This adds a struct eeti_ts_platform_data which currently holds only one
value to specify the interrupt polarity.

The driver has a fallback if no platform data is passed in via the
i2c_board_info, so no regression is caused.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.
Tested-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Rename functions and variables from [hil_]kbd to [hil_]dev in
preparation of merging hil_kbd and hil_ptr.
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Stop abusing semaphore for waiting, use completion instead. Also handle
errors from input_register_device.
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also start using 'bool' where it makes sense.
Tested-by: NGiuseppe Mazzotta <g.mazzotta@iragan.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We have a nice wrapper for that.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The OLPC XO laptop incorporates a combination touchpad/tablet device
which unfortunately requires frequent recalibration.  The driver will
force this automatically when various suspicious behaviors are
observed, and the user can recalibrate manually (with a special
keyboard sequence). There's currently no way, however, for an external
program to cause recalibration. We can not use the reconnect
capability which is already available in /sys because full reset of
the touchpad takes 1.1 - 1.2 secons which is too long.

This patch creates a new node in /sys which, when written with '1',
will force a touchpad recalibration; no other writes (or reads)
of this node are supported.
Signed-off-by: NPaul Fox <pgf@laptop.org>
Acked-by: NAndres Salomon <dilinger@collabora.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Check the result when sending the power down command to the controller.
Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In cases when get_pendown_state callback is not available have
the driver to fallback on pressure calculation to determine if
the pen is up.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds support for the e2i touchscreen controller used in the
Mimo 740 (and probably in other e2i touchscreen products). Tested on
Mimo 740.
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Don't read coordinates during probe of the driver, just power down
the controller and wait for interrupts.

Signed-off-by: Richard Röjfors<richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Make init_platform_hw and exit_platform_hw callbacks optional since
they are not needed on all platforms.
Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Properly shut off interrupts/delayed work by free-ing IRQ first
and then ensuring that enable/disable is balanced. Also add
__devinit/__devexit markings, restore poll delay/period scheduling
logic, make sure we call exit_platform_hw() method when probe
fails.
Tested-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Since it's not allowed to do synchronous I2C in the HR timer callback
context we have to switch to using the global workqueue. The work is
scheduled every 1ms when polling rather than 5 us.
Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

They are not supposed to be modified by drivers, so make them const.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This driver handles the Blackfin on-chip rotary peripheral.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().

Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h
Tested-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix UP compile failure caused by irq_thread_check_affinity

Merge branch 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep

* 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep:
  lockdep: Fix lockdep annotation for pipe_double_lock()

Since genirq: Delegate irq affinity setting to the irq thread
(591d2fb0) compilation with
CONFIG_SMP=n fails with following error:

/usr/src/linux-2.6/kernel/irq/manage.c:
   In function 'irq_thread_check_affinity':
/usr/src/linux-2.6/kernel/irq/manage.c:475:
   error: 'struct irq_desc' has no member named 'affinity'
make[4]: *** [kernel/irq/manage.o] Error 1

That commit adds a new function irq_thread_check_affinity() which
uses struct irq_desc.affinity which is only available for CONFIG_SMP=y.
Move that function under #ifdef CONFIG_SMP.

[ tglx@brownpaperbag: compile and boot tested on UP and SMP ]
Signed-off-by: NBruno Premont <bonbons@linux-vserver.org>
LKML-Reference: <20090722222232.2eb3e1c4@neptune.home>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The presumed use of the pipe_double_lock() routine is to lock 2 locks in
a deadlock free way by ordering the locks by their address. However it
fails to keep the specified lock classes in order and explicitly
annotates a deadlock.

Rectify this.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMiklos Szeredi <mszeredi@suse.cz>
LKML-Reference: <1248163763.15751.11098.camel@twins>

Merge branch 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf

* 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf: (31 commits)
  perf_counter tools: Give perf top inherit option
  perf_counter tools: Fix vmlinux symbol generation breakage
  perf_counter: Detect debugfs location
  perf_counter: Add tracepoint support to perf list, perf stat
  perf symbol: C++ demangling
  perf: avoid structure size confusion by using a fixed size
  perf_counter: Fix throttle/unthrottle event logging
  perf_counter: Improve perf stat and perf record option parsing
  perf_counter: PERF_SAMPLE_ID and inherited counters
  perf_counter: Plug more stack leaks
  perf: Fix stack data leak
  perf_counter: Remove unused variables
  perf_counter: Make call graph option consistent
  perf_counter: Add perf record option to log addresses
  perf_counter: Log vfork as a fork event
  perf_counter: Synthesize VDSO mmap event
  perf_counter: Make sure we dont leak kernel memory to userspace
  perf_counter tools: Fix index boundary check
  perf_counter: Fix the tracepoint channel to perfcounters
  perf_counter, x86: Extend perf_counter Pentium M support
  ...

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softirq: introduce tasklet_hrtimer infrastructure

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: Prevent NULL pointer dereference
  timer: Avoid reading uninitialized data

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Delegate irq affinity setting to the irq thread

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix nr_uninterruptible accounting of frozen tasks really
  sched: fix load average accounting vs. cpu hotplug
  sched: Account for vruntime wrapping

* 'tj-block-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  virtio_blk: mark virtio_blk with __refdata to kill spurious section mismatch
  block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel
  ataflop: adjust NULL test
  block: fix failfast merge testing in elv_rq_merge_ok()
  z2ram: Small cleanup for z2ram.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  fs/Kconfig: move nilfs2 out

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide-tape: Don't leak kernel stack information
  ide: fix memory leak when flush command is issued

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  sky2: Avoid races in sky2_down
  drivers/net/mlx4: Adjust constant
  drivers/net: Move a dereference below a NULL test
  drivers/net: Move a dereference below a NULL test
  connector: maintainer/mail update.
  USB host CDC Phonet network interface driver
  macsonic, jazzsonic: fix oops on module unload
  macsonic: move probe function to .devinit.text
  can: switch carrier on if device was stopped while in bus-off state
  can: restart device even if dev_alloc_skb() fails
  can: sja1000: remove duplicated includes
  New device ID for sc92031 [1088:2031]
  3c589_cs: re-initialize the multicast in the tc589_reset
  Fix error return for setsockopt(SO_TIMESTAMPING)
  netxen: fix thermal check and shutdown
  netxen: fix deadlock on dev close
  netxen: fix context deletion sequence
  net: Micrel KS8851 SPI network driver
  tcp: Use correct peer adr when copying MD5 keys
  tcp: Fix MD5 signature checking on IPv4 mapped sockets
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: Fix a problem whereby a buggy server can oops the kernel
  NFSv4: Fix an NFSv4 mount regression
  NFSv4: Fix an Oops in nfs4_free_lock_state