- 26 3月, 2015 7 次提交
-
-
由 Clément Perrochaud 提交于
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: NClément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Hannes Frederic Sowa 提交于
As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
As namespaces are sometimes used with overlapping ip address ranges, we should also use the namespace as input to the hash to select the ip fragmentation counter bucket. Cc: Eric Dumazet <edumazet@google.com> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Despite recent improvements, the establishment of dual parallel links still has a small glitch where messages can bypass each other. When the second link in a dual-link configuration is established, part of the first link's traffic will be steered over to the new link. Although we do have a mechanism to ensure that packets sent before and after the establishment of the new link arrive in sequence to the destination node, this is not enough. The arriving messages will still be delivered upwards in different threads, something entailing a risk of message disordering during the transition phase. To fix this, we introduce a synchronization mechanism between the two parallel links, so that traffic arriving on the new link cannot be added to its input queue until we are guaranteed that all pre-establishment messages have been delivered on the old, parallel link. This problem seems to always have been around, but its occurrence is so rare that it has not been noticed until recent intensive testing. Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
After the recent changes in message importance handling it becomes possible to simplify handling of messages and sockets when we encounter link congestion. We merge the function tipc_link_cong() into link_schedule_user(), and simplify the code of the latter. The code should now be easier to follow, especially regarding return codes and handling of the message that caused the situation. In case the scheduling function is unable to pre-allocate a wakeup message buffer, it now returns -ENOBUFS, which is a more correct code than the previously used -EHOSTUNREACH. Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Currently, we only use a single counter; the length of the backlog queue, to determine whether a message should be accepted to the queue or not. Each time a message is being sent, the queue length is compared to a threshold value for the message's importance priority. If the queue length is beyond this threshold, the message is rejected. This algorithm implies a risk of starvation of low importance senders during very high load, because it may take a long time before the backlog queue has decreased enough to accept a lower level message. We now eliminate this risk by introducing a counter for each importance priority. When a message is sent, we check only the queue level for that particular message's priority. If that is ok, the message can be added to the backlog, irrespective of the queue level for other priorities. This way, each level is guaranteed a certain portion of the total bandwidth, and any risk of starvation is eliminated. Reviewed-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
Master change notifications may occur other than when joining or leaving a bridge, for example when being added to or removed from a bond or Open vSwitch. In that case, do nothing instead of asking the switch driver to remove a port from a bridge that it didn't join. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2015 15 次提交
-
-
由 Ying Xue 提交于
When a node joins a cluster while we are transmitting a fragment stream over the broadcast link, it's missing the preceding fragments needed to build a meaningful message. As a result, the node has to drop it. However, as the fragment message is not acknowledged to its sender before it's dropped, it accidentally causes link reset of retransmission failure on the node. Reported-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NYing Xue <ying.xue@windriver.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Tested-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Move the declaration for external variables to sctp.h file avoiding to repeatedly declare them with extern keyword. Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ss should display ipv4 mapped request sockets like this : tcp SYN-RECV 0 0 ::ffff:192.168.0.1:8080 ::ffff:192.0.2.1:35261 and not like this : tcp SYN-RECV 0 0 192.168.0.1:8080 192.0.2.1:35261 We should init ireq->ireq_family based on listener sk_family, not the actual protocol carried by SYN packet. This means we can set ireq_family in inet_reqsk_alloc() Fixes: 3f66b083 ("inet: introduce ireq_family") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
With request socks convergence, we no longer need different lookup methods. A request socket can use generic lookup function. Add const qualifier to 2nd tcp_v[46]_md5_lookup() parameter. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since request and established sockets now have same base, there is no need to pass two pointers to tcp_v4_md5_hash_skb() or tcp_v6_md5_hash_skb() Also add a const qualifier to their struct tcp_md5sig_key argument. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It is guaranteed that both tcp_v4_rcv() and tcp_v6_rcv() run from rcu read locked sections : ip_local_deliver_finish() and ip6_input_finish() both use rcu_read_lock() Also align tcp_v6_inbound_md5_hash() on tcp_v4_inbound_md5_hash() by returning a boolean. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While timer handler effectively runs a rcu read locked section, there is no explicit rcu_read_lock()/rcu_read_unlock() annotations and lockdep can be confused here : net/ipv4/tcp_ipv4.c-906- /* caller either holds rcu_read_lock() or socket lock */ net/ipv4/tcp_ipv4.c:907: md5sig = rcu_dereference_check(tp->md5sig_info, net/ipv4/tcp_ipv4.c-908- sock_owned_by_user(sk) || net/ipv4/tcp_ipv4.c-909- lockdep_is_held(&sk->sk_lock.slock)); Let's explicitely acquire rcu_read_lock() in tcp_make_synack() Before commit fa76ce73 ("inet: get rid of central tcp/dccp listener timer"), we were holding listener lock so lockdep was happy. Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NEric DUmazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
