stable inclusion
from stable-v5.10.134
commit dd7b5ba44b67566ffde286f60a2f684a56c69e0d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZVR7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dd7b5ba44b67566ffde286f60a2f684a56c69e0d

--------------------------------

[ Upstream commit f4c7d894 ]

Current stmmac driver will prepare/enable ptp_ref clock in
stmmac_init_tstamp_counter().

The stmmac_pltfr_noirq_suspend will disable it once in suspend flow.

But in resume flow,
	stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter
	stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter
ptp_ref clock reference counter increases twice, which leads to unbalance
ptp clock when resume back.

Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it.

Fixes: 0735e639 ("net: stmmac: skip only stmmac_ptp_register when resume from suspend")
Signed-off-by: NBiao Huang <biao.huang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.134
commit 11038fa781ab916535c53351537b22d6d405667d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZVR7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=11038fa781ab916535c53351537b22d6d405667d

--------------------------------

[ Upstream commit 7bf9e18d ]

While reading sysctl_ip_fwd_update_priority, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 432e05d3 ("net: ipv4: Control SKB reprioritization after forwarding")
Signed-off-by: NKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.134
commit 77836dbe35382aaf8108489060c5c89530c77494
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZVR7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=77836dbe35382aaf8108489060c5c89530c77494

--------------------------------

[ Upstream commit 7c1ddcee ]

The initially merged version of the igc driver code (via commit
146740f9, "igc: Add support for PF") contained the following
IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors:

	u32 igc_rd32(struct igc_hw *hw, u32 reg)
	{
		u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
		u32 value = 0;

		if (IGC_REMOVED(hw_addr))
			return ~value;

		value = readl(&hw_addr[reg]);

		/* reads should not return all F's */
		if (!(~value) && (!reg || !(~readl(hw_addr))))
			hw->hw_addr = NULL;

		return value;
	}

And:

	#define wr32(reg, val) \
	do { \
		u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
		if (!IGC_REMOVED(hw_addr)) \
			writel((val), &hw_addr[(reg)]); \
	} while (0)

E.g. igb has similar checks in its MMIO accessors, and has a similar
macro E1000_REMOVED, which is implemented as follows:

	#define E1000_REMOVED(h) unlikely(!(h))

These checks serve to detect and take note of an 0xffffffff MMIO read
return from the device, which can be caused by a PCIe link flap or some
other kind of PCI bus error, and to avoid performing MMIO reads and
writes from that point onwards.

However, the IGC_REMOVED macro was not originally implemented:

	#ifndef IGC_REMOVED
	#define IGC_REMOVED(a) (0)
	#endif /* IGC_REMOVED */

This led to the IGC_REMOVED logic to be removed entirely in a
subsequent commit (commit 3c215fb1, "igc: remove IGC_REMOVED
function"), with the rationale that such checks matter only for
virtualization and that igc does not support virtualization -- but a
PCIe device can become detached even without virtualization being in
use, and without proper checks, a PCIe bus error affecting an igc
adapter will lead to various NULL pointer dereferences, as the first
access after the error will set hw->hw_addr to NULL, and subsequent
accesses will blindly dereference this now-NULL pointer.

This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and
implements IGC_REMOVED the way it is done for igb, by checking for the
unlikely() case of hw_addr being NULL.  This change prevents the oopses
seen when a PCIe link flap occurs on an igc adapter.

Fixes: 146740f9 ("igc: Add support for PF")
Signed-off-by: NLennert Buytenhek <buytenh@arista.com>
Tested-by: NNaama Meir <naamax.meir@linux.intel.com>
Acked-by: NSasha Neftin <sasha.neftin@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.134
commit 426336de3557b5b7290399425b5ca142e635a777
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZVR7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=426336de3557b5b7290399425b5ca142e635a777

--------------------------------

commit e5ec6a25 upstream.

mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit 747c1430 ("ip: fix dflt addr
selection for connected nexthop").

Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().

