- 18 10月, 2010 13 次提交
-
-
由 Kukjin Kim 提交于
This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves some initial maps from plat-s5p to machine, so that can merge mach-s5p6440 and mach-s5p6450. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
-
- 15 10月, 2010 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Tony Luck reports that the addition of the access_ok() check in commit 0eead9ab ("Don't dump task struct in a.out core-dumps") broke the ia64 compile due to missing the necessary header file includes. Rather than add yet another include (<asm/unistd.h>) to make everything happy, just uninline the silly core dump helper functions and move the bodies to fs/exec.c where they make a lot more sense. dump_seek() in particular was too big to be an inline function anyway, and none of them are in any way performance-critical. And we really don't need to mess up our include file headers more than they already are. Reported-and-tested-by: NTony Luck <tony.luck@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
-
由 Linus Torvalds 提交于
akiphie points out that a.out core-dumps have that odd task struct dumping that was never used and was never really a good idea (it goes back into the mists of history, probably the original core-dumping code). Just remove it. Also do the access_ok() check on dump_write(). It probably doesn't matter (since normal filesystems all seem to do it anyway), but he points out that it's normally done by the VFS layer, so ... [ I suspect that we should possibly do "vfs_write()" instead of calling ->write directly. That also does the whole fsnotify and write statistics thing, which may or may not be a good idea. ] And just to be anal, do this all for the x86-64 32-bit a.out emulation code too, even though it's not enabled (and won't currently even compile) Reported-by: Nakiphie <akiphie@lavabit.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2010 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Fix typo of time extends per page perf, MIPS: Support cross compiling of tools/perf for MIPS perf: Fix incorrect copy_from_user() usage
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: relax ioremap prohibition (309caa9c) for -final and -stable ARM: 6440/1: ep93xx: DMA: fix channel_disable cpuimx27: fix i2c bus selection cpuimx27: fix compile when ULPI is selected ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors ARM: fix section mismatch warnings in Versatile Express ARM: 6412/1: kprobes-decode: add support for MOVW instruction ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: iommu-load cam register before flushing the entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Silent spurious error message drm/radeon/kms: fix bad cast/shift in evergreen.c drm/radeon/kms: make TV/DFP table info less verbose drm/radeon/kms: leave certain CP int bits enabled drm/radeon/kms: avoid corner case issue with unmappable vram V2
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: For each node, register the memory blocks actually used x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
-
由 Dan Williams 提交于
Commit 07934481 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: NRichard Scobie <richard@sauce.co.nz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Breno Leitao 提交于
Currently we set all skbs with CHECKSUM_UNNECESSARY, even those whose protocol we don't know. This patch just add the CHECKSUM_COMPLETE tag for non TCP/UDP packets. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 J. Bruce Fields 提交于
As of commit 43a9aa64 "NFSD: Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call fh_unlock on a filehandle that isn't fully initialized. We should fix up the callers, but as a quick fix it is also sufficient just to remove this assertion. Reported-by: NMarius Tolzmann <tolzmann@molgen.mpg.de> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Greg Ungerer 提交于
At least one board using the FEC driver does not have a conventional PHY attached to it, it is directly connected to a somewhat simple ethernet switch (the board is the SnapGear/LITE, and the attached 4-port ethernet switch is a RealTek RTL8305). This switch does not present the usual register interface of a PHY, it presents nothing. So a PHY scan will find nothing - it finds ID's of 0 for each PHY on the attached MII bus. After the FEC driver was changed to use phylib for supporting PHYs it no longer works on this particular board/switch setup. Add code support to use a fixed phy if no PHY is found on the MII bus. This is based on the way the cpmac.c driver solved this same problem. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2010 5 次提交
-
-
由 Russell King 提交于
... but produce a big warning about the problem as encouragement for people to fix their drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
-
由 Mika Westerberg 提交于
When channel_disable() is called, it disables per channel interrupts and waits until channels state becomes STATE_STALL, and then disables the channel. Now, if the DMA transfer is disabled while the channel is in STATE_NEXT we will not wait anything and disable the channel immediately. This seems to cause weird data corruption for example in audio transfers. Fix is to wait while we are in STATE_NEXT or STATE_ON and only then disable the channel. Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi> Acked-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Move TSC reset out of vmcb_init KVM: x86: Fix SVM VMCB reset
