Add a generic implementation of NHPoly1305, an ε-almost-∆-universal hash
function used in the Adiantum encryption mode.

CONFIG_NHPOLY1305 is not selectable by itself since there won't be any
real reason to enable it without also enabling Adiantum support.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Expose a low-level Poly1305 API which implements the
ε-almost-∆-universal (εA∆U) hash function underlying the Poly1305 MAC
and supports block-aligned inputs only.

This is needed for Adiantum hashing, which builds an εA∆U hash function
from NH and a polynomial evaluation in GF(2^{130}-5); this polynomial
evaluation is identical to the one the Poly1305 MAC does.  However, the
crypto_shash Poly1305 API isn't very appropriate for this because its
calling convention assumes it is used as a MAC, with a 32-byte "one-time
key" provided for every digest.

But by design, in Adiantum hashing the performance of the polynomial
evaluation isn't nearly as critical as NH.  So it suffices to just have
some C helper functions.  Thus, this patch adds such functions.
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In preparation for exposing a low-level Poly1305 API which implements
the ε-almost-∆-universal (εA∆U) hash function underlying the Poly1305
MAC and supports block-aligned inputs only, create structures
poly1305_key and poly1305_state which hold the limbs of the Poly1305
"r" key and accumulator, respectively.

These structures could actually have the same type (e.g. poly1305_val),
but different types are preferable, to prevent misuse.
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that the 32-bit ARM NEON implementation of ChaCha20 and XChaCha20
has been refactored to support varying the number of rounds, add support
for XChaCha12.  This is identical to XChaCha20 except for the number of
rounds, which is 12 instead of 20.

XChaCha12 is faster than XChaCha20 but has a lower security margin,
though still greater than AES-256's since the best known attacks make it
through only 7 rounds.  See the patch "crypto: chacha - add XChaCha12
support" for more details about why we need XChaCha12 support.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In preparation for adding XChaCha12 support, rename/refactor the NEON
implementation of ChaCha20 to support different numbers of rounds.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add an XChaCha20 implementation that is hooked up to the ARM NEON
implementation of ChaCha20.  This is needed for use in the Adiantum
encryption mode; see the generic code patch,
"crypto: chacha20-generic - add XChaCha20 support", for more details.

We also update the NEON code to support HChaCha20 on one block, so we
can use that in XChaCha20 rather than calling the generic HChaCha20.
This required factoring the permutation out into its own macro.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

To improve responsivesess, disable preemption for each step of the walk
(which is at most PAGE_SIZE) rather than for the entire
encryption/decryption operation.
Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that the generic implementation of ChaCha20 has been refactored to
allow varying the number of rounds, add support for XChaCha12, which is
the XSalsa construction applied to ChaCha12.  ChaCha12 is one of the
three ciphers specified by the original ChaCha paper
(https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of
Salsa20"), alongside ChaCha8 and ChaCha20.  ChaCha12 is faster than
ChaCha20 but has a lower, but still large, security margin.

We need XChaCha12 support so that it can be used in the Adiantum
encryption mode, which enables disk/file encryption on low-end mobile
devices where AES-XTS is too slow as the CPUs lack AES instructions.

We'd prefer XChaCha20 (the more popular variant), but it's too slow on
some of our target devices, so at least in some cases we do need the
XChaCha12-based version.  In more detail, the problem is that Adiantum
is still much slower than we're happy with, and encryption still has a
quite noticeable effect on the feel of low-end devices.  Users and
vendors push back hard against encryption that degrades the user
experience, which always risks encryption being disabled entirely.  So
we need to choose the fastest option that gives us a solid margin of
security, and here that's XChaCha12.  The best known attack on ChaCha
breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's
security margin is still better than AES-256's.  Much has been learned
about cryptanalysis of ARX ciphers since Salsa20 was originally designed
in 2005, and it now seems we can be comfortable with a smaller number of
rounds.  The eSTREAM project also suggests the 12-round version of
Salsa20 as providing the best balance among the different variants:
combining very good performance with a "comfortable margin of security".