Cc: stable@vger.kernel.org
Fixes: 747c1430 ("ip: fix dflt addr selection for connected nexthop")
Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NAmit Cohen <amcohen@nvidia.com>
Reviewed-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.153
commit 6cc0e2afc6a137d45b9523f61a1b1b16a68c9dc0
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5W7B1
CVE: CVE-2022-3542

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.153&id=6cc0e2afc6a137d45b9523f61a1b1b16a68c9dc0

--------------------------------

[ Upstream commit b43f9acb ]

bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.

We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.

Fixes: 07b0f009 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: NJianglei Nie <niejianglei2021@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NRen Zhijie <renzhijie2@huawei.com>
Reviewed-by: NZhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

Adds ROH reset support for HNS3 ethernet driver.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

Add HCLGE_RAS_REG_ROH_ERR_MASK to support the error
recovery of the ROH ras. Add HCLGE_RAS_REG_ERR_MASK
to define the combination of the nfe_mask, the
rocee_err_mask and the roh_err_mask.

Add new module error types for ROH, adjust the order
of these types according to the design of firmware.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

In ROH mode, MAC address is related to the EID. If an
invalid MAC address is set, the mapping between MAC and
EID cannot be ensured, and communication may be abnormal.
Therefore, firmware verification is required to intercept
invalid MAC address set by user.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

HNAE3 framework add MAC type definitions for NIC or RoCE or ROH clients.

There are two types of MAC in Hip09, ethernet and ROH. In ROH
type, some operations are different, such as setting MAC address.
This type will be used as the judgment condition in subsequent
patches.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

driver inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WKYW

-----------------------------------------------------------------------

HNAE3 framework supports ROH clients to register with HNAE3
devices and their associated operations.

The ROH driver works as a client at the HNAE layer. The NIC
driver needs to provide some necessary information, such as
the vector base address, and suppor the registration of the
ROH client.

This patch also supports roh device IDs in the hns3 and hclge
modules.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NKe Chen <chenke54@huawei.com>
Reviewed-by: NGang Zhang <gang.zhang@huawei.com>
Reviewed-by: NYefeng Yan <yanyefeng@huawei.com>
Reviewed-by: NJingchao Dai <daijingchao1@huawei.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>

mainline inclusion
from mainline-v6.0-rc7
commit 0152dfee
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5W7AX
CVE: CVE-2022-3535

--------------------------------

When mvpp2 is unloaded, the driver specific debugfs directory is not
removed, which technically leads to a memory leak. However, this
directory is only created when the first device is probed, so the
hardware is present. Removing the module is only something a developer
would to when e.g. testing out changes, so the module would be
reloaded. So this memory leak is minor.

The original attempt in commit fe2c9c61 ("net: mvpp2: debugfs: fix
memory leak when using debugfs_lookup()") that was labelled as a memory
leak fix was not, it fixed a refcount leak, but in doing so created a
problem when the module is reloaded - the directory already exists, but
mvpp2_root is NULL, so we lose all debugfs entries. This fix has been
reverted.

This is the alternative fix, where we remove the offending directory
whenever the driver is unloaded.

Fixes: 21da57a2 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NMarcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Reviewed-by: Nzhangqiao <zhangqiao22@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.132
commit c2978d0124f26e453ed30fda6a37f62d8c7f19cb
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c2978d0124f26e453ed30fda6a37f62d8c7f19cb

--------------------------------

[ Upstream commit 2e15c51f ]

aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.

Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110

Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: NChia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit 38e081ee06cb5892d1bb9a4565518485d435bbd1
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=38e081ee06cb5892d1bb9a4565518485d435bbd1

--------------------------------

[ Upstream commit 0f332507 ]

Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
So, we could remove deep parameter on suspend/resume functions without
any functional change.

Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: NChia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-1-acelan.kao@canonical.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit b82e4ad58a7fb72456503958a93060f87896e629
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b82e4ad58a7fb72456503958a93060f87896e629

--------------------------------

[ Upstream commit ada74c55 ]

When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
  BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
 kernel BUG at mm/vmalloc.c:2727!
 invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...

