- 11 6月, 2009 11 次提交
-
-
由 Russell King 提交于
-
由 wanzongshun 提交于
Add default configure file for w90p910 platform. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 wanzongshun 提交于
Add clock api for w90p910 platform. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 wanzongshun 提交于
Add gpio api for w90p910 platform. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 wanzongshun 提交于
Add multi-function pin api for w90p910 platform. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
-
由 Russell King 提交于
-
由 Russell King 提交于
-
由 Linus Walleij 提交于
This adds a driver for the ARM PL022 PrimeCell SSP/SPI driver found in the U300 platforms as well as in some ARM reference hardware, and in a modified version on the Nomadik board. Reviewed-by: NAlessandro Rubini <rubini-list@gnudd.com> Reviewed-by: NRussell King <linux@arm.linux.org.uk> Reviewed-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 6月, 2009 25 次提交
-
-
由 Santosh Shilimkar 提交于
This patch updates omap_4430sdp_defconfig to add SMP and LOCAL_TIMER support for OMAP4430 SDP platform. Additionally the defconfig is made in sync with 2.6.30-rc7 Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Santosh Shilimkar 提交于
This patch enables SMP on OMAP4430 SDP platform. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Santosh Shilimkar 提交于
This patch adds SMP platform specific parts for local(mpu) timer support for OMAP4430 platform. Each Cortex-a9 core has it's own local timer in the MPU domain. These timers are not in wakeup domain. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Santosh Shilimkar 提交于
This patch adds SMP platform files support for OMAP4430SDP. TI's OMAP4430 SOC is based on ARM Cortex-A9 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
Always creating the physical mapping should do no harm, so let's remove the interface that was provided for its optional creation and make the mapping static. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
We don't have to define resources to the minimal physical window size as setup_cpu_win() will cope with smaller sizes already. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
The security accelerator which can act as a puppet player for the crypto engine requires its commands in the sram. This patch adds support for the phys mapping and creates a platform device for the actual driver. [ nico: renamed device name from "mv,orion5x-crypto" to "mv_crypto" so to match the module name and be more generic for Kirkwood use ] Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Imre Kaloz 提交于
This patch adds support for the switch found on the Netgear WNR854T router. Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Thomas Reitmayr 提交于
The Kirkwood architecture uses the same watchdog device as the Orion architecture. This patch adds orion5x_wdt as a platform device for Kirkwood. Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at> Tested-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Thomas Reitmayr 提交于
The name of the define for the Reset-Out-Mask register as well as its bit for the watchdog reset are changed to match the names used for Kirkwood (which in turn match the processor specification more closely). There is no functional change. This patch prepares for adding orion5x_wdt as a platform device to Kirkwood. Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Rabeeh Khoury 提交于
To save power: 1. Enabling clock gating of unused peripherals 2. PLL and PHY of the units are also disabled (when possible. Signed-off-by: NRabeeh Khoury <rabeeh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
Common resource and platform device structures are moved to common.c and only the partition table and chip delay remains a per board parameter. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Erik Benada 提交于
Signed-off-by: NErik Benada <erikbenada@yahoo.ca> [ nico: fix locking, additional cleanups ] Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
Just like commit 1419468a, let's save some TLB entries by making ioremap() return pointers into the boot-time Kirkwood peripheral iotable mapping whenever someone tries to ioremap any part of the Kirkwood peripheral register space. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Siddarth Gore 提交于
Signed-off-by: NSiddarth Gore <gores@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Nicolas Pitre 提交于
With a TCLK = 200MHz, the half period of the hardware timer is roughly 10 seconds. Because cnt32_to_63() must be called at least once per half period of the base hardware counter, it is a bit risky to rely solely on scheduling to generate frequent enough calls. Let's use a kernel timer to ensure this. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Stefan Agner 提交于
sched_clock implementation for orion platform. Its realized using free-running clocksource timer, which provides a resolution of 7.5ns (depending on tclk). It's derived from PXA's sched_clock implementation. [ nico: renamed orion2ns to tclk2ns, fixed max value in the comment ] Signed-off-by: NStefan Agner <stefan.agner@yahoo.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Rabeeh Khoury 提交于
The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: NRabeeh Khoury <rabeeh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Martin Fuzzey 提交于
* Use correct clkdev style usb clock name * Implement rate setting for USB clock * Introduce _clk_generic_round_rate to factorize the (now 3) uses of rounding code. Signed-off-by: NMartin Fuzzey <mfuzzey@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 05 6月, 2009 3 次提交
-
-
由 Simon POLETTE 提交于
Hi, Fixed issue in the mxc-master head : Signed-off-by: NSimon POLETTE <spolette@adnlysd018.(none)> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Tony Lindgren 提交于
This can be used for other arm platforms too as discussed on the linux-arm-kernel list. Also check the return value with IS_ERR and return PTR_ERR as suggested by Russell King. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Alessandro Rubini 提交于
The Nomadik 8815 SoC has a slightly modified version of the PL011 block. The patch uses the different ID value as a key to select a vendor structure that is used to keep track of the differences, as suggested by Russell King. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 6月, 2009 1 次提交
-
-
由 Daniel Schaeffer 提交于
Sascha Hauer wrote: > On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote: >> Add basic support for the Logic i.MX27LITE board. >> >> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com> > > Besides the comment made by Fabio this looks ok to me. > > Sascha > > Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head. Signed-off-by: NDaniel Schaeffer <daniel.schaeffer@timesys.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-