- 15 11月, 2019 34 次提交
-
-
由 Stefano Garzarella 提交于
In a nested VM environment, we have to refuse to assign to a nested guest the same CID assigned to our guest->host transport. In this way, the user can use the local CID for loopback. Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Garzarella 提交于
This patch adds 'module' member in the 'struct vsock_transport' in order to get/put the transport module. This prevents the module unloading while sockets are assigned to it. We increase the module refcnt when a socket is assigned to a transport, and we decrease the module refcnt when the socket is destructed. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NJorgen Hansen <jhansen@vmware.com> Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Garzarella 提交于
To allow other transports to be loaded with vmci_transport, we register the vmci_transport as G2H or H2G only when a VMCI guest or host is active. To do that, this patch adds a callback registered in the vmci driver that will be called when the host or guest becomes active. This callback will register the vmci_transport in the VSOCK core. Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Garzarella 提交于
This patch adds the support of multiple transports in the VSOCK core. With the multi-transports support, we can use vsock with nested VMs (using also different hypervisors) loading both guest->host and host->guest transports at the same time. Major changes: - vsock core module can be loaded regardless of the transports - vsock_core_init() and vsock_core_exit() are renamed to vsock_core_register() and vsock_core_unregister() - vsock_core_register() has a feature parameter (H2G, G2H, DGRAM) to identify which directions the transport can handle and if it's support DGRAM (only vmci) - each stream socket is assigned to a transport when the remote CID is set (during the connect() or when we receive a connection request on a listener socket). The remote CID is used to decide which transport to use: - remote CID <= VMADDR_CID_HOST will use guest->host transport; - remote CID == local_cid (guest->host transport) will use guest->host transport for loopback (host->guest transports don't support loopback); - remote CID > VMADDR_CID_HOST will use host->guest transport; - listener sockets are not bound to any transports since no transport operations are done on it. In this way we can create a listener socket, also if the transports are not loaded or with VMADDR_CID_ANY to listen on all transports. - DGRAM sockets are handled as before, since only the vmci_transport provides this feature. Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Garzarella 提交于
virtio_transport and vmci_transport handle the buffer_size sockopts in a very similar way. In order to support multiple transports, this patch moves this handling in the core to allow the user to change the options also if the socket is not yet assigned to any transport. This patch also adds the '.notify_buffer_size' callback in the 'struct virtio_transport' in order to inform the transport, when the buffer_size is changed by the user. It is also useful to limit the 'buffer_size' requested (e.g. virtio transports). Acked-by: NDexuan Cui <decui@microsoft.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NJorgen Hansen <jhansen@vmware.com> Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefano Garzarella 提交于
We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Subbaraya Sundeep 提交于
Traffic for a CGX mapped NIXLF can be stopped by disabling entries in NPC MCAM or by configuring CGX and mailbox messages exist for the two options. If traffic is stopped at CGX then VFs of that PF are also effected hence CGX traffic should be started/stopped by tracking all the users of it. This patch implements that CGX users tracking. CGX is also configured along with NPC if required. Also removed a check which mandates even number of LBK VFs. Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
A config option is added to disable caching of dynamic entries like SQEs and stack pages. Also locks down all HW contexts in NDC, preventing them from being evicted. This option is useful when the queue count is large and there are huge NDC cache misses. It's trade off between SQ context misses and dynamically changing entries like SQE and stack page pointers. Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geetha sowjanya 提交于
Each of the NIX/NPA LFs can choose which ways of their respective NDC caches should be used to cache their contexts. This enables flexible configurations like disabling caching for a LF, limiting it's context to a certain set of ways etc etc. Separate way_mask for NIX-TX and NIX-RX is not supported. Signed-off-by: NGeetha sowjanya <gakula@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
