By Mellanox HW design and SW implementation, poll_cq never
fails and returns errors, so all these printks are to catch ULP bugs.

In case of such bug, the reverted patch will cause reentry of the
function, resulting in a printk storm.

This reverts commit 5412352f ("IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.

The next scenario demonstrates it:
	neigh_add_path --> ipoib_cm_create_tx -->
	queue_work (pointer to path is in the cm/tx struct)
	#while the work is still in the queue,
	#the port goes down and causes the ipoib_flush_paths:
	ipoib_flush_paths --> path_free --> kfree(path)
	#at this point the work scheduled starts.
	ipoib_cm_tx_start --> copy from the (invalid)path pointer:
	(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
	 -> memory corruption.

To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.

Fixes: 839fcaba ('IPoIB: Connected mode experimental support')
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.

Additionally, this patch gets rid of group->query_id variable which is
not used.

Fixes: faec2f7b ('IB/sa: Track multicast join/leave requests')
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We get 1 warning when build kernel with W=1:
drivers/infiniband/hw/cxgb4/qp.c:686:6: warning: no previous prototype for '_free_qp' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.
so this patch marks it 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the low level driver exercises the hot unplug they would call
rdma_cm cma_remove_one which would fire DEVICE_REMOVAL event to all cma
consumers. Now, if consumer doesn't make sure they destroy all IB
objects created on that IB device instance prior to finalizing all
processing of DEVICE_REMOVAL callback, rdma_cm will let the lld to
de-register with IB core and destroy the IB device instance. And if the
consumer calls (say) ib_dereg_mr(), it will crash since that dev object
is NULL.

In the current implementation, iser-target just initiates the cleanup
and returns from DEVICE_REMOVAL callback. This deferred work creates a
race between iser-target cleaning IB objects(say MR) and lld destroying
IB device instance.

This patch includes the following fixes
  -> make sure that consumer frees all IB objects associated with device
     instance
  -> return non-zero from the callback to destroy the rdma_cm id
Signed-off-by: NRaju Rangoju <rajur@chelsio.com>
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The 2nd parameter of 'find_first_bit' is the number of bits to search.
In this case, we are passing 'sizeof(u64)' which is 8.

It is likely that the number of bits of 'port_mask' was expected here.
Use sizeof() * 8 to get the correct number.

It has been spotted by the following coccinelle script:
@@
expression ret, x;

@@
*  ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...));
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The 2nd parameter of 'find_first_bit' is the number of bits to search.
In this case, we are passing 'sizeof(tmp)' which is likely to be 4 or 8
because 'tmp' is an 'unsigned long'.

It is likely that the number of bits of 'tmp' was expected here. So use
BITS_PER_LONG instead.

It has been spotted by the following coccinelle script:
@@
expression ret, x;

@@
*  ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...));
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NMajd Dibbiny <majd@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In all other places in this file where 'find_first_bit' is called,
port_num is defined as a 'u8' and no casting is done.

Do the same here in order to be more consistent.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Device notifications are not received after the first interface is
closed; since there is an unregister for notifications on every
interface close. Correct this by unregistering for device
notifications only when the last interface is closed. Also, make
all operations on the i40iw_notifiers_registered atomic as it
can be read/modified concurrently.

Fixes: 8e06af71 ("i40iw: add main, hdr, status")
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update iwqp->hw_iwarp_state to reflect the new state of the CQP
modify QP operation. This avoids reissuing a CQP operation to
modify a QP to a state that it is already in.

Fixes: 4e9042e6 ("i40iw: add hw and utils files")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.

Fixes: f27b4746 ("i40iw: add connection management code")
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If port_guid is set with the default subnet_prefix, then we get a change
event and run a port refresh, we don't update the port_guid.  As a
result, attempts to create a target device that uses the new
subnet_prefix in the wwn will fail to find a match and be rejected by
the ib_srpt driver.  This makes it impossible to configure a port if it
was initialized with a default subnet_prefix and later changed to any
non-default subnet-prefix.  Updating the port refresh task to always
update the wwn based upon the current subnext_prefix solves this
problem.

Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: nab@linux-iscsi.org
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current driver is reporting wrong values for max_sge and
max_sge_rd in query_device. This breaks the nfs rdma and iser
in some device profiles. Fixing the driver to report
correct values from FW.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iwpbl->iwmr points to the structure that contains iwpbl,
which is iwmr. Setting this to NULL would result in
writing to freed memory. So just free iwmr, and return.

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in
the create_qp error path. Correct this by having it freed only once in
i40iw_free_qp_resources().

