Add support for GENERIC_EARLY_IOREMAP.

Let's define 16 slots of 256Kbytes each for early ioremap.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/412c7eaa6a373d8f82a3c3ee01e6a65a1a6589de.1568295907.git.christophe.leroy@c-s.fr

Modify back __set_fixmap() to using __fix_to_virt() instead
of fix_to_virt() otherwise the following happens because it
seems GCC doesn't see idx as a builtin const.

  CC      mm/early_ioremap.o
In file included from ./include/linux/kernel.h:11:0,
                 from mm/early_ioremap.c:11:
In function ‘fix_to_virt’,
    inlined from ‘__set_fixmap’ at ./arch/powerpc/include/asm/fixmap.h:87:2,
    inlined from ‘__early_ioremap’ at mm/early_ioremap.c:156:4:
./include/linux/compiler.h:350:38: error: call to ‘__compiletime_assert_32’ declared with attribute error: BUILD_BUG_ON failed: idx >= __end_of_fixed_addresses
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
                                      ^
./include/linux/compiler.h:331:4: note: in definition of macro ‘__compiletime_assert’
    prefix ## suffix();    \
    ^
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
  ^
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
  BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
  ^
./include/asm-generic/fixmap.h:32:2: note: in expansion of macro ‘BUILD_BUG_ON’
  BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
  ^
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4cfac2f9 ("powerpc/mm: Simplify __set_fixmap()")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f4984c615f90caa3277775a68849afeea846850d.1568295907.git.christophe.leroy@c-s.fr

Since commit f86ef74e ("powerpc/8xx: Fix vaddr for IMMR early
remap"), the IMMR area has been mapped at startup with fixmap.

Use that fixmap directly instead of calling ioremap(), this
avoids calling ioremap() early before the slab is available.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f816ccdbd15b97cf43c5a8c7cc8dfa8db58ff036.1568294935.git.christophe.leroy@c-s.fr

Functions cpm1_clk_setup(), cpm1_set_pin(), cpm_pic_init() and
mpc8xx_pic_init() are only called from __init functions, so mark
them __init as well.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c27168ef054f3a52edcf0ff91652700d53b3e32d.1568294563.git.christophe.leroy@c-s.fr

SET_MSR_EE() is just use in this file and doesn't provide
any added value compared to mtmsr(). Drop it.

Add a wrtee() inline function to use wrtee/wrteei insn.

Replace #ifdefs by IS_ENABLED()
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a28a20514d5f6df9629c1a117b667e48c4272736.1567068137.git.christophe.leroy@c-s.fr

Most 8xx registers have specific names, so just include
reg_8xx.h all the time in reg.h in order to have them defined
even when CONFIG_PPC_8xx is not selected. This will avoid
the need for #ifdefs in C code.

Guard SPRN_ICTRL in an #ifdef CONFIG_PPC_8xx as this register
has same name but different meaning and different spr number as
another register in the mpc7450.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dd82934ad91aab607d0eb7e626c14e6ac0d654eb.1567068137.git.christophe.leroy@c-s.fr

mftb() includes a feature fixup for CELL ppc.

Use ASM_FTR_IFSET() macro instead of opencoding the setup
of the fixup sections.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ac19713826fa55e9e7bfe3100c5a7b1712ab9526.1566999711.git.christophe.leroy@c-s.fr

Commit d2f15e09 ("powerpc/32: always populate page tables for
Abatron BDI.") wrongly sets page tables for any PPC32 for using BDI,
and does't update them after init (remove RX on init section, set
text and rodata read-only)

Only the 8xx requires page tables to be populated for using the BDI.
They also need to be populated in order to see the mappings in
/sys/kernel/debug/kernel_page_tables

On BOOK3S_32, pages that are not mapped by page tables are mapped
by BATs. The BDI knows BATs and they can be viewed in
/sys/kernel/debug/powerpc/block_address_translation

Only set pagetables for RAM and IMMR on the 8xx and properly update
them at the end of init.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c8610942203e0d93fcb02ad20c57edd3adb4c9d3.1566554029.git.christophe.leroy@c-s.fr

DSISR (or ESR on some CPUs) has a bit to tell if the fault is due to a
read or a write.

Display it.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NSantosh Sivaraj <santosh@fossix.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4f88d7e6fda53b5f80a71040ab400242f6c8cb93.1566400889.git.christophe.leroy@c-s.fr

powerpc always selects CONFIG_MMU and CONFIG_MMU is not checked
anywhere else in powerpc code.