Fixes: d7788196 ("sfc: DMA the VF stats only when requested")
Reported-by: NMa Yuying <yuma@redhat.com>
Signed-off-by: NÍñigo Huguet <ihuguet@redhat.com>
Acked-by: NEdward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit c2240500817b3b4b996cdf2a461a3a5679f49b94
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c2240500817b3b4b996cdf2a461a3a5679f49b94

--------------------------------

[ Upstream commit ebe41da5 ]

Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.

Set the pointer to NULL at release time to not trying to read it later.

Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs

 BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]

 Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
  efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
  efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k

 allocated by task 6771 on cpu 10 at 3137.860196s:
  pci_alloc_dev+0x21/0x60
  pci_iov_add_virtfn+0x2a2/0x320
  sriov_enable+0x212/0x3e0
  efx_ef10_sriov_configure+0x67/0x80 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xba/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 freed by task 6771 on cpu 12 at 3170.991309s:
  device_release+0x34/0x90
  kobject_cleanup+0x3a/0x130
  pci_iov_remove_virtfn+0xd9/0x120
  sriov_disable+0x30/0xe0
  efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
  efx_pci_sriov_configure+0x24/0x40 [sfc]
  sriov_numvfs_store+0xfe/0x140
  kernfs_fop_write_iter+0x11c/0x1b0
  new_sync_write+0x11f/0x1b0
  vfs_write+0x1eb/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x5c/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 3c5eb876 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: NYanghang Liu <yanghliu@redhat.com>
Signed-off-by: NÍñigo Huguet <ihuguet@redhat.com>
Acked-by: NMartin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit 29c6a632f8193b0a4b40156afb823371d1d4c05a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=29c6a632f8193b0a4b40156afb823371d1d4c05a

--------------------------------

[ Upstream commit 49b9f431 ]

In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.

Fixes: 39bfab88 ("net: ftgmac100: Add support for DT phy-handle property")
Signed-off-by: NLiang He <windhl@126.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit 9cc8edc571b871d974b3289868553f9ce544aba6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9cc8edc571b871d974b3289868553f9ce544aba6

--------------------------------

[ Upstream commit 029c1c20 ]

There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.

[0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit 4cb5c1950b7ad37f57ced2bea8c5b4bcb755b61a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4cb5c1950b7ad37f57ced2bea8c5b4bcb755b61a

--------------------------------

[ Upstream commit 452133dd ]

The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.

Fixes: 0cfafd4b ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: NGal Pressman <gal@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit 6eb1d0c370afbfb717824ba148e67243c85cfa72
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6eb1d0c370afbfb717824ba148e67243c85cfa72

--------------------------------

[ Upstream commit 2ec6cf9b ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison
against the size of the private RX TLS driver context.

Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.132
commit c87d5211be84e682b9d0ae781368446acf4f2639
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YS3T

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c87d5211be84e682b9d0ae781368446acf4f2639

--------------------------------

[ Upstream commit 6cc2714e ]

Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.

Fixes: df8d8667 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.130
commit 26938bd28c0c1d177e85db83659766968a8a59d9
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YRJO

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=26938bd28c0c1d177e85db83659766968a8a59d9

--------------------------------

[ Upstream commit faa4e04e ]

66e4c8d9 ("net: warn if transport header was not set") added
a check that triggers a warning in r8169, see [0].

The commit referenced in the Fixes tag refers to the change from
which the patch applies cleanly, there's nothing wrong with this
commit. It seems the actual issue (not bug, because the warning
is harmless here) was introduced with bdfa4ed6
("r8169: use Giant Send").

[0] https://bugzilla.kernel.org/show_bug.cgi?id=216157

Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug")
Reported-by: NErhard F. <erhard_f@mailbox.org>
Tested-by: NErhard F. <erhard_f@mailbox.org>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.130
commit 23cdc57d88d14d76f2bf0c9d747ef2508858d7e5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YRJO

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=23cdc57d88d14d76f2bf0c9d747ef2508858d7e5

--------------------------------

[ Upstream commit 1b18f09d ]

During a reset, there may have been transmits in flight that are no
longer valid and cannot be fulfilled.  Resetting and clearing the
queues is insufficient; each skb also needs to be explicitly freed
so that upper levels are not left waiting for confirmation of a
transmit that will never happen.  If this happens frequently enough,
the apparent backlog will cause TCP to begin "congestion control"
unnecessarily, culminating in permanently decreased throughput.

