mainline inclusion
from mainline-v5.15-rc1
commit 0cb07041
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0cb0704149f0d9d3b7c68ebab932fc27222c740b

----------------------------------------------------------------------

Add some required spaces in comment for cleanup.
Signed-off-by: NHao Chen <chenhao288@hisilicon.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit aec35aec
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aec35aecc3ccc822b358e2594ff70ff54245261e

----------------------------------------------------------------------

Currently, function hclge_check_port_speed() uses switch/case statement
to get speed bit according to speed. To reuse this part of code and
improve code readability and maintainability, add a new function
hclge_get_speed_bit() to get speed bit according to map relationship
of speed and speed bit defined in array speed_bit_map.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 5a24b1fd
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5a24b1fd301e0cf0fc58a76f2716c54d378002cf

----------------------------------------------------------------------

There are some repetitive macros have same meaning and value, this patch
merges them to make code clean.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.15-rc1
commit 4c116f85
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4BY3P
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4c116f85ecf8c147450602ed47ee25de60807f45

----------------------------------------------------------------------

To improve code readability, replace digital numbers of mac speeds
defined by firmware command with macros.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 9f0c6f4b
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9f0c6f4b7475dd97e1f0eed81dd6ff173cf8c7fc

----------------------------------------------------------------------

For device whose version is above V3(include V3), the GL can
select EQE or CQE mode, so adds support for it.

In CQE mode, the coalesced timer will restart when the first new
completion occurs, while in EQE mode, the timer will not restart.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit 3462207d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3462207d2d684658d97499ca77c00c9ac7c87ea8

----------------------------------------------------------------------

The GRO configuration is enabled by default after reset. This
is incorrect and should be restored to the user-configured value.
So this restoration is added during reset initialization.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit 94391fae
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=94391fae82f71c98ecc7716a32611fcca73c74eb

----------------------------------------------------------------------

VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit b15c072a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b15c072a9f4a404c09ad589477f4389034742a8b

----------------------------------------------------------------------

In bond 4, when the link goes down and up repeatedly, the bond may get an
unknown speed, and then this port can not work.

The driver notify netif_carrier_on() before update the link state, when the
bond receive carrier on, will query the speed of the port, if the query
operation happens before updating the link state, will get an unknown
speed. So need to notify netif_carrier_on() after update the link state.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14
commit 1a6d2819
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N6O
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a6d281946c330cee2855f6d0cd796616e54601f

----------------------------------------------------------------------

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f5c2b9f0
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5c2b9f0fc078308a88de807d60cd4e352a165fc

----------------------------------------------------------------------

In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit ddccc5e3
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I46N7D
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ddccc5e368a33daeb6862192d4dca8e59af9234a

----------------------------------------------------------------------

Currently, four reset types are supported for the HNS3 ethernet
driver: IMP reset, global reset, function reset, and FLR. Only
FLR can now be triggered by the user. To restore the device when
an exception occurs, add support for triggering reset by ethtool.

Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to
trigger the IMP | global | function reset manually.

In addition, VF can only trigger function reset.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit b741269b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b741269b275953786832805df329851299ab4de7

----------------------------------------------------------------------

Add devlink register support for HNS3 ethernet PF driver.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 184cd221
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=184cd221a86321e53df9389c4b35a247b60c1e77

----------------------------------------------------------------------

For hardware limitation, port VLAN filter is port level, and
effective for all the functions of the port. So if not support
port VLAN bypass, it's necessary to disable the port VLAN filter,
in order to support function level VLAN filter control.

Fixes: 2ba30662 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 03a92fe8
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=03a92fe8cedb6f619df416d38d0b57fd55070cd7

----------------------------------------------------------------------

Previously, the flow director counter is not enabled. To improve the
maintainability for chechking whether flow director hit or not, enable
flow director counter for each function, and add debugfs query inerface
to query the counters for each function.

The debugfs command is below:
cat fd_counter
func_id    hit_times
pf         0
vf0        0
vf1        0
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1a00197b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a00197b7d2fe57f0be93037d5090e19a9b178c8

----------------------------------------------------------------------

Add support to query tx spare buffer size from configuration
file, and use this info to do spare buffer initialization when
the module parameter 'tx_spare_buf_size' is not specified.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0bf5eb78
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0bf5eb788512187b744ef7f79de835e6cbe85b9c

----------------------------------------------------------------------

Adds PTP support for HNS3 ethernet driver.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 4724acc4
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4724acc47c9441ec1e131299853d1a9e8c3fb2cd

----------------------------------------------------------------------

Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NBaokun Li <libaokun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1c360a4a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1c360a4a077fc0f74a350fe2ef267cbe8a9388e3

----------------------------------------------------------------------

During initialization, the driver logs and clears the hw errors that
already occurred. For device supports imp-handle ras capability, it
needs handle different error status, otherwise it may cause wrong reset.

So fix it by adding a new processing branch.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 8a95e360
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8a95e360fd512f1cb55239645879b15d26bc7e21

----------------------------------------------------------------------

Update error recovery module and type for RoCE.

The enumeration values of module names and error types are not sorted
in sequence. If use the current printing mode, they cannot be correctly
printed.

