This patch removes the unused macros.
Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

CHECK: braces {} should be used on all arms of this statement
+	if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I)
[...]
+	else {
[...]
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

WARNING: Missing a blank line after declarations
+		struct sk_buff *new;
+		if (uncompress_udp_header(skb, &uh))
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch fixes all the issues with alignment matching of open
parenthesis found by checkpatch.pl and makes them follow the
network coding style now.

CHECK: Alignment should match open parenthesis
+static int uncompress_addr(struct sk_buff *skb,
+				struct in6_addr *ipaddr, const u8 address_mode,

CHECK: Alignment should match open parenthesis
+static int uncompress_context_based_src_addr(struct sk_buff *skb,
+						struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
+		struct net_device *dev, skb_delivery_cb deliver_skb)

CHECK: Alignment should match open parenthesis
+	new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
+								GFP_ATOMIC);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump before receiving",
+			new->data, new->len);

CHECK: Alignment should match open parenthesis
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is",
+				ipaddr->s6_addr, 16);

CHECK: Alignment should match open parenthesis
+int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
+		const u8 *saddr, const u8 saddr_type, const u8 saddr_len,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump uncompressed",
+				skb->data, skb->len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
+					saddr_type, saddr_len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
+					daddr_type, daddr_len);

CHECK: Alignment should match open parenthesis
+		pr_debug("dest: stateless compression mode %d dest %pI6c\n",
+			tmp, &hdr.daddr);

CHECK: Alignment should match open parenthesis
+		raw_dump_table(__func__, "raw UDP header dump",
+				      (u8 *)&uh, sizeof(uh));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
+							sizeof(hdr));

CHECK: Alignment should match open parenthesis
+int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, const void *_daddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb network header dump",
+		skb_network_header(skb), sizeof(struct ipv6hdr));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__,
+			"sending raw skb network uncompressed packet",

CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

WARNING: quoted string split across lines
+			pr_debug("dest address unicast link-local %pI6c "
+				"iphc1 0x%02x\n", &hdr->daddr, iphc1);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump compressed",
+				skb->data, skb->len);
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch fixes all the block comment issues found by checkpatch.pl and
makes them match the network style now.

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Based on patches from Jon Smirl <jonsmirl@gmail.com>

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source and

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source context

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * UDP lenght needs to be infered from the lower layers

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic Class and FLow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Flow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * replace the compressed UDP head by the uncompressed UDP

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * As we copy some bit-length fields, in the IPHC encoding bytes,

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class, flow label

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Hop limit
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This define is unused since commit
96cb3eb7 ("6lowpan: fix fragmentation on
sending side"). It is a worst case scenario for payload calculation.
Since commit 96cb3eb7 we calculation the
payload to use the optimal size.

This define is also necessary for ieee802154 6lowpan only and the file
include/net/6lowpan.h should contain generic 6lowpan things only.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This memory is placed on stack and can't be null so remove the check on
null.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the own implementation to check of link-layer,
broadcast and any address type and use the IPv6 api for that.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch uses the lowpan_push_hc_data functions in several places
where we can use it. The lowpan_push_hc_data was introduced in some
previous patches.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We introduced the lowpan_fetch_skb function in some previous patches for
6lowpan to have a generic fetch function. This patch drops the old
function and use the generic lowpan_fetch_skb one.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The hc06_ptr pointer variable stands for header compression draft-06. We
are mostly rfc complaint. This patch rename the variable to normal hc_ptr.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The HCI_CONN_LE_SMP_PEND flag is supposed to indicate whether we have an
SMP context or not. If the context creation fails, or some other error
is indicated between setting the flag and creating the context the flag
must be cleared first.

This patch ensures that smp_chan_create() clears the flag in case of
allocation failure as well as reorders code in smp_cmd_security_req()
that could lead to returning an error between setting the flag and
creating the context.