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This file does not use any structs or functions defined by io-mapping.h
(nor does it directly use iomap, ioremap, iounamp or friends). Remove it
to simplify verification of changes to io-mapping.h

The include existed since its inception in

commit e126ba97
Author: Eli Cohen <eli@mellanox.com>
Date:   Sun Jul 7 17:25:49 2013 +0300

    mlx5: Add driver for Mellanox Connect-IB adapters

which looks like a copy across from the Mellanox ethernet driver.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Matan Barak <matanb@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NLaurence Oberman <loberman@redhat.com>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In i40iw_free_virt_mem(), do not set mem->va to NULL
after freeing it as mem->va is a self-referencing pointer
to mem.

Fixes: 4e9042e6 ("i40iw: add hw and utils files")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add NULL check for pdata and pdata->addr before the memcpy in
i40iw_form_cm_frame(). This fixes a NULL pointer de-reference
which occurs when the MPA private data pointer is NULL. Also
only copy pdata->size bytes in the memcpy to prevent reading
past the length of the private data buffer provided by upper layer.

Fixes: f27b4746 ("i40iw: add connection management code")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for
request completion notification on a CQ. Due to this ib_poll_handler()
assumes all events polled and avoids further iopoll scheduling.

This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if
CQ is not empty and return accordingly. Based on the return value of
ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of
iopoll handler.
Signed-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In i40iw_open(), check if interface is already open
and return success if it is.

Fixes: 8e06af71 ("i40iw: add main, hdr, status")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In i40iw_alloc_resource(), ensure that the update to
req_resource_num is protected by the lock.

Fixes: 8e06af71 ("i40iw: add main, hdr, status")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iwdev->mem_resources is incorrectly defined as an unsigned
long instead of u8. As a result, the offset into the dynamic
allocated structures in i40iw_initialize_hw_resources() is
incorrectly calculated and would lead to writing of memory
regions outside of the allocated buffer.

Fixes: 8e06af71 ("i40iw: add main, hdr, status")
Reported-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

* Reuse existing functionality from memdup_user() instead of keeping
  duplicate source code.

  This issue was detected by using the Coccinelle software.

* The local variable "ret" will be set to an appropriate value a bit later.
  Thus omit the explicit initialisation at the beginning.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The i40iw initiator sends an MPA-request with ird=16 and ord=16. The cxgb4
responder sends an MPA-reply with ord = 32 causing i40iw to terminate
due to insufficient resources.

The logic to reduce the ORD to <= peer's IRD was wrong.
Reported-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The i40iw initiator sends an MPA-request with ird = 63, ord = 63. The
cxgb4 responder sends a RST.  Since the inbound ord=63 and it exceeds
the max_ird/c4iw_max_read_depth (=32 default), chelsio decides to abort.

Instead, cxgb4 should adjust the ord/ird down before presenting it to
the ULP.
Reported-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Testing with CONFIG_SLUB_DEBUG_ON=y resulted in the kernel panic below.

This is the result of the mm_struct sometimes being free'd prior to
hfi1_file_close being called.

This was due to the combination of 2 reasons:

1) hfi1_file_close is deferred in process exit and it therefore may not
   be called synchronously with process exit.
2) exit_mm is called prior to exit_files in do_exit.  Normally this is ok
   however, our kernel bypass code requires us to have access to the
   mm_struct for house keeping both at "normal" close time as well as at
   process exit.

Therefore, the fix is to simply keep a reference to the mm_struct until
we are done with it.

