- 30 4月, 2016 21 次提交
-
-
由 Andrzej Hajda 提交于
The helper abstracts out conversion from pipeline to crtc. Currently it is used in two places, but there will be more uses in next patches. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
decon_atomic_begin and decon_atomic_flush protects all windows already. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Resetting IP at starting ensures that DECON will be in known state regardless of changes by bootloader. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
DECON should be updated after un-protecting windows and after changing output parameters, otherwise image is not displayed in case of HDMI path. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI registry dump unnecessary spoils console and is not very helpful. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
To ensure HDMI-PHY reprogramming will not affect HDMI the latter should be reset. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI-PHY power off bit defaults to 0 in older HDMI versions. In case of Exynos5433 it defaults to 1. To make code consistent across all versions this bit is always unset/set in power on/off sequences. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Proper PHY configuration should be as follow: 1. set HDMI clock parents to OSCCLK. 2. reconfigure PHY. 3. set HDMI clock parents to PHY. 4. wait for PLL stabilization. The patch fixes it and consolidates the code. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI on Exynos5433 differs from previous versions: - different HDMI-PHY settings, - different clocks, - SYSREG registers for enabling reference clock, - MODE_SET register in HDMI-PHY. It is distinguished from other variants by different compatible string. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
There is no point in rewriting default values, as the IP is reset anyway. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The patch performs following clean-ups: - remove unnecessary white spaces, - remove obvious comments, - fix tabulations, - remove NULL initializators, - re-order driver data. The patch does not change driver's behavior. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI-PHY configurations are stored as array pointer and count pair, we can re-use existing helpers to simplify their initialization. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
These variables should not be modified. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
With incoming support for newer SoCs different set of clocks will be required, depending on IP version. The patch prepares the driver for it. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Javier Martinez Canillas 提交于
Commit 254d4d11 ("drm/exynos: Add dependency for G2D in Kconfig") made the DRM_EXYNOS_G2D symbol to only be selectable if the s5p-g2d V4L2 driver is not enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_S5P_G2D which isn't correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_S5P_G2D=y but it will evaluate to m if VIDEO_SAMSUNG_S5P_G2D=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which is not what we want. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Dan Carpenter 提交于
The "ret = regmap_write()" assignment was missing so this error message is never printed. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Dan Carpenter 提交于
We accidentally return success instead of a negative error code here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Marek Szyprowski 提交于
Commit 1feafd3a ("drm/exynos: add exynos5420 support for fimd") add support for Exynos 5420 SoC, but it broke enabling display clock feature because of incorrect condition check. This patch fixes it, so display is working again on platforms requiring display clock control (i.e. Exynos5250-based SNOW platform). Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Fbdev code should be compiled only if CONFIG_DRM_FBDEV_EMULATION option is enabled. The patch fixes exynos-drm code trying to manipulate fbdev data which is not initialized in case CONFIG_DRM_FBDEV_EMULATION is disabled. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
exynos_plane_mode_set should use adjusted_mode from the same atomic state as plane state. Otherwise it will result in incorrect behavior in case crtc mode changes. The patch fixes bug with black console framebuffer in case of command mode panels. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Arnd Bergmann 提交于
gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 28 4月, 2016 5 次提交
-
-
由 Maxime Ripard 提交于
Add the settings to support the NTSC standard. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Now that we have support for the composite output, we can start adding new supported standards. Start with PAL, and we will add other eventually. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Some Allwinner SoCs have an IP called the TV encoder that is used to output composite and VGA signals. In such a case, we need to use the second TCON channel. Add support for that TV encoder. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
One of the A10 display pipeline possible output is an RGB interface to drive LCD panels directly. This is done through the first channel of the TCON that will output our video signals directly. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 27 4月, 2016 4 次提交
-
-
由 Daniel Vetter 提交于
Need to move the free function around a bit, but otherwise mostly just removing code. Specifically we can nuke all the _locked variants since the weak idr reference is now protected by the idr_mutex, which we never hold anywhere expect in the lookup/reg/unreg functions. And those never call anything else. Another benefit of this is that this patch switches the weak reference logic from kref_put_mutex to kref_get_unless_zero. And the later is in general more flexible wrt accomodating multiple weak references protected by different locks, which might or might not come handy eventually. But one consequence of that switch is that we need to acquire the blob_lock from the free function for the list_del calls. That's a bit tricky to pull off, but works well if we pick the exact same scheme as is already used for framebuffers. Most important changes: - filp list is maintainer by create/destroy_blob ioctls directly (already the case, so we can just remove the redundant list_del from the free function). - filp close handler walks the filp-private list lockless - works because we know no one else can access it. I copied the same comment from the fb code over to explain this. - Otherwise we need to sufficiently restrict blob_lock critical sections to avoid all the unreference calls. Easy to do once the blob_lock only protects the list, and no longer the weak reference. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Random drive-by refactoring I spotted. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Dave Airlie had at least the refcount leak fixed in a later patch (but that patch does other things which need a bit more work). But we still have the trouble that silly userspace could hit the WARN_ON in drm_mode_object_find. Fix this all up to make sure we don't leak objects, and don't spew into demsg. Fixes: d0f37cf6 ("drm/mode: move framebuffer reference into object.") Testcase: igt/kms_addfb_basic/invalid-*-prop* Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Slipped through the cracks in my review. The one issue I spotted is that drm_mode_object_find now acquires references and can be used on FB objects, which caused follow-on bugs in get/set_prop ioctls. Follow-up patches will fix that. [airlied: fixup some incr fb/decr object mixups] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 26 4月, 2016 10 次提交
-
-
由 Carlos Palminha 提交于
ARC PGU could be found on some development boards from Synopsys. This is a simple byte streamer that reads data from a framebuffer and sends data to the single encoder. Signed-off-by: NCarlos Palminha <palminha@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
-
由 Stefan Agner 提交于
The driver supports now a second platform and received several fixes, hence a version increment is justified. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Use CMA helper drm_fbdev_cma_restore_mode to restore fbdev mode in process which uses drm/kms dies. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Disabling output polling before unloading the driver. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Free fbdev CMA using drm_fbdev_cma_fini on unload. This fixes a warning when unloading the driver: WARNING: CPU: 0 PID: 164 at drivers/gpu/drm/drm_crtc.c:5930 drm_mode_config_cleanup+0x204/0x208 Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
The driver uses different variable names for struct drm_device across functions which is confusing. Stick to the more common variable name dev. While at it, remove unnecessary if statement in error handling. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
If the device tree property fsl,panel is missing, drm_panel_attach is called with a NULL pointer as first argument. Having a panel is basically mandatory since RGB is the only supported connector. Check if a panel node has been found, return -ENODEV and cleanup otherwise. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Disable the earlier attached panel on connector destroy. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Arnd Bergmann 提交于
The fsl-dcu driver copies a drm_mode_config object to its stack but then only accesses a single member (dpms_property) once. The data structure is large enough to trigger a warning about the amount of kernel stack being used: drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c: In function 'fsl_dcu_drm_connector_create': drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This changes the fsl_dcu_drm_connector_create() function to only access the drm_mode_config by reference, which is also more efficient. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 109eee2f ("drm/layerscape: Add Freescale DCU DRM driver") Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Add driver for the TCON (timing controller) module. The TCON module is a separate module attached after the DCU (display controller unit). Each DCU instance has its own, directly connected TCON instance. The DCU's RGB and timing signals are passing through the TCON module. TCON can provide timing signals for raw TFT panels or operate in a bypass mode which leaves all signals unaltered. The driver currently only supports the bypass mode. Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NStefan Agner <stefan@agner.ch>
-