Without the patch the following kind of kernel crash could be observed
(this one because of unacceptable authentication requirements in a
Security Request):

[  +0.000855] kernel BUG at net/bluetooth/smp.c:606!
[  +0.000000] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[  +0.000000] CPU: 0 PID: 58 Comm: kworker/u5:2 Tainted: G        W     3.16.0-rc1+ #785
[  +0.008391] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  +0.000000] Workqueue: hci0 hci_rx_work
[  +0.000000] task: f4dc8f90 ti: f4ef0000 task.ti: f4ef0000
[  +0.000000] EIP: 0060:[<c13432b6>] EFLAGS: 00010246 CPU: 0
[  +0.000000] EIP is at smp_chan_destroy+0x1e/0x145
[  +0.000709] EAX: f46db870 EBX: 00000000 ECX: 00000000 EDX: 00000005
[  +0.000000] ESI: f46db870 EDI: f46db870 EBP: f4ef1dc0 ESP: f4ef1db0
[  +0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[  +0.000000] CR0: 8005003b CR2: b666b0b0 CR3: 00022000 CR4: 00000690
[  +0.000000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  +0.000000] DR6: fffe0ff0 DR7: 00000400
[  +0.000000] Stack:
[  +0.000000]  00000005 f17b7840 f46db870 f4ef1dd4 f4ef1de4 c1343441 c134342e 00000000
[  +0.000000]  c1343441 00000005 00000002 00000000 f17b7840 f4ef1e38 c134452a 00002aae
[  +0.000000]  01ef1e00 00002aae f46bd980 f46db870 00000039 ffffffff 00000007 f4ef1e34
[  +0.000000] Call Trace:
[  +0.000000]  [<c1343441>] smp_failure+0x64/0x6c
[  +0.000000]  [<c134342e>] ? smp_failure+0x51/0x6c
[  +0.000000]  [<c1343441>] ? smp_failure+0x64/0x6c
[  +0.000000]  [<c134452a>] smp_sig_channel+0xad6/0xafc
[  +0.000000]  [<c1053b61>] ? vprintk_emit+0x343/0x366
[  +0.000000]  [<c133f34e>] l2cap_recv_frame+0x1337/0x1ac4
[  +0.000000]  [<c133f34e>] ? l2cap_recv_frame+0x1337/0x1ac4
[  +0.000000]  [<c1172307>] ? __dynamic_pr_debug+0x3e/0x40
[  +0.000000]  [<c11702a1>] ? debug_smp_processor_id+0x12/0x14
[  +0.000000]  [<c1340bc9>] l2cap_recv_acldata+0xe8/0x239
[  +0.000000]  [<c1340bc9>] ? l2cap_recv_acldata+0xe8/0x239
[  +0.000000]  [<c1169931>] ? __const_udelay+0x1a/0x1c
[  +0.000000]  [<c131f120>] hci_rx_work+0x1a1/0x286
[  +0.000000]  [<c137244e>] ? mutex_unlock+0x8/0xa
[  +0.000000]  [<c131f120>] ? hci_rx_work+0x1a1/0x286
[  +0.000000]  [<c1038fe5>] process_one_work+0x128/0x1df
[  +0.000000]  [<c1038fe5>] ? process_one_work+0x128/0x1df
[  +0.000000]  [<c10392df>] worker_thread+0x222/0x2de
[  +0.000000]  [<c10390bd>] ? process_scheduled_works+0x21/0x21
[  +0.000000]  [<c103d34c>] kthread+0x82/0x87
[  +0.000000]  [<c1040000>] ? create_new_namespaces+0x90/0x105
[  +0.000000]  [<c13738e1>] ret_from_kernel_thread+0x21/0x30
[  +0.000000]  [<c103d2ca>] ? __kthread_parkme+0x50/0x50
[  +0.000000] Code: 65 f4 89 f0 5b 5e 5f 5d 8d 67 f8 5f c3 57 8d 7c 24 08 83 e4 f8 ff 77 fc 55 89 e5 57 89 c7 56 53 52 8b 98 e0 00 00 00 85 db 75 02 <0f> 0b 8b b3 80 00 00 00 8b 00 c1 ee 03 83 e6 01 89 f2 e8 ef 09
[  +0.000000] EIP: [<c13432b6>] smp_chan_destroy+0x1e/0x145 SS:ESP 0068:f4ef1db0
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

It has taken me a long long time to get the OOB interrupt working on the
AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the
end I found these magic register pokes in the cubietruck kernel tree:
https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a