Drop the #ifdef and the alternative part of is_ioremap_addr()

Fixes: 9bd3bb67 ("mm/nvdimm: add is_ioremap_addr and use that to check ioremap address")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/de395e444fb8dd7a6365c3314d78e15ebb3d7d1b.1566382245.git.christophe.leroy@c-s.fr

BUG(), WARN() and friends are using a similar inline assembly to
implement various traps with various flags.

Lets refactor via a new BUG_ENTRY() macro.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c19a82b37677ace0eebb0dc8c2120373c29c8dd1.1566219503.git.christophe.leroy@c-s.fr

Merge changes from Scott:
  Includes a couple of device tree fixes, a spelling fix, and leftover
  code cleanup.

This removes the warnings about the fact that the 4 pci bridges (i.e.
the 4 pci hosts) don't have any ranges.
Signed-off-by: NValentin Longchamp <valentin@longchamp.me>
Signed-off-by: NScott Wood <oss@buserror.net>

Caching dates is never a good idea ;-)

Fixes: e7affb1d ("powerpc/cache: add cache flush operation for various e500")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NScott Wood <oss@buserror.net>

Since commit 302c059f (QE: use subsys_initcall to init qe),
mpc85xx_qe_init() has done nothing apart from possibly emitting a
pr_err(). As part of reducing the amount of QE-related code in
arch/powerpc/ (and eventually support QE on other architectures),
remove this low-hanging fruit.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NScott Wood <oss@buserror.net>

Change all phy-connection-type properties to phy-mode that are better
supported by the fman driver.

Use the more readable fixed-link node for the 2 sgmii links.

Change the RGMII link to rgmii-id as the clock delays are added by the
phy.
Signed-off-by: NValentin Longchamp <valentin@longchamp.me>
Acked-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>

On older distributions like Sles12SP5 gcc does not recognize
-no-pie option making the powerpc selftests build to fail

Fixes the following:
gcc: error: unrecognized command line option ‘-no-pie’
Signed-off-by: NHarish <harish@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191113094219.14946-1-harish@linux.ibm.com

This is a slight rebase of Scott's next branch, which contained the
KASLR support for book3e 32-bit, to squash in a couple of small fixes.

See the	original pull request:
  https://lore.kernel.org/r/20191022232155.GA26174@home.buserror.net

Add document to explain how we implement KASLR for fsl_booke32.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NScott Wood <oss@buserror.net>
[mpe: Add it to the index as well]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Like all other architectures such as x86 or arm64, include KASLR offset
in VMCOREINFO ELF notes to assist in debugging. After this, we can use
crash --kaslr option to parse vmcore generated from a kaslr kernel.

Note: The crash tool needs to support --kaslr too.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When kaslr is enabled, the kernel offset is different for every boot.
This brings some difficult to debug the kernel. Dump out the kernel
offset when panic so that we can easily debug the kernel.

This code is derived from x86/arm64 which has similar functionality.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

One may want to disable kaslr when boot, so provide a cmdline parameter
'nokaslr' to support this.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The original kernel still exists in the memory, clear it now.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

After we have the basic support of relocate the kernel in some
appropriate place, we can start to randomize the offset now.

Entropy is derived from the banner and timer, which will change every
build and boot. This not so much safe so additionally the bootloader may
pass entropy via the /chosen/kaslr-seed node in device tree.

We will use the first 512M of the low memory to randomize the kernel
image. The memory will be split in 64M zones. We will use the lower 8
bit of the entropy to decide the index of the 64M zone. Then we chose a
16K aligned offset inside the 64M zone to put the kernel in.

We also check if we will overlap with some areas like the dtb area, the
initrd area or the crashkernel area. If we cannot find a proper area,
kaslr will be disabled and boot from the original kernel.

Some pieces of code are derived from arch/x86/boot/compressed/kaslr.c or
arch/arm64/kernel/kaslr.c such as rotate_xor(). Credit goes to Kees and
Ard.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch add support to boot kernel from places other than KERNELBASE.
Since CONFIG_RELOCATABLE has already supported, what we need to do is
map or copy kernel to a proper place and relocate. Freescale Book-E
parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
entries are not suitable to map the kernel directly in a randomized
region, so we chose to copy the kernel to a proper place and restart to
relocate.