rhashtable_destroy() variant which stops rehashes, iterates over the table and calls a callback to release resources. Avoids need for nft_hash to embed rhashtable internals and allows to get rid of the being_destroyed flag. It also saves a 2nd mutex lock upon destruction. Also fixes an RCU lockdep splash on nft set destruction due to calling rht_for_each_entry_safe() without holding bucket locks. Open code this loop as we need know that no mutations may occur in parallel. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Introduce a new bool automatic_shrinking to require the user to explicitly opt-in to automatic shrinking of tables. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Sekletar 提交于
If vlan offloading takes place then vlan header is removed from frame and its contents, both vlan_tci and vlan_proto, is available to user space via TPACKET interface. However, only vlan_tci can be used in BPF filters. This commit introduces a new BPF extension. It makes possible to load the value of vlan_proto (vlan TPID) to register A. Support for classic BPF and eBPF is being added, analogous to skb->protocol. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jiri Pirko <jpirko@redhat.com> Signed-off-by: NMichal Sekletar <msekleta@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Those warnings reported by sparse endianness check (via kbuild test robot) are harmless, nevertheless fix them up and make the code a little bit easier to read. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Fixes: 622c81d5 ("ipv6: generation of stable privacy addresses for link-local and autoconf") Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
When IPV6=m and TIPC=y, below error will appear during building kernel image: net/tipc/udp_media.c:196: undefined reference to `ip6_dst_lookup' make: *** [vmlinux] Error 1 As ip6_dst_lookup() is implemented in IPV6 and IPV6 is compiled as module, ip6_dst_lookup() is not built-in core kernel image. As a result, compiler cannot find 'ip6_dst_lookup' reference while compiling TIPC code into core kernel image. But with the method introduced by commit 5f81bd2e ("ipv6: export a stub for IPv6 symbols used by vxlan"), we can avoid the compile error through "ipv6_stub" pointer to access ip6_dst_lookup(). Fixes: d0f91938 ("tipc: add ip/udp media type") Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
With dev group, we can change a batch of net devices, so we should allow to delete them together too. Group 0 is not allowed to be deleted since it is the default group. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sasha Levin 提交于
Commit f2f8036e ("tipc: add support for connect() on dgram/rdm sockets") hasn't validated user input length for the sockaddr structure which allows a user to overwrite kernel memory with arbitrary input. Fixes: f2f8036e ("tipc: add support for connect() on dgram/rdm sockets") Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2015 18 次提交
-
-
由 Hannes Frederic Sowa 提交于
This is specified by RFC 7217. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
If a DAD conflict is detected, we want to retry privacy stable address generation up to idgen_retries (= 3) times with a delay of idgen_delay (= 1 second). Add the logic to addrconf_dad_failure. By design, we don't clean up dad failed permanent addresses. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
We need to mark appropriate addresses so we can do retries in case their DAD failed. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch implements the stable privacy address generation for link-local and autoconf addresses as specified in RFC7217. RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key) is the RID (random identifier). As the hash function F we chose one round of sha1. Prefix will be either the link-local prefix or the router advertised one. As Net_Iface we use the MAC address of the device. DAD_Counter and secret_key are implemented as specified. We don't use Network_ID, as it couples the code too closely to other subsystems. It is specified as optional in the RFC. As Net_Iface we only use the MAC address: we simply have no stable identifier in the kernel we could possibly use: because this code might run very early, we cannot depend on names, as they might be changed by user space early on during the boot process. A new address generation mode is introduced, IN6_ADDR_GEN_MODE_STABLE_PRIVACY. With iproute2 one can switch back to none or eui64 address configuration mode although the stable_secret is already set. We refuse writes to ipv6/conf/all/stable_secret but only allow ipv6/conf/default/stable_secret and the interface specific file to be written to. The default stable_secret is used as the parameter for the namespace, the interface specific can overwrite the secret, e.g. when switching a network configuration from one system to another while inheriting the secret. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch implements the procfs logic for the stable_address knob: The secret is formatted as an ipv6 address and will be stored per interface and per namespace. We track initialized flag and return EIO errors until the secret is set. We don't inherit the secret to newly created namespaces. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. The default is now jhash so removing the setting makes no difference apart from making one less copy of jhash in the kernel. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. As the key length is a multiple of 4, this means that we will actually end up using jhash2. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Drozdov 提交于