Fixes: d7c0ef36 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change")
Tested-by: NNick Child <nnac123@linux.ibm.com>
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NRick Lindsley <ricklind@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.130
commit 2b4659c145bafe3cdaf2a2cde08fd34b7ecbbba5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YRJO

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2b4659c145bafe3cdaf2a2cde08fd34b7ecbbba5

--------------------------------

[ Upstream commit 1adb1563 ]

Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.

Fix it by reading GL_RXERR1 register for each interface.

Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"

Fixes: 41a9e55c ("i40e: add missing VSI statistics")
Signed-off-by: NLukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.129
commit b8def021ac7086202f26fdce55471db4794ec76f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YNDQ

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b8def021ac7086202f26fdce55471db4794ec76f

--------------------------------

commit 8ee9d82c upstream.

epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one()
we already freed the dma buffer. To fix this issue, reorder function calls
like in the .probe function.

BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100]
Call Trace:
 epic_rx+0xa6/0x7e0 [epic100]
 epic_close+0xec/0x2f0 [epic100]
 unregister_netdev+0x18/0x20
 epic_remove_one+0xaa/0xf0 [epic100]

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: NYilun Wu <yiluwu@cs.stonybrook.edu>
Signed-off-by: NTong Zhang <ztong0001@gmail.com>
Reviewed-by: NFrancois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.128
commit 2d10984d99ac2b652b4f31efd2e059957f1fa51f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5YM2H

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2d10984d99ac2b652b4f31efd2e059957f1fa51f

--------------------------------

Flooding of unregistered IP multicast has been broken (both to other
switch ports and to the CPU) since the ocelot driver introduction, and
up until commit 4cf35a2b ("net: mscc: ocelot: fix broken IP
multicast flooding"), a bug fix for commit 421741ea ("net: mscc:
ocelot: offload bridge port flags to device") from v5.12.

The driver used to set PGID_MCIPV4 and PGID_MCIPV6 to the empty port
mask (0), which made unregistered IPv4/IPv6 multicast go nowhere, and
without ever modifying that port mask at runtime.

The expectation is that such packets are treated as broadcast, and
flooded according to the forwarding domain (to the CPU if the port is
standalone, or to the CPU and other bridged ports, if under a bridge).

Since the aforementioned commit, the limitation has been lifted by
responding to SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events emitted by the
bridge. As for host flooding, DSA synthesizes another call to
ocelot_port_bridge_flags() on the NPI port which ensures that the CPU
gets the unregistered multicast traffic it might need, for example for
smcroute to work between standalone ports.

But between v4.18 and v5.12, IP multicast flooding has remained unfixed.

Delete the inexplicable premature optimization of clearing PGID_MCIPV4
and PGID_MCIPV6 as part of the init sequence, and allow unregistered IP
multicast to be flooded freely according to the forwarding domain
established by PGID_SRC, by explicitly programming PGID_MCIPV4 and
PGID_MCIPV6 towards all physical ports plus the CPU port module.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Cc: stable@kernel.org
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

mainline inclusion
from mainline-v6.0-rc1
commit 02e1a114
category: bugfix
bugzilla: 187867, https://gitee.com/src-openeuler/kernel/issues/I5W7B5
CVE: CVE-2022-3545

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git/commit/?id=02e1a114fdb71e59ee6770294166c30d437bf86a

--------------------------------

area_cache_get() is used to distribute cache->area and set cache->id,
 and if cache->id is not 0 and cache->area->kref refcount is 0, it will
 release the cache->area by nfp_cpp_area_release(). area_cache_get()
 set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
 is already set but the refcount is not increased as expected. At this
 time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
 nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
 equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
Signed-off-by: NJialiang Wang <wangjialiang0806@163.com>
Reviewed-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: NSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NYuyao Lin <linyuyao1@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.127
commit 3bccf82169c503b7baa1ee469f0098f51ca2de7b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3bccf82169c503b7baa1ee469f0098f51ca2de7b

--------------------------------

[ Upstream commit 4e0effd9 ]

Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps
Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which
will be significantly lower when 1) ASPM is disabled or 2) SoC package
c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx
speed can reach to ~950Mbps.