[ 3006.340150] general protection fault: 0000 [#1] SMP
[ 3006.346469] Modules linked in: hfi1 rdmavt rpcrdma ib_isert iscsi_target_mod
ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod
 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm
 ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod snd_hda_code
 c_realtek iTCO_wdt snd_hda_codec_generic iTCO_vendor_support sb_edac edac_core
 x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass c
 rct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw snd_hda_intel
 gf128mul snd_hda_codec glue_helper snd_hda_core ablk_helper sn
 d_hwdep cryptd snd_seq snd_seq_device snd_pcm snd_timer snd soundcore pcspkr
 shpchp mei_me sg lpc_ich mei i2c_i801 mfd_core ioatdma ipmi_devi
 ntf wmi ipmi_si ipmi_msghandler acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd
 grace sunrpc ip_tables ext4 jbd2 mbcache mlx4_en ib_core sr_mod s
 d_mod cdrom crc32c_intel mgag200 drm_kms_helper syscopyarea sysfillrect igb
 sysimgblt fb_sys_fops ptp mlx4_core ttm isci pps_core ahci drm li
 bsas libahci dca firewire_ohci i2c_algo_bit scsi_transport_sas firewire_core
 crc_itu_t i2c_core libata [last unloaded: mlx4_ib]
 [ 3006.461759] CPU: 16 PID: 11624 Comm: mpi_stress Not tainted 4.7.0-rc5+ #1
 [ 3006.469915] Hardware name: Intel Corporation W2600CR ........../W2600CR, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
 [ 3006.483027] task: ffff8804102f0040 ti: ffff8804102f8000 task.ti: ffff8804102f8000
 [ 3006.491971] RIP: 0010:[<ffffffff810f0383>]  [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0
 [ 3006.501905] RSP: 0018:ffff8804102fb908  EFLAGS: 00010002
 [ 3006.508447] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000
 [ 3006.517012] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880410b56a40
 [ 3006.525569] RBP: ffff8804102fb9b0 R08: 0000000000000001 R09: 0000000000000000
 [ 3006.534119] R10: ffff8804102f0040 R11: 0000000000000000 R12: 0000000000000000
 [ 3006.542664] R13: ffff880410b56a40 R14: 0000000000000000 R15: 0000000000000000
 [ 3006.551203] FS:  00007ff478c08700(0000) GS:ffff88042e200000(0000) knlGS:0000000000000000
 [ 3006.560814] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [ 3006.567806] CR2: 00007f667f5109e0 CR3: 0000000001c06000 CR4: 00000000000406e0
 [ 3006.576352] Stack:
 [ 3006.579157]  ffffffff8124b819 ffffffffffffffff 0000000000000000 ffff8804102fb940
 [ 3006.588072]  0000000000000002 0000000000000000 ffff8804102f0040 0000000000000007
 [ 3006.596971]  0000000000000006 ffff8803cad6f000 0000000000000000 ffff8804102f0040
 [ 3006.605878] Call Trace:
 [ 3006.609220]  [<ffffffff8124b819>] ? uncharge_batch+0x109/0x250
 [ 3006.616382]  [<ffffffff810f2313>] lock_acquire+0xd3/0x220
 [ 3006.623056]  [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1]
 [ 3006.631593]  [<ffffffff81775579>] down_write+0x49/0x80
 [ 3006.638022]  [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1]
 [ 3006.646569]  [<ffffffffa0a30bfc>] hfi1_release_user_pages+0x7c/0xa0 [hfi1]
 [ 3006.654898]  [<ffffffffa0a2efb6>] cacheless_tid_rb_remove+0x106/0x330 [hfi1]
 [ 3006.663417]  [<ffffffff810efd36>] ? mark_held_locks+0x66/0x90
 [ 3006.670498]  [<ffffffff817771f6>] ? _raw_spin_unlock_irqrestore+0x36/0x60
 [ 3006.678741]  [<ffffffffa0a2f1ee>] tid_rb_remove+0xe/0x10 [hfi1]
 [ 3006.686010]  [<ffffffffa0a0c5d5>] hfi1_mmu_rb_unregister+0xc5/0x100 [hfi1]
 [ 3006.694387]  [<ffffffffa0a2fcb9>] hfi1_user_exp_rcv_free+0x39/0x120 [hfi1]
 [ 3006.702732]  [<ffffffffa09fc6ea>] hfi1_file_close+0x17a/0x330 [hfi1]
 [ 3006.710489]  [<ffffffff81263e9a>] __fput+0xfa/0x230
 [ 3006.716595]  [<ffffffff8126400e>] ____fput+0xe/0x10
 [ 3006.722696]  [<ffffffff810b95c6>] task_work_run+0x86/0xc0
 [ 3006.729379]  [<ffffffff81099933>] do_exit+0x323/0xc40
 [ 3006.735672]  [<ffffffff8109a2dc>] do_group_exit+0x4c/0xc0
 [ 3006.742371]  [<ffffffff810a7f55>] get_signal+0x345/0x940
 [ 3006.748958]  [<ffffffff810340c7>] do_signal+0x37/0x700
 [ 3006.755328]  [<ffffffff8127872a>] ? poll_select_set_timeout+0x5a/0x90
 [ 3006.763146]  [<ffffffff811609cb>] ? __audit_syscall_exit+0x1db/0x260
 [ 3006.770853]  [<ffffffff8110f3e3>] ? rcu_read_lock_sched_held+0x93/0xa0
 [ 3006.778765]  [<ffffffff812347a4>] ? kfree+0x1e4/0x2a0
 [ 3006.784986]  [<ffffffff8108e75a>] ? exit_to_usermode_loop+0x33/0xac
 [ 3006.792551]  [<ffffffff8108e785>] exit_to_usermode_loop+0x5e/0xac
 [ 3006.799907]  [<ffffffff81003dca>] do_syscall_64+0x12a/0x190
 [ 3006.806664]  [<ffffffff81777a7f>] entry_SYSCALL64_slow_path+0x25/0x25
 [ 3006.814396] Code: 24 08 44 89 44 24 10 89 4c 24 18 e8 a8 d8 ff ff 48 85 c0
 8b 4c 24 18 44 8b 44 24 10 44 8b 4c 24 08 4c 8b 14 24 0f 84 30
 08 00 00 <f0> ff 80 98 01 00 00 8b 3d 48 ad be 01 45 8b a2 90 0b 00 00 85
 [ 3006.837158] RIP  [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0
 [ 3006.844401]  RSP <ffff8804102fb908>
 [ 3006.851170] ---[ end trace b7b9f21cf06c27df ]---
 [ 3006.927420] Kernel panic - not syncing: Fatal exception
 [ 3006.933954] Kernel Offset: disabled
 [ 3006.940961] ---[ end Kernel panic - not syncing: Fatal exception
 [ 3006.948249] ------------[ cut here ]------------