-
由 Steven Rostedt 提交于
Time stamps for the ring buffer are created by the difference between two events. Each page of the ring buffer holds a full 64 bit timestamp. Each event has a 27 bit delta stamp from the last event. The unit of time is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events happen more than 134 milliseconds apart, a time extend is inserted to add more bits for the delta. The time extend has 59 bits, which is good for ~18 years. Currently the time extend is committed separately from the event. If an event is discarded before it is committed, due to filtering, the time extend still exists. If all events are being filtered, then after ~134 milliseconds a new time extend will be added to the buffer. This can only happen till the end of the page. Since each page holds a full timestamp, there is no reason to add a time extend to the beginning of a page. Time extends can only fill a page that has actual data at the beginning, so there is no fear that time extends will fill more than a page without any data. When reading an event, a loop is made to skip over time extends since they are only used to maintain the time stamp and are never given to the caller. As a paranoid check to prevent the loop running forever, with the knowledge that time extends may only fill a page, a check is made that tests the iteration of the loop, and if the iteration is more than the number of time extends that can fit in a page a warning is printed and the ring buffer is disabled (all of ftrace is also disabled with it). There is another event type that is called a TIMESTAMP which can hold 64 bits of data in the theoretical case that two events happen 18 years apart. This code has not been implemented, but the name of this event exists, as well as the structure for it. The size of a TIMESTAMP is 16 bytes, where as a time extend is only 8 bytes. The macro used to calculate how many time extends can fit on a page used the TIMESTAMP size instead of the time extend size cutting the amount in half. The following test case can easily trigger the warning since we only need to have half the page filled with time extends to trigger the warning: # cd /sys/kernel/debug/tracing/ # echo function > current_tracer # echo 'common_pid < 0' > events/ftrace/function/filter # echo > trace # echo 1 > trace_marker # sleep 120 # cat trace Enabling the function tracer and then setting the filter to only trace functions where the process id is negative (no events), then clearing the trace buffer to ensure that we have nothing in the buffer, then write to trace_marker to add an event to the beginning of a page, sleep for 2 minutes (only 35 seconds is probably needed, but this guarantees the bug), and then finally reading the trace which will trigger the bug. This patch fixes the typo and prevents the false positive of that warning. Reported-by: NHans J. Koch <hjk@linutronix.de> Tested-by: NHans J. Koch <hjk@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 12 10月, 2010 7 次提交
-
-
由 Deng-Cheng Zhu 提交于
Changes: v4: Fix the cosmetic issue of redundant dot-ops v3: Change rmb() to use SYNC v2: Include mips unistd.h and define rmb()/cpu_relax() in tools/perf/perf.h Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jean Delvare 提交于
I see the following error message in my kernel log from time to time: radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait After investigation, it turns out that there's nothing to be afraid of and everything works as intended. So remove the spurious log message. Signed-off-by: NJean Delvare <khali@linux-fr.org> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Missing parens. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30718Reported-by: NDave Gilbert <freedesktop@treblig.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Reviewed-by: NMatt Turner <mattst88@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Make TV standard and DFP table revisions debug only. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
These bits are used for internal communication and should be left enabled. This may fix s/r issues on some systems. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
We should not allocate any object into unmappable vram if we have no means to access them which on all GPU means having the CP running and on newer GPU having the blit utility working. This patch limit the vram allocation to visible vram until we have acceleration up and running. Note that it's more than unlikely that we run into any issue related to that as when acceleration is not woring userspace should allocate any object in vram beside front buffer which should fit in visible vram. V2 use real_vram_size as mc_vram_size could be bigger than the actual amount of vram [airlied: fixup r700_cp_stop case] Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 John Blackwood 提交于
perf events: repair incorrect use of copy_from_user This makes the perf_event_period() return 0 instead of -EFAULT on success. Signed-off-by: John Blackwood<john.blackwood@ccur.com> Signed-off-by: NJoe Korty <joe.korty@ccur.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100928220311.GA18145@tsunami.ccur.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-