Add 512x support using the psc_ops framework established
with the previous patch.

All 512x PSCs share the same interrupt so add
IRQF_SHARED to irq flags.
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

PSC devices are different between the mpc5200 and the mpc5121
this patch localizes the differences in preparation for adding mpc5121
support to the psc uart driver.
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Minimal /dts-v1/ device tree for mpc5121 ads.

port-number property in uart nodes
will go away after the driver learns to use aliases
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

512x is very similar to 83xx and most
of this is patterned after code from 83xx.

New platform:
    changed:
	arch/powerpc/Kconfig
	arch/powerpc/platforms/Kconfig
	arch/powerpc/platforms/Kconfig.cputype
	arch/powerpc/platforms/Makefile
    new:
	arch/powerpc/platforms/512x/*
	include/asm-powerpc/mpc512x.h
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch adds support for setting up a fixed IOMMU mapping on certain
cell machines.  For 64-bit devices this avoids the performance overhead of
mapping and unmapping pages at runtime.  32-bit devices are unable to use
the fixed mapping.

The fixed mapping is established at boot, and maps all of physical memory
1:1 into device space at some offset.  On machines with < 30 GB of memory
we setup the fixed mapping immediately above the normal IOMMU window.

For example a machine with 4GB of memory would end up with the normal
IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
3GB, plus any offset required by firmware.  The firmware offset is encoded
in the "dma-ranges" property.

On machines with 30GB or more of memory, we are unable to place the fixed
mapping above the normal IOMMU window as we would run out of address space.
Instead we move the normal IOMMU window to coincide with the hash page
table, this region does not need to be part of the fixed mapping as no
device should ever be DMA'ing to it.  We then setup the fixed mapping
from 0 to 32GB.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split out the ioid fetching and checking logic so we can use it elsewhere
in a subsequent patch.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support to cell_iommu_setup_page_tables() for handling two windows,
the dynamic window and the fixed window.  A fixed window size of 0
indicates that there is no fixed window at all.

Currently there are no callers who pass a non-zero fixed window, but the
upcoming fixed IOMMU mapping patch will change that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split the IOMMU logic out from cell_dma_dev_setup() into a separate
function.  If we're not using dma_direct_ops or dma_iommu_ops we don't
know what the hell's going on, so BUG.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split cell_iommu_setup_hardware() into two parts.  Split the page table
setup into cell_iommu_setup_page_tables() and the bits that kick the
hardware into cell_iommu_enable_hardware().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Split out the logic that allocates a struct iommu into a separate
function.  This can fail however the calling code has never cared - so
just return if we can't allocate an iommu.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In order to support the fixed IOMMU mapping (in a subsequent patch),
we need the hash table to be inside the IOMMUs DMA window.  This is
usually 2G, but let's make sure the hash table is under 1G as that
will satisfy the IOMMU requirements and also means the hash table will
be on node 0.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] use SGI_HAS_INDYDOG for INDYDOG depends

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
  lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
  lguest: Use explicit includes rateher than indirect
  lguest: get rid of lg variable assignments
  lguest: change gpte_addr header
  lguest: move changed bitmap to lg_cpu
  lguest: move last_pages to lg_cpu
  lguest: change last_guest to last_cpu
  lguest: change spte_addr header
  lguest: per-vcpu lguest pgdir management
  lguest: make pending notifications per-vcpu
  lguest: makes special fields be per-vcpu
  lguest: per-vcpu lguest task management
  lguest: replace lguest_arch with lg_cpu_arch.
  lguest: make registers per-vcpu
  lguest: make emulate_insn receive a vcpu struct.
  lguest: map_switcher_in_guest() per-vcpu
  lguest: per-vcpu interrupt processing.
  lguest: per-vcpu lguest timers
  lguest: make hypercalls use the vcpu struct
  lguest: make write() operation smp aware
  ...

Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  security: compile capabilities by default
  selinux: make selinux_set_mnt_opts() static
  SELinux: Add warning messages on network denial due to error
  SELinux: Add network ingress and egress control permission checks
  NetLabel: Add auditing to the static labeling mechanism
  NetLabel: Introduce static network labels for unlabeled connections
  SELinux: Allow NetLabel to directly cache SIDs
  SELinux: Enable dynamic enable/disable of the network access checks
  SELinux: Better integration between peer labeling subsystems
  SELinux: Add a new peer class and permissions to the Flask definitions
  SELinux: Add a capabilities bitmap to SELinux policy version 22
  SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
  SELinux: Only store the network interface's ifindex
  SELinux: Convert the netif code to use ifindex values
  NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function
  NetLabel: Add secid token support to the NetLabel secattr struct
  NetLabel: Consolidate the LSM domain mapping/hashing locks
  NetLabel: Cleanup the LSM domain hash functions
  NetLabel: Remove unneeded RCU read locks

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  PPC: Fix powerpc vio_find_name to not use devices_subsys
  Driver core: add bus_find_device_by_name function
  Module: check to see if we have a built in module with the same name
  x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
  Driver core: Fix up build when CONFIG_BLOCK=N

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (249 commits)
  KVM: Move apic timer migration away from critical section
  KVM: Put kvm_para.h include outside __KERNEL__
  KVM: Fix unbounded preemption latency
  KVM: Initialize the mmu caches only after verifying cpu support
  KVM: MMU: Fix dirty page setting for pages removed from rmap
  KVM: Portability: Move kvm_fpu to asm-x86/kvm.h
  KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD
  KVM: MMU: Merge shadow level check in FNAME(fetch)
  KVM: MMU: Move kvm_free_some_pages() into critical section
  KVM: MMU: Switch to mmu spinlock
  KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte()
  KVM: Add kvm_read_guest_atomic()
  KVM: MMU: Concurrent guest walkers
  KVM: Disable vapic support on Intel machines with FlexPriority
  KVM: Accelerated apic support
  KVM: local APIC TPR access reporting facility
  KVM: Print data for unimplemented wrmsr
  KVM: MMU: Add cache miss statistic
  KVM: MMU: Coalesce remote tlb flushes
  KVM: Expose ioapic to ia64 save/restore APIs
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: (21 commits)
  dlm: static initialization improvements
  dlm: clean ups
  dlm: Sanity check namelen before copying it
  dlm: keep cached master rsbs during recovery
  dlm: change error message to debug
  dlm: fix possible use-after-free
  dlm: limit dir lookup loop
  dlm: reject normal unlock when lock is waiting for lookup
  dlm: validate messages before processing
  dlm: reject messages from non-members
  dlm: another call to confirm_master in receive_request_reply
  dlm: recover locks waiting for overlap replies
  dlm: clear ast_type when removing from astqueue
  dlm: use fixed errno values in messages
  dlm: swap bytes for rcom lock reply
  dlm: align midcomms message buffer
  dlm: close othercons
  dlm: use dlm prefix on alloc and free functions
  dlm: don't print common non-errors
  dlm: proper prototypes
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits)
  [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls"
  [SCSI] bsg: copy the cmd_type field to the subordinate request for bidi
  [SCSI] handle scsi_init_queue failure properly
  [SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queue
  [SCSI] scsi_debug: add XDWRITEREAD_10 support
  [SCSI] scsi_debug: add bidi data transfer support
  [SCSI] scsi_debug: add get_data_transfer_info helper function
  [SCSI] remove use_sg_chaining
  [SCSI] bidirectional: fix up for the new blk_end_request code
  [SCSI] bidirectional command support
  [SCSI] implement scsi_data_buffer
  [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable
  [SCSI] aic7xxx: fix warnings with CONFIG_PM disabled
  [SCSI] aic79xx: fix warnings with CONFIG_PM disabled
  [SCSI] aic7xxx: fix ahc_done check SCB_ACTIVE for tagged transactions
  [SCSI] sgiwd93: use cached memory access to make driver work on IP28
  [SCSI] zfcp: fix sense_buffer access bug
  [SCSI] ncr53c8xx: fix sense_buffer access bug
  [SCSI] aic79xx: fix sense_buffer access bug
  [SCSI] hptiop: fix sense_buffer access bug
  ...

Fix docbook fatal error:
docproc: linux-2.6.24-git8/block/ll_rw_blk.c: No such file or directory
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc empty line warning:
Warning(linux-2.6.24-git8//drivers/base/class.c:866): bad line:
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit a119ee8e.