Use the index mode, If mod_id and type_id match the enumerated value,
display the corresponding information.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e65e9f5c
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e65e9f5c2e4efc17657d016d767eb7010d9dd598

----------------------------------------------------------------------

IMP(Intelligent Management Processor) firmware add a new feature to
handle and consolidate RAS information for new devices, NIC driver
only needs to query the reported RAS information. NIC driver adds
support for this feature.

Driver queries device capability to check whether IMP support this
feature, If yes, execute the new RAS processing branch.

In order to add a method to check whether PF supports imp-handle RAS
feature, add dumping this info in debugfs.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2e2deee7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2e2deee7618b062efe3aba9fcb017dadcf148819

----------------------------------------------------------------------

To adapt to hardware modification and ensure that the driver is
compatible with the original error handling content, we need to add the
RAS compatibility adaptation solution.

Add a processing branch to the driver during error handling. In the new
processing branch, NIC fault information is integrated by the IMP. An
interaction command is added between the driver and IMP to query
and clear the fault source and interrupt source. The IMP integrates
error information and reports the highest reset level to the driver.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 17f59244
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=17f59244029bf9c0673725efdd0386ed95e127a7

----------------------------------------------------------------------

Currently, hardware errors can be reported through AER or MSI-X mode.
However, the AER mode is intended to handle only bus errors, but not
hardware errors. On the other hand, virtual machines cannot handle
AER errors. When an AER error is reported, virtual machines will be
suspended. So add support for handling all these hardware errors
through MSI-X mode which depends on a newer version of firmware,
and reserve the handler of the AER mode for compatibility.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit e0fe0a38
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e0fe0a38371b6d2d669e231c1fd68ce620dfa6b2

----------------------------------------------------------------------

Earlier patches have decoupled the MSI-X conveyed error handling
and recovery logic. This earlier concept code is no longer required.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit aff399a6
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aff399a638da7e56680cdf6fa7544b67e0373a4e

----------------------------------------------------------------------

Error handling & recovery is done in context of reset task which
gets scheduled from misc interrupt handler in existing code. But
since error handling has been moved to new task, it should get
scheduled instead of the reset task from the interrupt handler.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit d991452d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d991452dd7900cf152ffb43db3b1d385e1a01579

----------------------------------------------------------------------

Error handling and recovery logic are intertwined. Error handling (i.e.
error identification, clearing error sources and initiation of recovery)
is done in context of reset task. If certain hardware errors get
delivered during driver init time, which can cause driver init/loading
to fail.

Introduce a separate error handling task to ensure below:

1. Reset logic remains independent of the error handling logic.
2. Add the hclge_errhand_task_schedule to schedule error recovery
tasks, This will ensure that common misellaneous MSI-X interrupt are
re-enabled quickly.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 0ca821da
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ca821da86a5ec24eb2ece24fe87e5bf518c5939

----------------------------------------------------------------------

Add debugfs support for vlan configuraion. create a single file
"vlan_config" for it, and query it by command "cat vlan_config",
return the result to userspace.

The new display style is below:
$ cat vlan_config
I_PORT_VLAN_FILTER: on
E_PORT_VLAN_FILTER: off
FUNC_ID  I_VF_VLAN_FILTER  E_VF_VLAN_FILTER  PORT_VLAN_FILTER_BYPASS
pf       off               on                off
vf0      off               on                off
FUNC_ID  PVID    ACCEPT_TAG1  ACCEPT_TAG2  ACCEPT_UNTAG1  ACCEPT_UNTAG2
pf       0       on           on           on             on
vf0      0       on           on           on             on
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit fa6a262a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fa6a262a255003ebb1f514fffd3399f3946d4fc9

----------------------------------------------------------------------

Previously, there is hardware limitation for VF to modify
the VLAN filter state, and the VLAN filter state is default
enabled. Now the limitation has been removed in some device,
so add capability flag to check whether the device supports
modify VLAN filter state. If flag on, user will be able to
modify the VLAN filter state by ethtool -K.
VF needs to send mailbox to request the PF to modify the VLAN
filter state for it.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 2ba30662
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ba306627f5950c9a7850f3b0499d39e522dc249

----------------------------------------------------------------------

Previously, with hardware limitation, the port VLAN filter are
effective for both PF and its VFs simultaneously, so a single
function is not able to enable/disable separately, and the VLAN
filter state is default enabled. Now some device supports each
function to bypass port VLAN filter, then each function can
switch VLAN filter separately. Add capability flag to check
whether the device supports modify VLAN filter state. If flag
on, user will be able to modify the VLAN filter state by ethtool
-K.

Furtherly, the default VLAN filter state is also changed
according to whether non-zero VLAN used. Then the device can
receive packet with any VLAN tag if only VLAN 0 used.