Introduce TP_STATUS_CSUM_VALID tp_status flag to tell the af_packet user that at least the transport header checksum has been already validated. For now, the flag may be set for incoming packets only. Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Drozdov 提交于
It is just an optimization. We don't need the value of status variable if the packet is filtered. Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
Eric Hugne reported following error : I'm hitting this warning on latest net-next when i try to SSH into a machine with eth0 added to a bridge (but i think the problem is older than that) Steps to reproduce: node2 ~ # brctl addif br0 eth0 [ 223.758785] device eth0 entered promiscuous mode node2 ~ # ip link set br0 up [ 244.503614] br0: port 1(eth0) entered forwarding state [ 244.505108] br0: port 1(eth0) entered forwarding state node2 ~ # [ 251.160159] ------------[ cut here ]------------ [ 251.160831] WARNING: CPU: 0 PID: 3 at include/net/request_sock.h:102 tcp_v4_err+0x6b1/0x720() [ 251.162077] Modules linked in: [ 251.162496] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc3+ #18 [ 251.163334] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 251.164078] ffffffff81a8365c ffff880038a6ba18 ffffffff8162ace4 0000000000009898 [ 251.165084] 0000000000000000 ffff880038a6ba58 ffffffff8104da85 ffff88003fa437c0 [ 251.166195] ffff88003fa437c0 ffff88003fa74e00 ffff88003fa43bb8 ffff88003fad99a0 [ 251.167203] Call Trace: [ 251.167533] [<ffffffff8162ace4>] dump_stack+0x45/0x57 [ 251.168206] [<ffffffff8104da85>] warn_slowpath_common+0x85/0xc0 [ 251.169239] [<ffffffff8104db65>] warn_slowpath_null+0x15/0x20 [ 251.170271] [<ffffffff81559d51>] tcp_v4_err+0x6b1/0x720 [ 251.171408] [<ffffffff81630d03>] ? _raw_read_lock_irq+0x3/0x10 [ 251.172589] [<ffffffff81534e20>] ? inet_del_offload+0x40/0x40 [ 251.173366] [<ffffffff81569295>] icmp_socket_deliver+0x65/0xb0 [ 251.174134] [<ffffffff815693a2>] icmp_unreach+0xc2/0x280 [ 251.174820] [<ffffffff8156a82d>] icmp_rcv+0x2bd/0x3a0 [ 251.175473] [<ffffffff81534ea2>] ip_local_deliver_finish+0x82/0x1e0 [ 251.176282] [<ffffffff815354d8>] ip_local_deliver+0x88/0x90 [ 251.177004] [<ffffffff815350f0>] ip_rcv_finish+0xf0/0x310 [ 251.177693] [<ffffffff815357bc>] ip_rcv+0x2dc/0x390 [ 251.178336] [<ffffffff814f5da3>] __netif_receive_skb_core+0x713/0xa20 [ 251.179170] [<ffffffff814f7fca>] __netif_receive_skb+0x1a/0x80 [ 251.179922] [<ffffffff814f97d4>] process_backlog+0x94/0x120 [ 251.180639] [<ffffffff814f9612>] net_rx_action+0x1e2/0x310 [ 251.181356] [<ffffffff81051267>] __do_softirq+0xa7/0x290 [ 251.182046] [<ffffffff81051469>] run_ksoftirqd+0x19/0x30 [ 251.182726] [<ffffffff8106cc23>] smpboot_thread_fn+0x153/0x1d0 [ 251.183485] [<ffffffff8106cad0>] ? SyS_setgroups+0x130/0x130 [ 251.184228] [<ffffffff8106935e>] kthread+0xee/0x110 [ 251.184871] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.185690] [<ffffffff81631108>] ret_from_fork+0x58/0x90 [ 251.186385] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.187216] ---[ end trace c947fc7b24e42ea1 ]--- [ 259.542268] br0: port 1(eth0) entered forwarding state Remove the double calls to reqsk_put() [edumazet] : I got confused because reqsk_timer_handler() _has_ to call reqsk_put(req) after calling inet_csk_reqsk_queue_drop(), as the timer handler holds a reference on req. Signed-off-by: NFan Du <fan.du@intel.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NErik Hugne <erik.hugne@ericsson.com> Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
When I updated the code to address a possible null pointer dereference in resize I ended up reverting an exception handling fix for the suffix length in the event that inflate or halve failed. This change is meant to correct that by reverting the earlier fix and instead simply getting the parent again after inflate has been completed to avoid the possible null pointer issue. Fixes: ddb4b9a1 ("fib_trie: Address possible NULL pointer dereference in resize") Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki/吉藤英明 提交于
net: Move the comment about unsettable socket-level options to default clause and update its reference. We implement the SO_SNDLOWAT etc not to be settable and return ENOPROTOOPT per 1003.1g 7. Move the comment to appropriate position and update the reference. Signed-off-by: NYOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
dccp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
dccp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New dccp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New tcp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually. We hold syn_wait_lock for such small sections, that it makes no sense to use a read/write lock. A spin lock is simply faster. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-