The offset of the kernel was not randomized yet(a fixed 64M is set). We
will randomize it in the next patch.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NScott Wood <oss@buserror.net>
[mpe: Use PTRRELOC() in early_init()]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a new helper reloc_kernel_entry() to jump back to the start of the
new kernel. After we put the new kernel in a randomized place we can use
this new helper to enter the kernel and begin to relocate again.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a new helper create_kaslr_tlb_entry() to create a tlb entry by the
virtual and physical address. This is a preparation to support boot kernel
at a randomized address.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now the kernel base is a fixed value - KERNELBASE. To support KASLR, we
need a variable to store the kernel base.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These two variables are both defined in init_32.c and init_64.c. Move
them to init-common.c and make them __ro_after_init.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

M_IF_NEEDED is defined too many times. Move it to a common place and
rename it to MAS2_M_IF_NEEDED which is much readable.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Tested-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently it is not possible to distinguish the case when fadump is
supported by firmware and disabled in kernel and completely unsupported
using the kernel sysfs interface. User can investigate the devicetree
but it is more reasonable to provide sysfs files in case we get some
fadumpv2 in the future.

With this patch sysfs files are available whenever fadump is supported
by firmware.

There is duplicate message about lack of support by firmware in
fadump_reserve_mem and setup_fadump. Remove the duplicate message in
setup_fadump.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Reviewed-by: NHari Bathini <hbathini@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191107164757.15140-1-msuchanek@suse.de

Since commit ed1cd6de ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK")
current_is_64bit() is quivalent to !is_32bit_task().
Remove the redundant function.
Suggested-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190912194633.12045-1-msuchanek@suse.de

Currently when an EEH error is detected, the system log receives the
same (or almost the same) message twice:

  EEH: PHB#0 failure detected, location: N/A
  EEH: PHB#0 failure detected, location: N/A
or
  EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected
  EEH: Frozen PHB#0-PE#0 detected

This looks like a bug, but in fact the messages are from different
functions and mean slightly different things.  So keep both but change
one of the messages slightly, so that it's clear they are different:

  EEH: PHB#0 failure detected, location: N/A
  EEH: Recovering PHB#0, location: N/A
or
  EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected
  EEH: Recovering PHB#0-PE#0
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/43817cb6e6631b0828b9a6e266f60d1f8ca8eb22.1571288375.git.sbobroff@linux.ibm.com

Changes the return variable to bool (as the return value) and
avoids doing a ternary operation before returning.
Signed-off-by: NLeonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802133914.30413-1-leonardo@linux.ibm.com

The powerpc version of dma-mapping.h only contains a version of
get_arch_dma_ops that always return NULL.  Replace it with the
asm-generic version that does the same.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190807150752.17894-1-hch@lst.de

When the machine crash handler is invoked, all interrupts are masked
but interrupts which have not been started yet do not have an ESB page
mapped in the Linux address space. This crashes the 'crash kexec'
sequence on sPAPR guests.

To fix, force the mapping of the ESB page when an interrupt is being
mapped in the Linux IRQ number space. This is done by setting the
initial state of the interrupt to OFF which is not necessarily the
case on PowerNV.

Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031063100.3864-1-clg@kaod.org

It's KUAP, not KAUP. Fix typo in INT_COMMON macro.
Signed-off-by: NAndrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022060603.24101-1-ajd@linux.ibm.com

The FSF does not reside in "675 Mass Ave, Cambridge" anymore...
let's simply use proper SPDX identifiers instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Acked-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828060737.32531-1-thuth@redhat.com

Avoids confusion when printing Oops message like below

 Faulting instruction address: 0xc00000000008bdb4
 Oops: Kernel access of bad area, sig: 11 [#1]
 LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV

This was because we never clear the MMU_FTR_HPTE_TABLE feature flag
even if we run with radix translation. It was discussed that we should
look at this feature flag as an indication of the capability to run
hash translation and we should not clear the flag even if we run in
radix translation. All the code paths check for radix_enabled() check and
if found true consider we are running with radix translation. Follow the
same sequence for finding the MMU translation string to be used in Oops
message.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711145814.17970-1-aneesh.kumar@linux.ibm.com

arch/powerpc/platforms/cell/spufs/inode.c:201:22:
 warning: variable ctx set but not used [-Wunused-but-set-variable]

It is not used since commit 67cba9fd ("move
spu_forget() into spufs_rmdir()")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191023134423.15052-1-yuehaibing@huawei.com