This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ras.o is only built for CONFIG_PPC_PSERIES, so move it into
arch/powerpc/platforms/pseries. Update Makefiles to suit.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* Removed of_show_percpuinfo and just report CPU frequency in generic
  show_cpuinfo code.
* Killed OCP and PPC_SYS related code which doesn't belong in the
  merge tree
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We need to initialize some control SPRS for timers on Book-E before
we start taking decrementer interrupts.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A recent patch updated the name of pci_assign_all_busses to
pci_assign_all_buses.  This instance of its use wasn't corrected
by the original patch to use the new name.

Builds cleanly on ads8272.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0.  This is ok, but
we can't assign a value to _machine then.

We may not have CONFIG_PCI available, so only build in support for
find_parent_pci_resource(), request_OF_resource(), release_OF_resource()
if PCI is enabled.  This is probably not the long term fix but works out
for now.

Make reg_property64 contain 64-bit elements on a 32-bit machine.

Mark the deprecated prom.c functions as __deprecated.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Its valid for ppc_md.set_rtc_time to be NULL.  We need to check
that its non-NULL before trying to update the RTC.
Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown()
which converts from struct device to struct vio_dev and knows how to extract
the struct vio_driver.

Original patch adjusted for different location of vio.c.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

A comment in lpevents.c refers to code that's actually in HvCallEvent.h.
The code in HvCallEvent.h is pretty obvious, so just remove the comment
altogether.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>

Just set the name field directly in the device_driver structure
contained in the vio_driver struct.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update
the Makefiles to make it work, and make ARCH=ppc64 still work.

Michael's version put vio.c in arch/powerpc/sysedv but after consolting
Paulus, this one puts it in arch/powerpc/kernel.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Previously it claimed 7MB starting at the 9M point and loaded the
kernel there.  That meant that prom_init put the flattened device
tree above 16M.  On the 601 that caused the early device tree scan
to fail, since only 16MB are mapped with BATs on the 601.  Moving
this down to 8MB allows prom_init to put the flattened device tree
between 15M and 16M, so it works on the 601.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Old powermacs have a number of differences from current machines:
- there is no interrupt tree in the device tree, just interrupt
  or AAPL,interrupt properties
- the chosen node in the device tree is called /chosen@0
- the OF claim method doesn't map the memory, so we have to do
  an explicit map call as well
- there is no /chosen/cpu property on SMP machines
- the NVRAM isn't structured as a set of partitions.

This adapts the merged powermac support code to cope with these
issues.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The 601 doesn't have the timebase register; instead it has an RTCL
register that counts nanoseconds and wraps at 1000000000, and an
RTCU register that counts seconds.  This makes the necessary changes
for the merged time code to use the RTCL/U registers when the kernel
is running on a 601.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac
instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to
arch/powerpc/platforms/powermac/*.c and makes various minor tweaks
elsewhere.  On the powermac we now initialize ppc_md by copying
the whole pmac_md structure into it, which required some changes in
the ordering of initializations of individual fields of it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... for consistency with ppc32, and because this way is neater.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Moved init_boot_display from arch/ppc64/kernel/pmac_setup.c to
arch/ppc64/kernel/btext.c and declared it in asm-ppc64/btext.h.
Call it from init_early rather than pmac_init_early.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... for consistency with ppc32 and to make the powermac merge easier.
Also make it use just a single resource in the host bridge for multiple
consecutive elements of the ranges property.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This moves smp_space_timers from arch/ppc64/kernel/smp.c to
arch/powerpc/kernel/time.c and makes it initialize last_jiffy[]
instead of paca[].next_jiffy_update_tb, since last_jiffy[] is
now what the time code uses.  It also declares smp_space_timers
in include/asm-powerpc/time.h and gets rid of an ifdef in
div128_by_32.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

An error in merging led to 32-bit processes getting the wrong link
register value on entry to RT signal handlers, and the wrong stack
chain as well.  This fixes it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... instead of exporting it in arch/*/kernel/ppc_ksyms.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Not sure how it slipped by, but here's a trivial typo fix for powernow.
Signed-off-by: NChris Wright <chrisw@osdl.org>
[ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

AMD recently discovered that on some hardware, there is a race condition
possible when a C-state change request goes onto the bus at the same
time as a P-state change request.

Both requests happen, but the southbridge hardware only acknowledges the
C-state change.  The PowerNow! driver is then stuck in a loop, waiting
for the P-state change acknowledgement.  The driver eventually times
out, but can no longer perform P-state changes.

It turns out the solution is to resend the P-state change, which the
southbridge will acknowledge normally.

