This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:

    [drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.

Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:

    attributes.pitch = attributes.width;

In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSimon Ser <contact@emersion.fr>
Reported-by: NPierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Update init soc bounding box and bw bounding box for DCN3.01.
Remove pp smu interface which isn't used.

v2: squash in removal of stable function definition (Alex)
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Cached backlight is never being updated since panel_cntl specific
registers were moved from abm to panel_cntl.

[How]
Update cached backlight in set_abm_immediate_disable as what we used to
do. Also, update the priority of backlight restore mechanism so that
cached backlight has the highest priority since it is always correct.
Signed-off-by: NCamille Cho <Camille.Cho@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
ASIC requirement.

[how]
Make disable_*_power_gate to false.
Signed-off-by: NSung Joon Kim <sungjoon.kim@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The GAMCOR memory blocks should be powered down when they're not in use.
This will reduce power consumption.

[How]
Write to GAMCOR_MEM_PWR_FORCE to put memory to shutdown
when GAMCOR is not used.
Signed-off-by: NJacky Liao <ziyu.liao@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Remove temp macro since the enum is in header file already.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
only apply multiple display power optimization in case there are more
than one internal display.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Get internal display info from vbios and pass it to dmub fw to determine
if multiple display optmization is needed.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The BLNDGAM memory blocks should be powered down when they're not in
use. This will reduce power consumption.

[How]
1. Write to BLNDGAM_MEM_PWR_FORCE to put memory to shutdown when BLNDGAM
   is not used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: NJacky Liao <ziyu.liao@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need to clear sticky error bits generated during hpd irq from receiver.

[How]
Clear sticky vsc sdp error bit.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
t9 delay func is called twice after setting power off, the unexpected
action results in a doubling of the added 140ms t9 delay

[How]
If the backlight has been turned off, does not turn it off again
Signed-off-by: NSherry <Yao.Wang1@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The MPCC may change and request data when the pipes are switching from 2
to 1 or 1 to 2. During the switch there is a possibility of underflow
and flicker/missing data.

[How]
During VBlank the MPCC won't request data. The trick is to delay and
wait on VBlank, ONLY when pipes are either turning on or off, right
before MPCC is reset for the pipes.
Signed-off-by: NTashfique Abdullah <tabdullah@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
On some platforms, DMCU is no longer used. In these cases, some DMCU
memory should be completely powered off to save power.

[How]
1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in
   use
2. Added a debug option to allow this behaviour to be turned off
3. Set all memory low power debug options to off first, to not
   immediately cause problems
Signed-off-by: NJacky Liao <ziyu.liao@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Enable stutter for DCN3.01.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Incorrect panel register settings are applied for power sequence because
the register macro is not defined in resource.

[How]
Implement same register space to future resource files.
Signed-off-by: NChris Park <Chris.Park@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some sink devices wish to have access to the minimum HBlank supported by
the ASIC.

[How]
Make the ASIC minimum HBlank available in Source Device information
address 0x340.
Signed-off-by: NAshley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.

[how]
slower down the HW i2c speed when used by HW i2c.
this request: each acquired_i2c_engine setup the i2c speed needed.
and set the I2c engine for HDCP use at release_engine.

this covers SW using HW I2c engine and HDCP using HW I2c engine. for
dmcu using HW I2c engine, needs add similar logic in dmcufw.
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dpcs reg are missing for dcn302 link encoder regs list, so add them.
Just like dcn3
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
These comments are helpful in understanding which case each if
statement handles.

[How]
Add comments for state transitions (9 possible cases)
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We call add display multiple times because DESIRED->ENABLED cannot
happen instantaneously. We can't compare the new_state/old_state to
avoid this because on unplug we set the state to DESIRED and on hotplug
the state will still be DESIRED.

[How]
Add a flag to dm_connector_state to keep track of when to enable or
disable HDCP
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit 6d90a208
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:

 amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
 WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
 ...
 RIP:
 0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
 [drm]
 ...
 Call Trace:
  ? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
  drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
  drm_get_last_vbltimestamp+0xad/0xc0 [drm]
  drm_reset_vblank_timestamp+0x63/0xd0 [drm]
  drm_crtc_vblank_on+0x85/0x150 [drm]
  amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
  commit_tail+0x99/0x130 [drm_kms_helper]
  drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
  amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
  drm_atomic_commit+0x4a/0x50 [drm]
  drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
  drm_mode_setcrtc+0x20b/0x7e0 [drm]
  ? tomoyo_path_number_perm+0x6f/0x200
  ? drm_mode_getcrtc+0x190/0x190 [drm]
  drm_ioctl_kernel+0xae/0xf0 [drm]
  drm_ioctl+0x245/0x400 [drm]
  ? drm_mode_getcrtc+0x190/0x190 [drm]
  amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
  __x64_sys_ioctl+0x91/0xc0
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 ...

For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Update bounding box as per spread sheet.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NRoman Li <roman.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
After removing added latency for HostVM by default, DDR4 sr exit
latencies were no longer large enough for some panels and caused
underflow.

[How]
Add 1us to sr enter/exit watermark.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We should use int for counting variable

[How]
Change type from bool to uint32_t
Signed-off-by: NRaymond Yang <rayyang@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Instead of calculating CRC on whole frame, add flexibility to calculate
CRC on specific frame region.

[How]
Add few crc window coordinate properties. By default, CRC is calculated
on whole frame unless user space specifies the CRC calculation window.
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Add a dual edp power optimization flag, so driver will
notify this flag to dmub FW to determine if apply the
power optimization.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Blue screen when PNP with multiple monitor or hotplug external monitor when playing video
due to dpp dto isn't programmed properly.
If lower dpp clock, dpp dto need to be programmed first, and actual dpp clk not avalable yet.

[How]
set dpp dto as per request clk for lower case before dpp clk update, and after dpp clk updated
set dpp dto again with actual dpp clk.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The I2C memory blocks should be powered down when they are not in use.
This will reduce power consumption.

[How]
1. Write to I2C_LIGHT_SLEEP_FORCE to put memory in light sleep when
   released
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: NJacky Liao <ziyu.liao@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Check if the eDP sink supports the dynamic backlight control

[How]
Query the dynamic backlight capability in DPCD (eDP case only)
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Cursor is missing on displays 2 and up when doing rotated
 display groups in 1xnY setup.  Calculation puts cursor
 out of bounds so it is not enabled.

[How]
In dcn10_set_cursor_position(), add in viewport.y into cursor
 calculations for 1xnY rotated display groups.
For pipe split, check viewport.y for both pipes and use lower one
 to normalize cursor position before calculations.
Add odm 2:1 support ( using same calculations as pipe split ).
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Currently if VBIOSSMC_Result_UnknownCmd is returned as result of smu msg
there is no way to know.  Put 1 in param so if 1 is returned, this unknown case is handled.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If the system does not have hostvm enabled, disabling it for
DML validation will allow more modes to pass at lower voltage
levels.

[How]
When initializing HostVM save state to hubbub and read back
when populating DML pipes from context.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>