The video buffer is not uncached memory-mapped I/O, so don't tag the virtual
address as __iomem.  It's also not a u8*.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Uninstalling the framebuffers in reverse order is unnecessary and makes
the for-loop awkward.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

We were forgetting to unmap the video memory if fsl_diu_check_var() fails.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

It makes no sense to limit the size of a strncpy() to the length of
the source string.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Use the name "fsl-diu-fb" in the Freescale DIU framebuffer driver
during registrations.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Clean up the local variable usage in request_irq_local() and allocate_buf().
This streamlines the code without affecting functionality.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The framebuffer layer already uses the first video mode defined in the
fb_videomode array as a default, so there's no need to duplicate the
first entry into a stand-alone structure.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Implement various improvements to the way the Freescale DIU framebuffer
driver access the device tree.

1) Use of_iomap() instead of of_address_to_resource() and ioremap()

2) Use be32_to_cpup() instead of directly dereferencing the device_node
   pointer.

3) Rename variable 'ofdev' to 'pdev' to avoid any confusion that it's
   a platform_device pointer, not an of_device pointer (of_device no
   longer exists).
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Fix this compilation warning in the Freescale DIU framebuffer driver:

warning: 'dummy_ad_addr' may be used uninitialized in this function
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Remove some unused ioctl commands, and treat those commands as unsupported
instead of ignored.

Also remove struct mfb_alpha, which isn't used by any ioctl.  It may have
been once intended for MFB_SET_ALPHA, but that ioctl uses a different
data structure.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Remove debug printk messages (they don't help in debugging), replace
printk(KERN_xxx with its pr_xxx or dev_xxx equivalent, and add a couple
missing error messages.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Fix various indentation and line length problems in the Freescale
DIU framebuffer driver.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch:
	-- Adds s3c_fb_driverdata for S5P64X0, which supports 3 windows.
	-- Also, register "s5p64x0-fb" type driver_data.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Fix the incorrect indentation in functions fb_try_mode() and fb_find_mode().
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The function duplicates code found in sh_mobile_check_var(). Remove
sh_mobile_lcdc_set_bpp() and call sh_mobile_check_var() instead.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Move channel initialization to sh_mobile_lcdc_channel_init() and call
the function from sh_mobile_lcdc_probe(). This makes the code more
readable and prepares it for fix/var initialization rework.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Reorder probe/remove functions to avoid forward declarations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Instead of updating the fixed screen information line length manually
after calling fb_set_var() in sh_mobile_fb_reconfig(), update the field
in the .fb_set_par() operation handler.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

We must not use any information in the passed var besides xoffset,
yoffset and vmode as otherwise applications might abuse it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Implement .fb_set_par to support frame buffer format changes at runtime.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Instead of failing when the requested fb_var_screeninfo parameters are
not supported, adjust the parameters according to the hardware
capabilities.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

When ICBs are unregistered and later reused they need to be reset to
avoid data corruption. Set the WBF, WF and RF bits to make sure ICBs get
reset properly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds framebuffer suport for SMSC's UFX6000 (USB 2.0) and
UFX7000 (USB 3.0) display adapters.
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Following on Herton's patch "fb: avoid possible deadlock caused by
fb_set_suspend" which moves lock_fb_info() out of fb_set_suspend()
to its callers, correct sh-mobile's locking around call to
fb_set_suspend() and the same sort of deaklocks with console_lock()
due to order of taking the lock.

console_lock() must be taken while fb_info is already locked and fb_info
must be locked while calling fb_set_suspend().
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@kernel.org

A lock ordering issue can cause deadlocks: in framebuffer/console code,
all needed struct fb_info locks are taken before acquire_console_sem(),
in places which need to take console semaphore.

But fb_set_suspend is always called with console semaphore held, and
inside it we call lock_fb_info which gets the fb_info lock, inverse
locking order of what the rest of the code does. This causes a real
deadlock issue, when we write to state fb sysfs attribute (which calls
fb_set_suspend) while a framebuffer is being unregistered by
remove_conflicting_framebuffers, as can be shown by following show
blocked state trace on a test program which loads i915 and runs another
forked processes writing to state attribute:

Test process with semaphore held and trying to get fb_info lock:
..
fb-test2      D 0000000000000000     0   237    228 0x00000000
 ffff8800774f3d68 0000000000000082 00000000000135c0 00000000000135c0
 ffff880000000000 ffff8800774f3fd8 ffff8800774f3fd8 ffff880076ee4530
 00000000000135c0 ffff8800774f3fd8 ffff8800774f2000 00000000000135c0
Call Trace:
 [<ffffffff8141287a>] __mutex_lock_slowpath+0x11a/0x1e0
 [<ffffffff814142f2>] ? _raw_spin_lock_irq+0x22/0x40
 [<ffffffff814123d3>] mutex_lock+0x23/0x50
 [<ffffffff8125dfc5>] lock_fb_info+0x25/0x60
 [<ffffffff8125e3f0>] fb_set_suspend+0x20/0x80
 [<ffffffff81263e2f>] store_fbstate+0x4f/0x70
 [<ffffffff812e7f70>] dev_attr_store+0x20/0x30
 [<ffffffff811c46b4>] sysfs_write_file+0xd4/0x160
 [<ffffffff81155a26>] vfs_write+0xc6/0x190
 [<ffffffff81155d51>] sys_write+0x51/0x90
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..
modprobe process stalled because has the fb_info lock (got inside
unregister_framebuffer) but waiting for the semaphore held by the
test process which is waiting to get the fb_info lock:
..
modprobe      D 0000000000000000     0   230    218 0x00000000
 ffff880077a4d618 0000000000000082 0000000000000001 0000000000000001
 ffff880000000000 ffff880077a4dfd8 ffff880077a4dfd8 ffff8800775a2e20
 00000000000135c0 ffff880077a4dfd8 ffff880077a4c000 00000000000135c0
Call Trace:
 [<ffffffff81411fe5>] schedule_timeout+0x215/0x310
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff814130dd>] __down+0x6d/0xb0
 [<ffffffff81089f71>] down+0x41/0x50
 [<ffffffff810629ac>] acquire_console_sem+0x2c/0x50
 [<ffffffff812ca53d>] unbind_con_driver+0xad/0x2d0
 [<ffffffff8126f5f7>] fbcon_event_notify+0x457/0x890
 [<ffffffff814144ff>] ? _raw_spin_unlock_irqrestore+0x1f/0x50
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff8141836d>] notifier_call_chain+0x4d/0x70
 [<ffffffff8108a3b8>] __blocking_notifier_call_chain+0x58/0x80
 [<ffffffff8108a3f6>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff8125dabb>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff8125e6ac>] unregister_framebuffer+0x7c/0x130
 [<ffffffff8125e8b3>] remove_conflicting_framebuffers+0x153/0x180
 [<ffffffff8125eef3>] register_framebuffer+0x93/0x2c0
 [<ffffffffa0331112>] drm_fb_helper_single_fb_probe+0x252/0x2f0 [drm_kms_helper]
 [<ffffffffa03314a3>] drm_fb_helper_initial_config+0x2f3/0x6d0 [drm_kms_helper]
 [<ffffffffa03318dd>] ? drm_fb_helper_single_add_all_connectors+0x5d/0x1c0 [drm_kms_helper]
 [<ffffffffa037b588>] intel_fbdev_init+0xa8/0x160 [i915]
 [<ffffffffa0343d74>] i915_driver_load+0x854/0x12b0 [i915]
 [<ffffffffa02f0e7e>] drm_get_pci_dev+0x19e/0x360 [drm]
 [<ffffffff8141821d>] ? sub_preempt_count+0x9d/0xd0
 [<ffffffffa0386f91>] i915_pci_probe+0x15/0x17 [i915]
 [<ffffffff8124481f>] local_pci_probe+0x5f/0xd0
 [<ffffffff81244f89>] pci_device_probe+0x119/0x120
 [<ffffffff812eccaa>] ? driver_sysfs_add+0x7a/0xb0
 [<ffffffff812ed003>] driver_probe_device+0xa3/0x290
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ed29b>] __driver_attach+0xab/0xb0
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ebd3e>] bus_for_each_dev+0x5e/0x90
 [<ffffffff812ecc2e>] driver_attach+0x1e/0x20
 [<ffffffff812ec6f2>] bus_add_driver+0xe2/0x320
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff812ed536>] driver_register+0x76/0x140
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff81245216>] __pci_register_driver+0x56/0xd0
 [<ffffffffa02f1264>] drm_pci_init+0xe4/0xf0 [drm]
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffffa02e84a8>] drm_init+0x58/0x70 [drm]
 [<ffffffffa03aa094>] i915_init+0x94/0x96 [i915]
 [<ffffffff81002194>] do_one_initcall+0x44/0x190
 [<ffffffff810a066b>] sys_init_module+0xcb/0x210
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..

fb-test2 which reproduces above is available on kernel.org bug #26232.
To solve this issue, avoid calling lock_fb_info inside fb_set_suspend,
and move it out to where needed (callers of fb_set_suspend must call
lock_fb_info before if needed). So far, the only place which needs to
call lock_fb_info is store_fbstate, all other places which calls
fb_set_suspend are suspend/resume hooks that should not need the lock as
they should be run only when processes are already frozen in
suspend/resume.