Note that it would be trivial to add vanilla ChaCha12 in addition to
XChaCha12.  However, it's unneeded for now and therefore is omitted.

As discussed in the patch that introduced XChaCha20 support, I
considered splitting the code into separate chacha-common, chacha20,
xchacha20, and xchacha12 modules, so that these algorithms could be
enabled/disabled independently.  However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds.  The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".

The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same.  Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.

Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx).  The generic code then passes the round count through to
chacha_block().  There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same.  I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the XChaCha20 stream cipher.  XChaCha20 is the
application of the XSalsa20 construction
(https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than
to Salsa20.  XChaCha20 extends ChaCha20's nonce length from 64 bits (or
96 bits, depending on convention) to 192 bits, while provably retaining
ChaCha20's security.  XChaCha20 uses the ChaCha20 permutation to map the
key and first 128 nonce bits to a 256-bit subkey.  Then, it does the
ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce.

We need XChaCha support in order to add support for the Adiantum
encryption mode.  Note that to meet our performance requirements, we
actually plan to primarily use the variant XChaCha12.  But we believe
it's wise to first add XChaCha20 as a baseline with a higher security
margin, in case there are any situations where it can be used.
Supporting both variants is straightforward.

Since XChaCha20's subkey differs for each request, XChaCha20 can't be a
template that wraps ChaCha20; that would require re-keying the
underlying ChaCha20 for every request, which wouldn't be thread-safe.
Instead, we make XChaCha20 its own top-level algorithm which calls the
ChaCha20 streaming implementation internally.

Similar to the existing ChaCha20 implementation, we define the IV to be
the nonce and stream position concatenated together.  This allows users
to seek to any position in the stream.

I considered splitting the code into separate chacha20-common, chacha20,
and xchacha20 modules, so that chacha20 and xchacha20 could be
enabled/disabled independently.  However, since nearly all the code is
shared anyway, I ultimately decided there would have been little benefit
to the added complexity of separate modules.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

chacha20-generic doesn't use SIMD instructions or otherwise disable
preemption, so passing atomic=true to skcipher_walk_virt() is
unnecessary.
Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Refactor the unkeyed permutation part of chacha20_block() into its own
function, then add hchacha20_block() which is the ChaCha equivalent of
HSalsa20 and is an intermediate step towards XChaCha20 (see
https://cr.yp.to/snuffle/xsalsa-20081128.pdf).  HChaCha20 skips the
final addition of the initial state, and outputs only certain words of
the state.  It should not be used for streaming directly.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect.  Many users therefore
already don't pass it, but some still do.  This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'cipher' algorithms (single block ciphers) are always synchronous, so
passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
effect.  Many users therefore already don't pass it, but some still do.
This inconsistency can cause confusion, especially since the way the
'mask' argument works is somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some algorithms initialize their .cra_list prior to registration.
But this is unnecessary since crypto_register_alg() will overwrite
.cra_list when adding the algorithm to the 'crypto_alg_list'.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignments.

Exception: paes_s390.c uses cra_list to check whether the algorithm is
registered or not, so I left that as-is for now.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unnecessary setting of CRYPTO_ALG_TYPE_SKCIPHER.
Commit 2c95e6d9 ("crypto: skcipher - remove useless setting of type
flags") took care of this everywhere else, but a few more instances made
it into the tree at about the same time.  Squash them before they get
copy+pasted around again.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ecc_point_mult is supposed to be used with a regularized scalar,
otherwise, it's possible to deduce the position of the top bit of the
scalar with timing attack. This is important when the scalar is a
private key.

ecc_point_mult is already using a regular algorithm (i.e. having an
operation flow independent of the input scalar) but regularization step
is not implemented.

Arrange scalar to always have fixed top bit by adding a multiple of the
curve order (n).

References:
The constant time regularization step is based on micro-ecc by Kenneth
MacKay and also referenced in the literature (Bernstein, D. J., & Lange,
T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology
ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.)
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Cc: kernel-hardening@lists.openwall.com
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This variant builds upon the idea of the 2-block AVX2 variant that
shuffles words after each round. The shuffling has a rather high latency,
so the arithmetic units are not optimally used.