Adaptec found this was causing system lockups.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This fixes a problem in SCSI where we use the (previously
uninitialised) cmd_type via blk_pc_request() to set up the transfer in
scsi_init_sgtable().
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

scsi_init_queue is expected to clean up allocated things when it
fails.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Needs to call kmem_cache_destroy for scsi_bidi_sdb_cache in
scsi_exit_queue.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This enables fill_from_dev_buffer and fetch_to_dev_buffer to handle
bidi commands.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This adds get_data_transfer_info helper function that get lha and
sectors for READ_* and WRITE_* commands (and XDWRITEREAD_10 later).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

At the block level bidi request uses req->next_rq pointer for a second
bidi_read request.
At Scsi-midlayer a second scsi_data_buffer structure is used for the
bidi_read part. This bidi scsi_data_buffer is put on
request->next_rq->special. Struct scsi_cmnd is not changed.

- Define scsi_bidi_cmnd() to return true if it is a bidi request and a
  second sgtable was allocated.

- Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer
  from this command This API is to isolate users from the mechanics of
  bidi.

- Define scsi_end_bidi_request() to do what scsi_end_request() does but
  for a bidi request. This is necessary because bidi commands are a bit
  tricky here. (See comments in body)

- scsi_release_buffers() will also release the bidi_read scsi_data_buffer

- scsi_io_completion() on bidi commands will now call
  scsi_end_bidi_request() and return.

- The previous work done in scsi_init_io() is now done in a new
  scsi_init_sgtable() (which is 99% identical to old scsi_init_io())
  The new scsi_init_io() will call the above twice if needed also for
  the bidi_read command. Only at this point is a command bidi.

- In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not
  confused by a get-sense command that looks like bidi. This is done
  by puting NULL at request->next_rq, and restoring.

[jejb: update to sg_table and resolve conflicts
also update to blk-end-request and resolve conflicts]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

In preparation for bidi we abstract all IO members of scsi_cmnd,
that will need to duplicate, into a substructure.

- Group all IO members of scsi_cmnd into a scsi_data_buffer
  structure.
- Adjust accessors to new members.
- scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of
  scsi_cmnd. And work on it.
- Adjust scsi_init_io() and  scsi_release_buffers() for above
  change.
- Fix other parts of scsi_lib/scsi.c to members migration. Use
  accessors where appropriate.

- fix Documentation about scsi_cmnd in scsi_host.h

- scsi_error.c
  * Changed needed members of struct scsi_eh_save.
  * Careful considerations in scsi_eh_prep/restore_cmnd.

- sd.c and sr.c
  * sd and sr would adjust IO size to align on device's block
    size so code needs to change once we move to scsi_data_buff
    implementation.
  * Convert code to use scsi_for_each_sg
  * Use data accessors where appropriate.

- tgt: convert libsrp to use scsi_data_buffer

- isd200: This driver still bangs on scsi_cmnd IO members,
  so need changing

[jejb: rebased on top of sg_table patches fixed up conflicts
and used the synergy to eliminate use_sg and sg_count]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If we export scsi_init_io()/scsi_release_buffers() instead of
scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more
insulated from scsi_lib changes. As a bonus it will also gain bidi
capability when it comes.

[jejb: rebase on to sg_table and fix up rejections]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  CC [M]  drivers/scsi/aic7xxx/aic7xxx_osm_pci.o
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:148: warning: 'ahc_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:166: warning: 'ahc_linux_pci_dev_resume' defined but not used

This moves aic7xxx_pci_driver struct, removes some forward declarations,
and adds some ifdef CONFIG_PM.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  CC [M]  drivers/scsi/aic7xxx/aic79xx_osm_pci.o
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:101: warning: 'ahd_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:121: warning: 'ahd_linux_pci_dev_resume' defined but not used

This moves aic79xx_pci_driver struct, removes some forward
declarations, and adds some ifdef CONFIG_PM.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The driver only needs to check the SCB_ACTIVE flag if the SCB is not
in the untagged queue.

If the driver is in error recovery, you may end panic'ing on a TUR
that is in the untagged queue.

Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
SCB 3 done'd twice

This patch is included in Adaptec's 6.3.11 driver on their website.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

SGI IP28 machines would need special treatment (enable adding addtional
wait states) when accessing memory uncached. To avoid this pain I
changed the driver to use only cached access to memory.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The commit de25deb1 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>