Thanks to Johannes Winkelmann for reporting this and testing the fix.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a stupid typo bug in the iSeries hash table code.

When we place a hash PTE in the secondary bucket, instead of setting the
SECONDARY flag bit, as we should, we (redundantly) set the VALID flag.

This was introduced with the patch abolishing bitfields from the hash
table code.  Mea culpa, oops.  It hasn't been noticed until now because
in practice we don't hit the secondary bucket terribly often.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While working on 64K pages, I found this little buglet in our
update_mmu_cache() implementation.

The code calls __hash_page() passing it an "access" parameter (the type
of access that triggers the hash) containing the bits _PAGE_RW and
_PAGE_USER of the linux PTE.  The latter is useless in this case and the
former is wrong.  In fact, if we have a writeable PTE and we pass
_PAGE_RW to hash_page(), it will set _PAGE_DIRTY (since we track dirty
that way, by hash faulting !dirty) which is not what we want.

In fact, the correct fix is to always pass 0. That means that only
read-only or already dirty read write PTEs will be preloaded. The
(hopefully rare) case of a non dirty read write PTE can't be preloaded
this way, it will have to fault in hash_page on the actual access.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a typo in the div128_by_32 function used in the timekeeping
calculations on ppc64.  If you look at the code it's quite obvious
that we need (rb + c) rather than (rb + b).  The "b" is clearly just a
typo.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The merge of syscalls.c & sys_ppc32.c (30286ef6)
broke mmap, if the mmap returned a 64 bit address.

do_mmap2 was taking the return value from do_mmap_pgoff (an unsigned long), and
storing it in an int, before returning it to sys_mmap as an unsigned long. So
we were losing the high bits of the address.

You would have thought the compiler could catch this for us ...
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The patch to make process.c work for 32-bit and 64-bit
(06d67d54) broke some 64-bit binaries.
We were blowing away load_addr in gpr[2], so we weren't properly relocating
the entry point.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Merge ppc32 and ppc64 versions of thread_info.h.  They were pretty
similar already, the chief changes are:

	- Instead of inline asm to implement current_thread_info(),
which needs to be different for ppc32 and ppc64, we use C with an
asm("r1") register variable.  gcc turns it into the same asm as we
used to have for both platforms.
	- We replace ppc32's 'local_flags' with the ppc64
'syscall_noerror' field.  The noerror flag was in fact the only thing
in the local_flags field anyway, so the ppc64 approach is simpler, and
means we only need a load-immediate/store instead of load/mask/store
when clearing the flag.
	- In readiness for 64k pages, when THREAD_SIZE will be less
than a page, ppc64 used kmalloc() rather than get_free_pages() to
allocate the kernel stack.  With this patch we do the same for ppc32,
since there's no strong reason not to.
	- For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE
via asm-offsets, thread_info.h can now be safely included in asm, as
on ppc32.

Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and
Power5 (ARCH=ppc64 and ARCH=powerpc).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In the merge tree, commit 0458060c
broke boot on some machines because the initialization of conswitchp
was moved to arch/powerpc/kernel/setup_64.c, but a corresponding copy
was not added to arch/ppc64/kernel/setup.c.  This patch fixes it.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

The current Simtec BAST nand area timings are a little
too slow to be obtained by a 2410 running at 266MHz,
so reduce the timings slightly to bring them into the
acceptable range.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Matt Reimer

Adds an I2S platform_device for PXA. I2S is used to interface
with sound chips on systems like iPAQ h1910/h2200/hx4700 and
Asus 716.

Signed-off-by: mreimer@vpop.net
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

I had the sense of the test for when to use the old 601-style RTC
registers inverted.  pmac_calibrate_decr and via_calibrate_decr
weren't setting ppc_tb_freq, on which all the further calculations
depended.  Lastly, update_gtod was losing the top 32 bits of
the new tb_to_xs value.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This declares powersave_nap in system.h and makes it an int everywhere,
fixes typos for the maple platform, fixes a couple of places where
I missed removing the last two arguments from a message_pass function,
and makes ppc64 consistent with ppc32 in the type of the
pci_bridge.cfg_data field.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This means we now compile in arch/powerpc/sysdev for ARCH=ppc64.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Previously the individual xxx_calibrate_decr functions would each
print the timebase and cpu frequency and calculate several values
such as tb_to_us and tb_to_xs.  This moves those printks and
calculations into time_init just after the call to the platform's
calibrate_decr function.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This way they get done in one place for all platforms, and it is
more consistent with what ppc32 does.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

... for consistency with ppc64 and to make merging easier.
Signed-off-by: NPaul Mackerras <paulus@samba.org>