References: https://bugzilla.kernel.org/show_bug.cgi?id=26232Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@kernel.org

it's annoying and takes up way too much space in dmesg.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Increase delay when polling for tx status. This fixes
the unreliable video decoder i2c register access.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The standard timings parses uses 1:1 dimensions when the ratio in the
EDID data is 0. However, for EDID 1.3 and later the dimensions are 16:10
when the ratio is 0.

Pass the version and revision numbers to get_std_timing() which can then
make the right decision about dimensions.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Since commit aa3831cf
"ARM: Consolidate the clkdev header files",
the header file arch/arm/mach-nuc93x/include/mach/clkdev.h is removed.

This patch fixes below build error:

drivers/video/nuc900fb.c:42:25: error: mach/clkdev.h: No such file or directory
make[2]: *** [drivers/video/nuc900fb.o] Error 1
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Include linux/module.h to fix below build error:

                 from drivers/video/mxsfb.c:42:
arch/arm/mach-mxs/include/mach/memory.h:22:1: warning: this is the location of the previous definition
drivers/video/mxsfb.c:574: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/video/mxsfb.c:893: warning: data definition has no type or storage class
drivers/video/mxsfb.c:893: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE'
drivers/video/mxsfb.c:893: warning: parameter names (without types) in function declaration
drivers/video/mxsfb.c:917: error: expected declaration specifiers or '...' before string constant
drivers/video/mxsfb.c:917: warning: data definition has no type or storage class
drivers/video/mxsfb.c:917: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/video/mxsfb.c:917: warning: function declaration isn't a prototype
drivers/video/mxsfb.c:918: error: expected declaration specifiers or '...' before string constant
drivers/video/mxsfb.c:918: warning: data definition has no type or storage class
drivers/video/mxsfb.c:918: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/video/mxsfb.c:918: warning: function declaration isn't a prototype
drivers/video/mxsfb.c:919: error: expected declaration specifiers or '...' before string constant
drivers/video/mxsfb.c:919: warning: data definition has no type or storage class
drivers/video/mxsfb.c:919: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/video/mxsfb.c:919: warning: function declaration isn't a prototype
make[2]: *** [drivers/video/mxsfb.o] Error 1
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x into fbdev-next

Conflicts:
	drivers/video/atmel_lcdfb.c

This patch adds struct s3c_fb_driverdata s3c_fb_data_exynos4 for EXYNOS4
and adds lcd clock gating support.

FIMD driver needs two clocks for FIMD IP and LCD pixel clock. Previously,
both clocks are provided by using bus clock such as HCLK. However, EXYNOS4
can not select HCLK for LCD pixel clock because the EXYNOS4 FIMD IP does not
have the CLKSEL bit of VIDCON0. So, FIMD driver should provide the lcd clock
using SCLK_FIMD as LCD pixel clock for EXYNOS4.

The driver selects enabling lcd clock according to has_clksel which means
the CLKSEL bit of VIDCON0. If there is has_clksel, the driver will not
enable the lcd clock using SCLK_FIMD because bus clock using HCLK is used
a LCD pixel clock.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Enables page fault based detection of mmap writes to the framebuffer,
which allows standard fbdev apps (like the generic fbdev xorg driver)
to work on DisplayLink devices.

Not all bugs are shaken out of the fb_defio path of udlfb, but it's
tantalizingly close, so this seems a good time to enable by default.

Alternatively, option can be disabled when running with an xorg driver
that can more directly communicate damaged regions of the framebuffer
via IOCTL. This is a simpler, higher perf option, when available.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

By default, udlfb allocates a 2nd buffer to shadow what's across
the bus on the USB device.  It can operate without this shadow,
but then it cannot tell which pixels have changed, and must send all.

Saves host memory, but worsens the USB 2.0 bus bottleneck.

This option allows users in very low memory situations (e.g.
bifferboard) to optionally turn off this shadow framebuffer.
Signed-off-by: NStuart Hopkins <stuart@linux-depot.com>
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Add __user casting, a missing copy_from_user, and proper boolean
Signed-off-by: NDr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

For at least one DisplayLink device, the vendor-specific information can
be found in the config descriptor instead of as a separate, device-level
descriptor.  This patch searches the current interface (of the current
config descriptor) for the DL vendor-specific descriptor.
Signed-off-by: NAndrew Kephart <akephart@akephart.org>
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Fixes earlier problems where monitor would not return from blank

Test with any DisplayLink-based USB 2.0 graphics adapter
sudo nano /sys/class/graphics/fb?/blank
and write out single digit FB_BLANK_* code from include/linux/fb.h

Supports on (0), blank (1), suspend (2,3), powerdown (4)
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>