Fixes: 3faa3d9a ("IB/hfi1: Make use of mm consistent")
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The unwind logic for creating a user QP has a double vfree
of the non-shared receive queue when handling a "too many qps"
failure.

The code unwinds the mmmap info by decrementing a reference
count which will call rvt_release_mmap_info() which in turn
does the vfree() of the r_rq.wq.  The unwind code then does
the same free.

Fix by guarding the vfree() with the same test that is done
in close and only do the vfree() if qp->ip is NULL.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, J_KEY generation was based on the lower 16 bits
of the user's UID. While this works, it was not good enough
as a non-root user could collide with a root user given a
sufficiently large UID.

This patch attempt to improve the J_KEY generation by using
the following algorithm:

The 16 bit J_KEY space is partitioned into 3 separate spaces
reserved for different user classes:
   * all users with administtor privileges (including 'root')
     will use J_KEYs in the range of 0 to 31,
   * all kernel protocols, which use KDETH packets will use
     J_KEYs in the range of 32 to 63, and
   * all other users will use J_KEYs in the range of 64 to
     65535.

The above separation is aimed at preventing different user levels
from sending packets to each other and, additionally, separate
kernel protocols from all other types of users. The later is meant
to prevent the potential corruption of kernel memory by any other
type of user.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver does not check if the CableInfo query is supported for the
port type. Return early if CableInfo is not supported for the port type,
making compliance with the specification explicit and preventing lower
level code from potentially doing the wrong thing if the query is not
supported for the hardware implementation.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The Soft RoCE (rxe) is located in drivers/inifiniband/sw
and not in drivers/infiniband/hw/.

This patch fixes it.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If 'pci_register_driver' fails, we return 'err' which is known to be 0.
Return the error instead.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It is likely that checking the result of 'setup_ctxt' is expected here.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Validate the etype to insure that the header is correct.
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The "packet" parameter was being passed on the stack,
change it to a pointer.
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The monitor values from bytes 22 through 81 of the QSFP memory space
(SFF 8636) are dynamic and serving them out of the QSFP memory cache
maintained by the driver provides stale data to the CableInfo SMA query.
This patch refreshes the dynamic values from the QSFP memory on request
and overwrites the stale data from the cache for the overlap between the
requested range and the monitor range.
Reviewed-by: NJubin John <jubin.john@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The qp init function does a kzalloc() while holding the RCU
lock that encounters the following warning with a debug kernel
when a cat of the qp_stats is done:

[  231.723948] rcu_scheduler_active = 1, debug_locks = 0
[  231.731939] 3 locks held by cat/11355:
[  231.736492]  #0:  (debugfs_srcu){......}, at: [<ffffffff813001a5>] debugfs_use_file_start+0x5/0x90
[  231.746955]  #1:  (&p->lock){+.+.+.}, at: [<ffffffff81289a6c>] seq_read+0x4c/0x3c0
[  231.755873]  #2:  (rcu_read_lock){......}, at: [<ffffffffa0a0c535>] _qp_stats_seq_start+0x5/0xd0 [hfi1]
[  231.766862]

The init functions do an implicit next which requires the rcu read lock
before the kzalloc().

Fix for both drivers is to change the scope of the init function to only
do the allocation and the initialization of the just allocated iter.

The implict next is moved back into the respective start functions to fix
the issue.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
CC: <stable@vger.kernel.org> # 4.6.x-
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove duplicated include.
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>