According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC",
"DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so
set it to 1b for "DMA is considered idle when there is no Rx or Tx AND
when there are no TLPs indicating that CPU is active detected on the
PCIe link (such as the host executes CSR or Configuration register read
or write operation)" and performing Tx should also fall under "active
CPU on PCIe link" case.

In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init
code to separate function.") seems to wrongly changed from enabling
E1000_PCIEMISC_LX_DECISION to disabling it, also fix that.

Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.")
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 40b3815b2c9027061fb74c1d21a1e9b8f486977d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40b3815b2c9027061fb74c1d21a1e9b8f486977d

--------------------------------

[ Upstream commit c3d184c8 ]

In current implementation ice_update_phy_type enables all link modes
for selected speed. This approach doesn't work for 1000M speeds,
because both copper (1000baseT) and optical (1000baseX) standards
cannot be enabled at once.

Fix this, by adding the function `ice_set_phy_type_from_speed()`
for 1000M speeds.

Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: NAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit c12a2c9b1b460ed72e6b3c33aac1ef51b0329b66
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c12a2c9b1b460ed72e6b3c33aac1ef51b0329b66

--------------------------------

[ Upstream commit 3f6a57ee ]

Fix the following use-after-free bug in igb_clean_tx_ring routine when
the NIC is running in XDP mode. The issue can be triggered redirecting
traffic into the igb NIC and then closing the device while the traffic
is flowing.

[   73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9
[   73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017
[   73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0
[   73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282
[   73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000
[   73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0
[   73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058
[   73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090
[   73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000
[   73.404806] FS:  00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000
[   73.413129] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0
[   73.426565] Call Trace:
[   73.429087]  <TASK>
[   73.431314]  igb_clean_tx_ring+0x43/0x140 [igb]
[   73.436002]  igb_down+0x1d7/0x220 [igb]
[   73.439974]  __igb_close+0x3c/0x120 [igb]
[   73.444118]  igb_xdp+0x10c/0x150 [igb]
[   73.447983]  ? igb_pci_sriov_configure+0x70/0x70 [igb]
[   73.453362]  dev_xdp_install+0xda/0x110
[   73.457371]  dev_xdp_attach+0x1da/0x550
[   73.461369]  do_setlink+0xfd0/0x10f0
[   73.465166]  ? __nla_validate_parse+0x89/0xc70
[   73.469714]  rtnl_setlink+0x11a/0x1e0
[   73.473547]  rtnetlink_rcv_msg+0x145/0x3d0
[   73.477709]  ? rtnl_calcit.isra.0+0x130/0x130
[   73.482258]  netlink_rcv_skb+0x8d/0x110
[   73.486229]  netlink_unicast+0x230/0x340
[   73.490317]  netlink_sendmsg+0x215/0x470
[   73.494395]  __sys_sendto+0x179/0x190
[   73.498268]  ? move_addr_to_user+0x37/0x70
[   73.502547]  ? __sys_getsockname+0x84/0xe0
[   73.506853]  ? netlink_setsockopt+0x1c1/0x4a0
[   73.511349]  ? __sys_setsockopt+0xc8/0x1d0
[   73.515636]  __x64_sys_sendto+0x20/0x30
[   73.519603]  do_syscall_64+0x3b/0x80
[   73.523399]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   73.528712] RIP: 0033:0x7ff38d41f20c
[   73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c
[   73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003
[   73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
[   73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0
[   73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30
[   73.596545]  </TASK>
[   73.598842] ---[ end trace 0000000000000000 ]---

Fixes: 9cbc948b ("igb: add XDP support")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit ff4443f3fc531f014a9fddaa13d036d82addfbcb
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ff4443f3fc531f014a9fddaa13d036d82addfbcb

--------------------------------

commit 1b5d73fb upstream.

Enables PCIe PTM (Precision Time Measurement) support in the igc
driver. Notifies the PCI devices that PCIe PTM should be enabled.