This is also done for the bcm43362 in broadcom's internal/proprietary driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
[arend@broadcom.com: rebased changing BCM43362 chip id to fix compilation]
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Not doing so, could fail on device probing when use_chanctx
module param is set to true.
Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't
require any magic. The main difference is that BCM4313 is 1x1:1.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

brcmfmac devices can use an out-of-band interrupt on a GPIO line.
Currently this is specified using platform data. Add support for
specifying out-of-band interrupt via device tree.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
[arend@broadcom.com: conditionalize more of-code, use driver debug routines]
Signed-off-by: NArend van Spriel <arend@broadcom.com>
[hdegoede@redhat.com: drop clk / reg_on gpio handling, as there is no consensus
 on how to handle this yet]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The Broadcom bcm43xx sdio devices are fullmac devices that may be
integrated in ARM platforms. Currently, the brcmfmac driver for
these devices support use of platform data. This patch specifies
the bindings that allow this platform data to be expressed in the
devicetree.
Reviewed-by: NHante Meuleman <meuleman@broadcom.com>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NDaniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
[hdegoede@redhat.com: drop clk / reg_on gpio handling, as there is no consensus
 on how to handle this yet]
[hdegoede@redhat.com: move from bindings/staging to bindings]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Samuel Ortiz <sameo@linux.intel.com> says:

"NFC: 3.17 pull request

This is the NFC pull request for 3.17.
This is a rather quiet one, we have:

- A new driver from ST Microelectronics for their NCI ST21NFCB,
  including device tree  support.

- p2p support for the ST21NFCA driver

- A few fixes an enhancements for the NFC digital layer"
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If we have entries in the whitelist we shouldn't disable page scanning
when disabling connectable mode. This patch adds the necessary check to
the Set Connectable command handler.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fixes a typo in the hci_cc_write_scan_enable() function where
we want to clear the HCI_PSCAN flag if the SCAN_PAGE bit of the HCI
command parameter was not set.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Since commit 68d96dcf ("MAINTAINERS: add
net/6lowpan/ maintainer entry") we have a 6lowpan branch. This patch
adds a forgotten file which should also be maintained by this branch.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With the Bluetooth 4.1 specification the Simultaneous LE and BR/EDR
controller option has been deprecated. It shall be set to zero and
ignored otherwise.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Expose the default values for minimum and maximum LE advertising
interval via debugfs for testing purposes.
Signed-off-by: NGeorg Lukas <georg@op-co.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Store the default values for minimum and maximum advertising interval
with all the other controller defaults. These vaules are sent to the
adapter whenever advertising is (re)enabled.
Signed-off-by: NGeorg Lukas <georg@op-co.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Devices using resolvable private addresses are required to provide
an identity resolving key. These devices can not be found using
the current controller white list support. This means if the kernel
knows about any devices with an identity resolving key, the white
list filtering must be disabled.

However so far the kernel kept identity resolving keys around even
for devices that are not using resolvable private addresses. The
notification to userspace clearly hints to not store the key and
so it is best to just remove the key from the kernel as well at
that point.

With this it easy now to detect when using the white list is
possible or when kernel side resolving of addresses is required.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The Bluetooth controller can use a white list filter when scanning
to avoid waking up the host for devices that are of no interest.

Devices marked as reporting, direct connection (incoming) or general
connection are now added to the controller white list. The update of
the white list happens just before enabling passive scanning.

In case the white list is full and can not hold all devices, the
white list is not used and the filter policy set to accept all
advertisements.

Using the white list for scanning allows for power saving with
controllers that do not handle the duplicate filtering correctly.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Conflicts:
	net/mac80211/cfg.c
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In case of A-MSDU RX we should check attention flags
correctly to be sure we report correct FCS status for
A-MSDU subframes. Without a patch we could report A-MSDU
subframes with wrong FCS as a correct to the stack, next
get a lot of DUP ACK TCP packets. Finally TP drop is seen
and this drop depends on FCS errors ratio for A-MSDU frame.

Example test case when TP drop is seen:
- ath10k configured as an AP
- used ath10k station
- forced A-MSDU (7 frames) on STA
- other traffic on channel (often FCS errors)
- monitor iface added on AP
- TCP STA -> AP traffic (iperf)

a) Iperf logs for case without the patch:

echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 5.0 sec  56.6 MBytes  95.0 Mbits/sec
[  3]  5.0-10.0 sec  60.4 MBytes   101 Mbits/sec
[  3] 10.0-15.0 sec  60.2 MBytes   101 Mbits/sec
[  3] 15.0-20.0 sec  60.2 MBytes   101 Mbits/sec
[  3] 20.0-25.0 sec  63.8 MBytes   107 Mbits/sec
[  3] 25.0-30.0 sec  64.9 MBytes   109 Mbits/sec