Ingress packet replication support has been added to 96xx B0 silicon. This patch enables using that feature to replicate ingress broadcast packets to PF and it's VFs. Also fixed below issues - VFs can also install NPC MCAM entry to forward broadcast pkts. Otherwise, unless PF's interface is UP, VFs will not receive bcast packets. - NPC MCAM entry is disabled when PF and all it's VFs are down. - Few corner cases in installing multicast entry list. Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
CN96xx initial silicon doesn't support all features pertaining to NIX transmit scheduling and shaping. - It supports a fixed topology of 1:1 mapped transmit limiters at all levels. - Supports DWRR only at SMQ/MDQ and TL1. - Doesn't support shaping and coloring. This patch adds HW capability structure by which each variant and skew of silicon can be differentiated by their supported features. And adds support for A0 silicon's transmit scheduler capabilities or rather limitations. Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kiran Kumar K 提交于
This patch adds support for few more RSS key types for flow key algorithm to compute rss hash index. Following flow key types have been added. - Tunnel types like NVGRE, VXLAN, GENEVE. - L2 offload type ETH_DMAC, Here we will consider only DMAC 6 bytes. - And extension header IPV6_EXT (1 byte followed by IPV6 header - Hashing inner protocol fields for inner DMAC, IPv4/v6, TCP, UDP, SCTP. Signed-off-by: NKiran Kumar K <kirankumark@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Dabilpuram 提交于
Writing into NPC MCAM1 and MCAM0 registers are suppressed if they happened to form a reserved combination. Hence clear and disable MCAM entries before update. For HRM: [CAM(1)]<n>=1, [CAM(0)]<n>=1: Reserved. The reserved combination is not allowed. Hardware suppresses any write to CAM(0) or CAM(1) that would result in the reserved combination for any CAM bit. Signed-off-by: NNithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hao Zheng 提交于
Updated NPC KPU packet parsing profile with support for following - Fragmentation support for IPv4 IPv6 outer header - NIX instruction header support - QinQ with TPID of 0x8100 as non inner most vlan tag, as legacy network equipments still generate QinQ packets with this configuration. - To better support RSS for tunnelled packets, udp based tunnel protocols such as vxlan, vxlan-gpe, geneve and gtpu are now captured into a separate layer E. Consequently, the inner packet headers are pushed one layer down to LF, LG, and LH accordingly. - Support for rfc7510 mpls in udp. Up to 4 MPLS labels can be parsed and captured in one layer LE. - Parser support for DSA, extended DSA and eDSA tags right after ethernet header by Marvell SOHO and Falcon switches. For extended DSA and eDSA tags, a special PKIND of 62 is used, as these tags don't contain a tpid field. - Higig2 protocol header parsing support, added a NPC_LT_LA_HIGIG2_ETHER for a combined header of HIGIG2 and Ethernet. Add a NPC_LT_LA_IH_NIX_HIGIG2_ETHER for a combined header of nix_ih, HIGIG2 and Ethernet on egress side. Also added 2 upper flags in LA to indicate the presence of nix_ih and HIGIG2. Other changes include - IPv4.TTL==0 IPv6.HLIM==0 check - Per RFC 1858, mark fragment offset == 1 as error - TCP invalid flags check - Separate error codes for outer and inner IPv4 checksum errors. - Fix a parser error when KPU parses incoming IPSec ESP and AH packets - NPC vtag capture/strip hardware expect tag pointer to point to tpid/ethertype instead of tci. So move lb_ptr to point to tpid/ethertype. - Fix npc parser error when parsing udp packets that don't have any payload. - For a single MCAM entry to match on packets with one or stacked vlan tags combine NPC_LT_LB_STAG and NPC_LT_LB_QINQ to NPC_LT_LB_STAG_QINQ. - NVGRE to have a separate ltype LD_NVGRE instead of combined with LD_GRE. - Reserve top LD/LTYPEs to support custom KPU profile fields. Signed-off-by: NHao Zheng <haoz@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Subbaraya Sundeep 提交于
For every mailbox handler added to rvu, we are adding a function declaration in rvu header file. Cleaned this up by adding a macro to generate these declarations automatically. Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geetha sowjanya 提交于
If mailbox client has a bounce buffer or a intermediate buffer where mbox messages are framed then copy them from there to HW buffer. If 'mbase' and 'hw_mbase' are not same then assume 'mbase' points to bounce buffer. This patch also adds msg_size field to mbox header to copy only valid data instead of whole buffer. Signed-off-by: NGeetha sowjanya <gakula@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
Added a new mailbox API which goes through all responses to check their IDs and response codes. Also added logic to prevent queuing multiple works to process the same mailbox message. This scenario happens when AF is processing a PF's request and menawhile PF sends ACK to AF sent UP message, then mbox_hdr->num_msgs in the PF->AF DOWN mbox region will be nonzero and AF will end up processing PF's request again. This is fixed by taking a backup of num_msgs counter and clearing the same in the mbox region before scheduling work. Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