PCIe PTM is similar protocol to PTP (Precision Time Protocol) running
in the PCIe fabric, it allows devices to report time measurements from
their internal clocks and the correlation with the PCIe root clock.

The i225 NIC exposes some registers that expose those time
measurements, those registers will be used, in later patches, to
implement the PTP_SYS_OFFSET_PRECISE ioctl().
Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: NDvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NMeng Tang <tangmeng@uniontech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 28069e026e649683930f887b2d8f4a981b93bc41
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=28069e026e649683930f887b2d8f4a981b93bc41

--------------------------------

[ Upstream commit d7dd6ecc ]

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.

Remove the erroneous kfree() from the .remove() function.

Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 984793f255732857861571de12e38dd8ba025f48
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=984793f255732857861571de12e38dd8ba025f48

--------------------------------

[ Upstream commit 4b7a632a ]

Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: NMaksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 814092927a215f5ca6c08249ec72a205e0b473cd
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=814092927a215f5ca6c08249ec72a205e0b473cd

--------------------------------

[ Upstream commit fd5855e6 ]

After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.

Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.

Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()

Fixes: e17bc411 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb26 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: NMichal Jaron <michalx.jaron@intel.com>
Signed-off-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 43dfd1169cc07128c2dc3fecd89fc2f34bf35b15
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43dfd1169cc07128c2dc3fecd89fc2f34bf35b15

--------------------------------

[ Upstream commit 0bb05067 ]

If ADQ is enabled for a VF, then actual number of queue pair
is a number of currently available traffic classes for this VF.

Without this change the configuration of the Rx/Tx queues
fails with error.

Fixes: d29e0d23 ("i40e: missing input validation on VF message handling by the PF")
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NBharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit ef4d73da0a5c2a48db94f7585e2c4e842aed311c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ef4d73da0a5c2a48db94f7585e2c4e842aed311c

--------------------------------

[ Upstream commit c3238d36 ]

Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.

Fix checking hw_tc parameter which blocks creation of filters on TC0.

Fixes: 2f4b411a ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: NGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: NJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: NBharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 85340c06345025761f26ca2eabc2718aad41e7d7
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=85340c06345025761f26ca2eabc2718aad41e7d7

--------------------------------

[ Upstream commit 842c3b3d ]

gcc-12 started warning about 'tracker' being used uninitialized:

  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
    786 |         struct lag_tracker tracker;
        |                            ^~~~~~~

which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.

But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.

This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.124
commit 38c519df8ecf028a4d2250bad43eea1344f2fc18
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6E7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=38c519df8ecf028a4d2250bad43eea1344f2fc18

--------------------------------

[ Upstream commit 2f2c0d29 ]

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
Signed-off-by: NChen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.122
commit 2dba96d19d254cde21c145bce4f2714a9535ae29
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5W6OE

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2dba96d19d254cde21c145bce4f2714a9535ae29

--------------------------------

commit 7bb0fb7c upstream.

When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.

For instance, in this situation:

┌────────┐    ┌────────┐    ┌────────┐
│        │    │        │    │        │
│        │    │        │    │        │
│     VF0├────┤VF1  VF2├────┤VF3     │
│        │    │        │    │        │
└────────┘    └────────┘    └────────┘
   VM1           VM2           VM3

vf 0:  vlan 1000
vf 1:  vlan 1000
vf 2:  vlan 1001
vf 3:  vlan 1001

If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.

This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.

This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.

Fixes: 8443c1a4 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NOlivier Matz <olivier.matz@6wind.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.122
commit 91620cded92dda652ce5a79aa06d8e118d93e769
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5W6OE

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=91620cded92dda652ce5a79aa06d8e118d93e769

--------------------------------

commit 803e9895 upstream.

After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.

In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.

This flag is already set by default in ixgbe_set_vmolr() on VF reset.

Fixes: 8443c1a4 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NOlivier Matz <olivier.matz@6wind.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.122
commit 96bf5ed057df2d157274d4e2079002f9a9404bb8
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5W6OE

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=96bf5ed057df2d157274d4e2079002f9a9404bb8

--------------------------------

[ Upstream commit 11ec18b1 ]

Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>