Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the extra space in the nvme_free_cels() when calling
xa_for_each loop which is not a common practice
(except drivers/infiniband/core/ not sure why).
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Just for current code in nvme_cleanup_cmd(), we don't have to get
namespace instance, but we need controller instance.

Controller instance can be retrieved by namespace instance, but it can
be directly accessed by nvme_request instance from request.

	ctrl = nvme_req(req)->ctrl;

We don't have to go around namespace instance from request instance
through gendisk.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The controller can request a delay retrying a failed command by setting
the Command Retry Delay (CRD) field in the Completion Queue Entry.

Currentlty this features is only applied to commands on the I/O queue, but
not to commands on the admin queue.  Retreive the nvme_ctrl from the
request so that no namespace is required and apply the feature to all
commands.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The only usage of these is to put their addresses in arrays of pointers
to const attribute_groups. Make them const to allow the compiler to put
them in read-only memory.
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Always use the bio_set_dev helper to assign ->bi_bdev to make sure
other state related to the device is uptodate.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can remove 'q' from blk_execute_rq as well after the previous change
in blk_execute_rq_nowait.

And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.

Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 'q' is not used since commit a1ce35fa ("block: remove dead
elevator code"), also update the comment of the function.

And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.

Cc: target-devel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device.  From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Unconditionally call set_disk_ro now that it only updates the hardware
state.  This allows to properly set up the Linux devices read-only when
the controller turns a previously writable namespace read-only.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and
the metadata size play a vital role in deteriming the host buffer size.

If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer,
instead the controller adds it.
Signed-off-by: NRevanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Discovery controllers usually don't support smart log page command.
So when we connect to the discovery controller we see this warning:
nvme nvme0: Failed to read smart log (error 24577)
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"

Introduce a new helper to understand if the controller is a discovery
controller and use this helper to skip nvme_init_hwmon (also use it in
other places that we check if the controller is a discovery controller).

Fixes: 400b6a7b ("nvme: Add hardware monitoring support")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The only used argument in this function is the "req".
Signed-off-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There are no callers for nvme_reset_ctrl_sync() and
nvme_alloc_request_qid() so that we keep the symbols exported.

Unexport those functions, mark them static and update the header file
respectively.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.

This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.
Signed-off-by: NJavier González <javier.gonz@samsung.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remane block device operations in preparation to add char device file
operations.
Signed-off-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Rename controller base dev_t char device in preparation for adding a
namespace char device.
Signed-off-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Cleanup unnecessary ret values that are not checked or used in
nvme_alloc_ns().
Signed-off-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

During the scan_work, an Identify command is issued to figure out which
namespaces are active.  If this command fails, the nvme driver falls back
to scanning namespaces sequentially.  In this situation, we don't see
any warnings and don't even know whether list-ns command has been failed
or not easiliy.

Printa warning when the Identify command executin fail:

[    1.108399] nvme nvme0: Identify NS List failed (status=0x400b)
[    1.109583] nvme0n1: detected capacity change from 0 to 1048576
[    1.112186] nvme nvme0: Identify Descriptors failed (nsid=2, status=0x4002)
[    1.113929] nvme nvme0: Identify Descriptors failed (nsid=3, status=0x4002)
[    1.116537] nvme nvme0: Identify Descriptors failed (nsid=4, status=0x4002)
...
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add the namespace ID to the error message when the Identify command used
to retrieve the Namespace Identification Descriptor list fails.

This avoids rather useless and duplicative messages like the following:
[    1.321031] nvme nvme0: Identify Descriptors failed (16386)
[    1.321948] nvme nvme0: Identify Descriptors failed (16386)
[    1.322872] nvme nvme0: Identify Descriptors failed (16386)
[    1.323775] nvme nvme0: Identify Descriptors failed (16386)
[    1.324687] nvme nvme0: Identify Descriptors failed (16386)
...

Also, print the nvme status code in hexadecimal rather than decimal
format rather for better readability.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target.  It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.

Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default).  The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.

To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter.  The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected.  The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: NVictor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChao Leng <lengchao@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Right now nvme_alloc_request() allocates a request from block layer
based on the value of the qid. When qid set to NVME_QID_ANY it used
blk_mq_alloc_request() else blk_mq_alloc_request_hctx().