Added support to display current NPC MCAM entries and counter's allocation status ín debugfs. cat /sys/kernel/debug/octeontx2/npc/mcam_info' will dump following info - MCAM Rx and Tx keysize - Total MCAM entries and counters - Current available count - Count of number of MCAM entries and counters allocated by a RVU PF/VF device. Also, one NPC MCAM counter (last one) is reserved and mapped to NPC RX_INTF's MISS_ACTION to count dropped packets due to no MCAM entry match. This pkt drop counter can be checked via debugfs. Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linu Cherian 提交于
A CGX port is shared by a RVU PF and it's VFs. These per CGX port level NIX Rx/Tx counters are cumilative stats of all NIXLFs sharing this port. These stats when compared to CGX Rx/Tx stats helps in identifying pkts dropped within the system, if any. Signed-off-by: NLinu Cherian <lcherian@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prakash Brahmajyosyula 提交于
This patch adds CGX LMAC physical interface or serdes Rx/Tx packet stats to debugfs. 'cat cgx<idx>/lmac<idx>/stats' dumps the current interface link status and Rx/Tx stats. Stats include pkt received/transmitted, dropped, pause frames etc etc. Signed-off-by: NPrakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: NLinu Cherian <lcherian@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prakash Brahmajyosyula 提交于
NDC is a data cache unit which caches NPA and NIX block's aura/pool/RQ/SQ/CQ/etc contexts to reduce number of costly DRAM accesses. This patch adds support to dump cache's performance stats like cache line hit/miss counters, average cycles taken for accessing cached and non-cached data. This will help in checking if NPA/NIX context reads/writes are having NDC cache misses which inturn might effect performance. Also changed NDC enums to reflect correct NDC hardware instance. Signed-off-by: NPrakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: NLinu Cherian <lcherian@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prakash Brahmajyosyula 提交于
To aid in debugging NIX block related issues, added support to dump NIX block LF's RQ, SQ and CQ hardware contexts in debugfs. User can check which contexts are enabled currently and dump it's current HW context. Four new files 'qsize', 'rq_ctx', 'sq_ctx' and 'cq_ctx' are added to the debugfs at 'sys/kernel/debug/octeontx2/nix/' 'echo <nixlf index> > qsize' will display current enabled CQ/SQ/RQs. 'echo <nixlf> [rq number/all] > rq_ctx', 'echo <nixlf> [sq number/all] > sq_ctx' & 'echo <nixlf> [cq number/all] > cq_ctx' will dump RQ/SQ/CQ's current hardware context. Signed-off-by: NPrakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christina Jacob 提交于
To aid in debugging NPA related issues, added support to dump NPA (pool allocator) block LF's aura and pool hardware contexts in debugfs. User can check which contexts are enabled currently and dump it's current HW context. Three new files 'qsize', 'aura_ctx', 'pool_ctx' are added to the debugfs at 'sys/kernel/debug/octeontx2/npa/' 'echo <npalf index> > qsize' will display current enabled Aura/Pools. 'echo <npalf> [aura number/all] > aura_ctx' & 'echo <npalf> [aura number/all] > pool_ctx' will dump Aura/Pool context info. Signed-off-by: NChristina Jacob <cjacob@marvell.com> Signed-off-by: NPrakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christina Jacob 提交于
Added support to dump current resource provisioning status of all resource virtualization unit (RVU) block's (i.e NPA, NIX, SSO, SSOW, CPT, TIM) local functions attached to a PF_FUNC into a debugfs file. 'cat /sys/kernel/debug/octeontx2/rsrc_alloc' will show the current block LF's allocation status. Signed-off-by: NChristina Jacob <cjacob@marvell.com> Signed-off-by: NPrakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Bianconi 提交于
Fix build_skb for bm capable devices when they fall-back using swbm path (e.g. when bm properties are configured in device tree but CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is overwritten so we need to use it building skb instead of MVNETA_SKB_HEADROOM directly Fixes: 8dc9a088 ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine") Fixes: 0db51da7 ("net: mvneta: add basic XDP support") Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org> Reported-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Use r8168d_modify_extpage() also in rtl8168f_config_eee_phy() to simplify the code. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cris Forno 提交于
Currently, when ibmveth receive a loopback packet, it reports an ambiguous error message "tx: h_send_logical_lan failed with rc=-4" because the hypervisor rejects those types of packets. This fix detects loopback packet and assures the source packet's MAC address matches the driver's MAC address before transmitting to the hypervisor. Signed-off-by: NCris Forno <cforno12@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Murphy 提交于