Given that we have plenty of registers in AVX, this version parallelizes
the 2-block variant to do four blocks. While the first two blocks are
shuffling, the CPU can do the XORing on the second two blocks and
vice-versa, which makes this version much faster than the SSSE3 variant
for four blocks. The latter is now mostly for systems that do not have
AVX2, but there it is the work-horse, so we keep it in place.

The partial XORing function trailer is very similar to the AVX2 2-block
variant. While it could be shared, that code segment is rather short;
profiling is also easier with the trailer integrated, so we keep it per
function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This variant uses the same principle as the single block SSSE3 variant
by shuffling the state matrix after each round. With the wider AVX
registers, we can do two blocks in parallel, though.

This function can increase performance and efficiency significantly for
lengths that would otherwise require a 4-block function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that all block functions support partial lengths, engage the wider
block sizes more aggressively. This prevents using smaller block
functions multiple times, where the next larger block function would
have been faster.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the eight block function for AVX2, so the
block function may XOR only a partial length of eight blocks.

To avoid unnecessary operations, we integrate XORing of the first four
blocks in the final lane interleaving; this also avoids some work in
the partial lengths path.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the quad block function for SSSE3, so the
block function may XOR only a partial length of four blocks.

As we already have the stack set up, the partial XORing does not need
to. This gives a slightly different function trailer, so we keep that
separate from the 1-block function.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a length argument to the single block function for SSSE3, so the
block function may XOR only a partial length of the full block. Given
that the setup code is rather cheap, the function does not process more
than one block; this allows us to keep the block function selection in
the C glue code.

The required branching does not negatively affect performance for full
block sizes. The partial XORing uses simple "rep movsb" to copy the
data before and after doing XOR in SSE. This is rather efficient on
modern processors; movsw can be slightly faster, but the additional
complexity is probably not worth it.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adopt the SPDX license identifier headers to ease license compliance
management. While we are at this fix the comment style, too.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NEric Anholt <eric@anholt.net>
Acked-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Trivial fix to clean up an indentation issue
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: NCristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move CHACHAPOLY_IV_SIZE to header file, so it can be reused.
Signed-off-by: NCristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for ChaCha20 skcipher algorithm.
Signed-off-by: NCarmen Iorga <carmen.iorga@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Era 10 changes the register map.

The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On 6ull and 6sll the DCP block has a clock which needs to be explicitly
enabled.

Add minimal handling for this at probe/remove time.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Explicit clock enabling is required on 6sll and 6ull so mention that
standard clock bindings are used.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add testmgr and tcrypt tests and vectors for Streebog hash function
from RFC 6986 and GOST R 34.11-2012, for HMAC-Streebog vectors are
from RFC 7836 and R 50.1.113-2016.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Register Streebog hash function in Hash Info arrays to let IMA use
it for its purposes.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Reviewed-by: NMimi Zohar <zohar@linux.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add GOST/IETF Streebog hash function (GOST R 34.11-2012, RFC 6986)
generic hash transformation.

Cc: linux-integrity@vger.kernel.org
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove asm/hwcap.h which is included more than once
Signed-off-by: NBrajeswar Ghosh <brajeswar.linux@gmail.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove setkey() callback handler for normal/non key
hash algorithms and keep it for AES-CBC/CMAC which needs key.

Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: NRaveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

cts(cbc(aes)) as used in the kernel has been added to NIST
standard as CBC-CS3. Document it as such.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Suggested-by: NStephan Mueller <smueller@chronox.de>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently used scalar multiplication algorithm (Matthieu Rivain, 2011)
have invalid values for scalar == 1, n-1, and for regularized version
n-2, which was previously not checked. Verify that they are not used as
private keys.
Signed-off-by: NVitaly Chikunov <vt@altlinux.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As per Sp800-38A addendum from Oct 2010[1], cts(cbc(aes)) is
allowed as a FIPS mode algorithm. Mark it as such.

[1] https://csrc.nist.gov/publications/detail/sp/800-38a/addendum/finalSigned-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>