echo "7 64" > htt_max_amsdu_ampdu  // set 7 A-MSDU subframes
[  3] 30.0-35.0 sec  40.0 MBytes  67.1 Mbits/sec
[  3] 35.0-40.0 sec  35.9 MBytes  60.2 Mbits/sec
[  3] 40.0-45.0 sec  36.9 MBytes  61.9 Mbits/sec
[  3] 45.0-50.0 sec  37.9 MBytes  63.5 Mbits/sec
[  3] 50.0-55.0 sec  34.5 MBytes  57.9 Mbits/sec
[  3] 55.0-60.0 sec  25.4 MBytes  42.6 Mbits/sec
[  3] 60.0-65.0 sec  48.2 MBytes  81.0 Mbits/sec
[  3] 65.0-70.0 sec  28.8 MBytes  48.2 Mbits/sec
[  3] 70.0-75.0 sec  29.2 MBytes  49.1 Mbits/sec
[  3] 75.0-80.0 sec  22.9 MBytes  38.4 Mbits/sec
[  3] 80.0-85.0 sec  26.4 MBytes  44.2 Mbits/sec
[  3] 85.0-90.0 sec  31.5 MBytes  52.8 Mbits/sec

b) Iperf logs for case with patch:

echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU
[  3] local 192.168.12.2 port 57512 connected with 192.168.12.1 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 5.0 sec  60.8 MBytes   102 Mbits/sec
[  3]  5.0-10.0 sec  62.2 MBytes   104 Mbits/sec
[  3] 10.0-15.0 sec  60.9 MBytes   102 Mbits/sec

echo "7 64" > htt_max_amsdu_ampdu  // set 7 A-MSDU subframes
[  3] 15.0-20.0 sec  68.1 MBytes   114 Mbits/sec
[  3] 20.0-25.0 sec  80.5 MBytes   135 Mbits/sec
[  3] 25.0-30.0 sec  83.0 MBytes   139 Mbits/sec
[  3] 30.0-35.0 sec  79.1 MBytes   133 Mbits/sec
[  3] 35.0-40.0 sec  77.1 MBytes   129 Mbits/sec
[  3] 40.0-45.0 sec  77.4 MBytes   130 Mbits/sec
Reported-by: NDenton Gentry <denton.gentry@gmail.com>
Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

The 10.x firmware does not support IBSS mode at
all. It can't beacon and it crashes when trying to
scan.
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Firmware doesn't perform Rx reordering so it is
left to the host driver to do that.

Use mac80211 to perform reordering instead of
re-inventing the wheel.

This fixes TCP throughput issues in some
environments.
Reported-by: NDenton Gentry <denton.gentry@gmail.com>
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

When adding remote devices to the kernel using the Add Device management
command, these devices are explicitly allowed to connect. This kind of
incoming connections are possible even when the controller itself is
not connectable.

For BR/EDR this distinction is pretty simple since there is only one
type of incoming connections. With LE this is not that simple anymore
since there are ADV_IND and ADV_DIRECT_IND advertising events.

The ADV_DIRECT_IND advertising events are send for incoming (slave
initiated) connections only. And this is the only thing the kernel
should allow when adding devices using action 0x01. This meaning
of incoming connections is coming from BR/EDR and needs to be
mapped to LE the same way.

Supporting the auto-connection of devices using ADV_IND advertising
events is an important feature as well. However it does not map to
incoming connections. So introduce a new action 0x02 that allows
the kernel to connect to devices using ADV_DIRECT_IND and in addition
ADV_IND advertising reports.

This difference is represented by the new HCI_AUTO_CONN_DIRECT value
for only connecting to ADV_DIRECT_IND. For connection to ADV_IND and
ADV_DIRECT_IND the old value HCI_AUTO_CONN_ALWAYS is used.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Unconditionally connecting to devices sending ADV_DIRECT_IND when
the controller is in CONNECTABLE mode is a feature that is not
fully working. The background scanning trigger for this has been
removed, but the statement allowing it to happen in case some
other part triggers is still present. So remove that code part
as well to avoid unwanted connections.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

If the Bluetooth controller supports Get MWS Transport Layer
Configuration command, then issue it during initialization.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>