Add support for the TI DP83869 Gigabit ethernet phy device. The DP83869 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: NDan Murphy <dmurphy@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 MarkLee 提交于
Enable GDM GDMA_DROP_ALL mode to drop all packet during the stop operation. This is recommended by the mt762x HW design to drop all packet from GMAC before stopping PDMA. Signed-off-by: NMarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 MarkLee 提交于
Refine the timing of GDM/PSE setup, move it from mtk_hw_init to mtk_open. This is recommended by the mt762x HW design to do GDM/PSE setup only after PDMA has been started. We exclude mt7628 in mtk_gdm_config function since it is a old IP and there is no GDM/PSE block on it. Signed-off-by: NMarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 MarkLee 提交于
Integrate GDM/PSE setup operations into single function "mtk_gdm_config" Signed-off-by: NMarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
We don't really need 10k species of reset. Remove everything except cold reset which is what is actually used. Too bad the hardware designers couldn't agree to use the same bit field for rev 1 and rev 2, so the (*reset_cmd) function pointer is there to stay. However let's simplify the prototype and give it a struct dsa_switch (we want to avoid forward-declarations of structures, in this case struct sja1105_private, wherever we can). Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
Tested using the following bash script and the tc from iproute2-next: #!/bin/bash set -e -u -o pipefail NSEC_PER_SEC="1000000000" gatemask() { local tc_list="$1" local mask=0 for tc in ${tc_list}; do mask=$((${mask} | (1 << ${tc}))) done printf "%02x" ${mask} } if ! systemctl is-active --quiet ptp4l; then echo "Please start the ptp4l service" exit fi now=$(phc_ctl /dev/ptp1 get | gawk '/clock time is/ { print $5; }') # Phase-align the base time to the start of the next second. sec=$(echo "${now}" | gawk -F. '{ print $1; }') base_time="$(((${sec} + 1) * ${NSEC_PER_SEC}))" tc qdisc add dev swp5 parent root handle 100 taprio \ num_tc 8 \ map 0 1 2 3 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time ${base_time} \ sched-entry S $(gatemask 7) 100000 \ sched-entry S $(gatemask "0 1 2 3 4 5 6") 400000 \ clockid CLOCK_TAI flags 2 The "state machine" is a workqueue invoked after each manipulation command on the PTP clock (reset, adjust time, set time, adjust frequency) which checks over the state of the time-aware scheduler. So it is not monitored periodically, only in reaction to a PTP command typically triggered from a userspace daemon (linuxptp). Otherwise there is no reason for things to go wrong. Now that the timecounter/cyclecounter has been replaced with hardware operations on the PTP clock, the TAS Kconfig now depends upon PTP and the standalone clocksource operating mode has been removed. Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
The PTPSTRTSCH and PTPSTOPSCH bits are actually readable and indicate whether the time-aware scheduler is running or not. We will be using that for monitoring the scheduler in the next patch, so refactor the PTP command API in order to allow that. Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2019 6 次提交
-
-
由 Dan Carpenter 提交于
"ret" is zero or possibly uninitialized on this error path. It should be a negative error code instead. Fixes: 2d0cb84d ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
irqreturn_t type is an enum and in this context it's unsigned, so "err" can't be irqreturn_t or it breaks the error handling. In fact the "err" variable is only used to store integers (never irqreturn_t) so it should be declared as int. I removed the initialization because it's not required. Using a bogus initializer turns off GCC's uninitialized variable warnings. Secondly, there is a GCC warning about unused assignments and we would like to enable that feature eventually so we have been trying to remove these unnecessary initializers. Fixes: 7b0c342f ("net: atlantic: code style cleanup") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Duvvuru 提交于
Fix the array overrun while keeping the eth_addr and eth_addr_mask pointers as u16 to avoid unaligned u16 access. These were overlooked when modifying the code to use u16 pointer for proper alignment. Fixes: 90f90624 ("bnxt_en: Add support for L2 rewrite") Reported-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Blakey 提交于
Since both tc rules and flow table rules are of the same format, we can re-use tc parsing for that, and move the flow table rules to their steering domain - In this case, the next chain after max tc chain. Signed-off-by: NPaul Blakey <paulb@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Michael Guralnik 提交于
Implement devlink reload for mlx5. Usage example: devlink dev reload pci/0000:06:00.0 Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Michael Guralnik 提交于
Use devlink instance name space to set the netdev net namespace. Preparation patch for devlink reload implementation. Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-