The function hclge_need_enable_vport_vlan_filter() is used to
help implement above changes. And the VLAN filter handle for
promisc mode can also be simplified by this function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit f2dbf0ed
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f2dbf0ed4e0c1789cc7c74ab3798bd0cdb7a2bf1

----------------------------------------------------------------------

Use struct "hclge_vlan_info" instead of separately parameters
for function hclge_push_vf_port_base_vlan_info(), to make it
more concise.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit b44eb28d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b44eb28d44a65370e77d0bcd9a87cee3fa1daaca

----------------------------------------------------------------------

Currently, option "qos" is igored by HNS3 driver for command
"ip link set ethx vf <vf id> vlan <vlan id> qos <qos value>".
Add support for it.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 4e2471f7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4e2471f7b6ef5a564cd05bc5fb9f3ce71b7b7942

----------------------------------------------------------------------

Currently, PF is using HCLGE_STATE_PROMISC_CHANGED to indicate
need synchronize the promisc mode for itself, and using flag
HCLGE_VPORT_STATE_PROMISC_CHANGE for its VF. To keep consistent,
remove flag HCLGE_STATE_PROMISC_CHANGED, and use flag
HCLGE_VPORT_STATE_PROMISC_CHANGE instead.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1e6e7610
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1e6e76101fd9f51319a742991778bdc3b2d992d9

----------------------------------------------------------------------

Currently, when host set VF untrusted, the driver will disable
the promisc mode of VF. It may be conflicted when the VF requests
the host to set promisc mode. So refactor it by changing promisc
mode for VF asynchronously. With this change, the promisc mode of
VF can be restored when the VF being trusted again.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit b4689aaf
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b4689aaf18633ff1b9ce37b09e226a7964ce9751

----------------------------------------------------------------------

Currently, all debugfs commands have been reconstructed, and the
debugfs file node cmd is useless. So remove this debugfs file node.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1a7ff828
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1a7ff8280b16fe8a085e24aca9008724700d6878

----------------------------------------------------------------------

Currently, the debugfs command for reset info is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"reset_info" for it, and query it by command "cat reset_info",
return the result to userspace, rather than record in dmesg.

The display style is below:
$cat reset_info
PF reset count: 0
FLR reset count: 0
GLOBAL reset count: 0
IMP reset count: 0
reset done count: 0
HW reset done count: 0
reset count: 0
reset fail count: 0
vector0 interrupt enable status: 0x1
reset interrupt source: 0x0
reset interrupt status: 0x0
RAS interrupt status:0x0
hardware reset status: 0x0
handshake status: 0x80
function reset status: 0x0

Change to the "hclge_show_rst_info" in the "hclge_reset_err_handle",
when the reset fails, display reset info immediately.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 79664077
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=796640778c26f3d99fde173bb7b1d726b5f0d816

----------------------------------------------------------------------

Currently, the driver gets packet type by parsing the
L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's
time-consuming.

Now some new devices support RXD advanced layout, which combines
previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets
packet type by looking up only one table, and L3_ID/L4_ID become
reserved fields.

Considering compatibility, the firmware will report capability of
RXD advanced layout, the driver will identify and enable it by
default. This patch provides basic function: identify and enable
the RXD advanced layout, and refactor out hns3_rx_checksum() by
using ptype table to handle RX checksum if supported.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8c9200e3
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8c9200e387721c597baabb319b4bd1cdf1155e35

----------------------------------------------------------------------

HW error and global reset are reported through MSIX interrupts.
The same error may be reported to different functions at the
same time. When global reset begins, the pending reset request
set by this error is unnecessary. So clear the pending reset
request after the reset is complete to avoid the repeated reset.

Fixes: f6162d44 ("net: hns3: add handling of hw errors reported through MSIX")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 1c5a2ba6
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1c5a2ba67989c01b8aeda81969b7a4a3702c51b5

----------------------------------------------------------------------

When enter suspend mode the counter of pf reset will be increased
twice, since both hclge_prepare_general() and hclge_prepare_wait()
increase this counter. So remove the duplicate counting in
hclge_prepare_general().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 18b6e31f
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18b6e31f8bf4ac7af7b057228f38a5a530378e4e

----------------------------------------------------------------------

Previously, VF updates its link status every second by send query command
to PF in periodic service task. If link stats of PF is changed, VF may
need at most one second to update its link status.

To reduce delay of link status between PF and VFs, PF actively push its
link status to VFs when its link status is updated. And to let VF know
PF supports this new feature, the link status changed mailbox command
adds one bit to indicate it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
commit cd7e963d
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cd7e963d2f0875789ddb5c3746b628716bd0a8c9

----------------------------------------------------------------------

Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 715c58e9
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=715c58e94f0d78907bfccde12c2ca5236502c53e

----------------------------------------------------------------------

To implement the system suspend/resume functions, the NIC driver needs
to support:
1. When the system enters the suspend mode, the driver needs to
implement the suspend callback function of the NIC device. The driver
needs to mute the device, stop all RX/TX activities of the device, and
unmap the interrupt.
2. When the system enters the resume mode, the driver needs to
implement the resume callback function of the NIC device and restore
the device to the state before suspension.

When the system enters the suspend and resume mode, the NIC driver
actually executes the PF function reset process.

When the PFs are suspending/resuming, VFs also enter the suspend/resume
state because the PFs trigger the VFs to reset, therefore no operation
is required when the VF pci_driver is suspending or resuming.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>