The function nvme_alloc_request() is called from different context, The
only place where it uses non NVME_QID_ANY value is for fabrics connect
commands :-

nvme_submit_sync_cmd()		NVME_QID_ANY
nvme_features()			NVME_QID_ANY
nvme_sec_submit()		NVME_QID_ANY
nvmf_reg_read32()		NVME_QID_ANY
nvmf_reg_read64()		NVME_QID_ANY
nvmf_reg_write32()		NVME_QID_ANY
nvmf_connect_admin_queue()	NVME_QID_ANY
nvme_submit_user_cmd()		NVME_QID_ANY
	nvme_alloc_request()
nvme_keep_alive()		NVME_QID_ANY
	nvme_alloc_request()
nvme_timeout()			NVME_QID_ANY
	nvme_alloc_request()
nvme_delete_queue()		NVME_QID_ANY
	nvme_alloc_request()
nvmet_passthru_execute_cmd()	NVME_QID_ANY
	nvme_alloc_request()
nvmf_connect_io_queue() 	QID
	__nvme_submit_sync_cmd()
		nvme_alloc_request()

With passthru nvme_alloc_request() now falls into the I/O fast path such
that blk_mq_alloc_request_hctx() is never gets called and that adds
additional branch check in fast path.

Split the nvme_alloc_request() into nvme_alloc_request() and
nvme_alloc_request_qid().

Replace each call of the nvme_alloc_request() with NVME_QID_ANY param
with a call to newly added nvme_alloc_request() without NVME_QID_ANY.

Replace a call to nvme_alloc_request() with QID param with a call to
newly added nvme_alloc_request() and nvme_alloc_request_qid()
based on the qid value set in the __nvme_submit_sync_cmd().
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is purely a clenaup patch, add prefix NVME to the ADMIN_TIMEOUT to
make consistent with NVME_IO_TIMEOUT.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function nvme_alloc_request() is called from different context
(I/O and Admin queue) where callers do not consider the I/O timeout when
called from I/O queue context.

Update nvme_alloc_request() to set the default I/O and Admin timeout
value based on whether the queuedata is set or not.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use the block layer helper to update both the disk and block device
sizes.  Contrary to the name no notification is sent in this case,
as a size 0 is special cased.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The update_bdev argument is always set to true, so remove it.  Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is no good reason to call revalidate_disk_size separately.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

xa_destroy() frees only internal data. The caller is responsible for
freeing the exteranl objects referenced by an xarray.

Fixes: 1cf7a12e ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the struct used for tracking known command effects logs in a
list. This is now saved in an xarray that doesn't use these elements.
Instead, store the log directly instead of the wrapper struct.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.

Fixes: 1293477f ("nvme: set gendisk read only based on nsattr")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Revalidating nvme zoned namespaces requires IO commands, and there are
controller states that prevent IO. For example, a sanitize in progress
is required to fail all IO, but we don't want to remove a namespace
we've previously added just because the controller is in such a state.
Suppress the error in this case.
Reported-by: NMichael Nguyen <michael.nguyen@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Translate zoned resource errors to the appropriate blk_status_t.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In nvme_set_queue_limits() we initialize vwc to false and later add
a condition to set vwc true. The value of the vwc can be declare
initialized which makes all the blk_queue_XXX() calls uniform.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In nvme_validate_ns() the exra variable ctrl is used only twice.
Using ns->ctrl directly still maintains the redability and original
length of the lines in the code. Get rid of the extra variable ctrl &
use ns->ctrl directly.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Just fold it into the only caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Move the logic to revalidate the block_device size or remove the
namespace from the caller into nvme_validate_ns.  This removes
the return value and thus the status code translation.  Additionally
it also catches non-permanent errors from nvme_update_ns_info using
the existing logic.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Move nvme_validate_ns just above its only remaining caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Check the namespace identifier list first thing when scanning namespaces.
This keeps the code to query the CSI common between the alloc and validate
path, and helps to structure the code better for multiple command set
support.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>

Consolidate the two calls into a single place.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>