kernel/asm-offsets.s cc1: -mpreferred-stack-boundary=2 is not between 4 and 12 We just never saw the error because of cc-options. I changed it to 4 to actually work. Tested by compiling i386 and x86-64 defconfig with gcc 3.2. Should speed up the build time a tiny bit and improve stack usage on i386 slightly. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Pointed out by Adrian Bunk Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Prarit Bhargava 提交于
Change sysenter_setup to __cpuinit. Change __INIT & __INITDATA to be cpu hotplug aware. Resolve MODPOST warnings similar to: WARNING: vmlinux - Section mismatch: reference to .init.text:sysenter_setup from .text between 'identify_cpu' (at offset 0xc040a380) and 'detect_ht' and WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_int80_end from .text between 'sysenter_setup' (at offset 0xc041a269) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_int80_start from .text between 'sysenter_setup' (at offset 0xc041a26e) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_sysenter_end from .text between 'sysenter_setup' (at offset 0xc041a275) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_sysenter_start from .text between 'sysenter_setup' (at offset 0xc041a27a) and 'enable_sep_cpu' Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Prarit Bhargava 提交于
Add __init to probe_bigsmp. All callers are __init and data being examined is __initdata. Resolves MODPOST warning similar to: WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'probe_bigsmp' (at offset 0xc0401e56) and 'init_apic_ldr' Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Stephane Eranian 提交于
Hello, This patch against 2.6.20-git14 makes the NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting Intel architectural perfmon, such as Intel Core 2. Although all PMU events can work on both counters, the Precise Event-Based Sampling (PEBS) requires that the event be in PERFCTR0 to work correctly (see section 18.14.4.1 in the IA32 SDM Vol 3b). This versions has 3 chunks compared to previous where we had missed on check. Changelog: - make the x86-64 NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting the Intel architectural perfmon (e.g. Core 2 Duo). This allows PEBS to work when the NMI watchdog is active. signed-off-by: Nstephane eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Stephane Eranian 提交于
Hello, This patch against 2.6.20-git14 makes the NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting Intel architectural perfmon, such as Intel Core 2. Although all PMU events can work on both counters, the Precise Event-Based Sampling (PEBS) requires that the event be in PERFCTR0 to work correctly (see section 18.14.4.1 in the IA32 SDM Vol 3b). A similar patch for x86-64 is to follow. Changelog: - make the i386 NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting the Intel architectural perfmon (e.g. Core 2 Duo). This allows PEBS to work when the NMI watchdog is active. signed-off-by: Nstephane eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Move prototypes into header files Remove unneeded includes. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
a userspace fault or a kernelspace fault which will result in the immediate death of the process. They should not be filled in as a result of a kernelspace fault which can be fixed up. Otherwise, if the process is handling SIGSEGV and examining the fault information, this can result in the kernel space fault trashing the previously stored fault information if it arrives between the userspace fault happening and the SIGSEGV being delivered to the process. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NJan Beulich <jbeulich@novell.com> -- arch/i386/kernel/traps.c | 24 ++++++++++++++++++------ arch/x86_64/kernel/traps.c | 30 +++++++++++++++++++++++------- 2 files changed, 41 insertions(+), 13 deletions(-)
-
由 Jan Beulich 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Rene Herman 提交于
Remove the assumption that if the first page of a legacy ROM is mapped, it'll all be mapped. This'll also stop people reading this code from wondering if they're looking at a bug... Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NMartin Murray <murrayma@citi.umich.edu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Simon Arlott 提交于
The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 takada 提交于
Eliminated the arch/i386/kernel/timers in 2.6.18, use clocksoures instead. pit_latch_buggy was referred in timers/timer_tsc.c, and currently removed. Therefore nobody refer it. Until 2.6.17, MediaGX's TSC works correctly. after 2.6.18, warned "TSC appears to be running slowly. Marking it as unstable". So marked unstable TSC when CS55x0. Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Whether a region is below 1Mb is determined by its start rather than its end. This hunk got erroneously dropped from a previous patch. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
No need to use -traditional for processing asm in i386/kernel/ Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Synchronize i386's smp_send_stop() with x86-64's in only try-locking the call lock to prevent deadlocks when called from panic(). In both version, disable interrupts before clearing the CPU off the online map to eliminate races with IRQ handlers inspecting this map. Also in both versions, save/restore interrupts rather than disabling/ enabling them. On x86-64, eliminate one function used here by folding it into its single caller, convert to static, and rename for consistency with i386 (lkcd may like this). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Avoid including asm/vsyscall32.h in virtually every source file. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Move inclusion of asm/fixmap.h to where it is really used rather than where it may have been used long ago (requires a few other adjustments to includes due to previous implicit dependencies). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
- make the page table contents printing PAE capable - make sure the address stored in current->thread.cr2 is unmodified from what was read from CR2 - don't call oops_may_print() multiple times, when one time suffices - print pte even in highpte case, as long as the pte page isn't in actually in high memory (which is specifically the case for all page tables covering kernel space) (Changes to v3: Use sizeof()*2 rather than the suggested sizeof()*4 for printing width, use fixed 16-nibble width for PAE, and also apply the max_low_pfn range check to the middle level lookup on PAE.) Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Ingo Molnar 提交于
Default to physical mode on hotplug CPU kernels. Furher simplify and clean up the APIC initialization code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-