All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code.
Signed-off-by: NRashmica Gupta <rashmicy@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Kernel prints respective warnings about various EPOW events for
user information/action after parsing EPOW interrupts. At times
below EPOW reset event warning is seen to be flooding kernel log
over a period of time.

May 25 03:46:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:46:52 alp kernel: Non critical power or cooling issue cleared
May 25 03:53:48 alp kernel: Non critical power or cooling issue cleared
May 25 03:55:46 alp kernel: Non critical power or cooling issue cleared
May 25 03:56:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:59:04 alp kernel: Non critical power or cooling issue cleared
May 25 04:02:01 alp kernel: Non critical power or cooling issue cleared

These EPOW reset events are spurious in nature and are triggered by
firmware without an actual EPOW event being reset. This patch avoids these
multiple EPOW reset warnings by using a counter variable. This variable
is incremented every time an EPOW event is reported. Upon receiving a EPOW
reset event the same variable is checked to filter out spurious events and
decremented accordingly.

This patch also improves log messages to better describe EPOW event being
reported. Merged adjacent log messages into single one to reduce number of
lines printed per event.
Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NVipin K Parashar <vipin@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Test the kernels signal generation code to ensure it can handle an
invalid stack pointer when transactional.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Tested-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Test the kernel's signal return code to ensure that it doesn't crash
when both the transactional and suspend MSR bits are set in the signal
context.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Tested-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move have_htm_nosc() into a new tm.h, and add a new helper, have_htm()
which we'll use in the next patch.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We already do this twice and want to add another so add a helper.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This doesn't really belong in harness.c, it's a helper function. So move
it into utils.c.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Merge the two TM fixes we merged in 4.4. We are about to merge selftests
for these, and without the fixes the selftests will oops.

powerpc fixes for 4.4 #2

 - tm: Block signal return from setting invalid MSR state from Michael Neuling
 - tm: Check for already reclaimed tasks from Michael Neuling

Print MSR TM bits in oops messages.  This appends them to the end
like this:

    MSR: 8000000502823031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[TE]>

You get the TM[] only if at least one TM MSR bit is set.  Inside the
TM[], E means Enabled (bit 32), S means Suspended (bit 33), and T
means Transactional (bit 34)

If no bits are set, you get no TM[] output.

Include rework of printbits() to handle this case.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.

So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics")

This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.

Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

According to memory-barriers.txt:

> Any atomic operation that modifies some state in memory and returns
> information about the state (old or new) implies an SMP-conditional
> general memory barrier (smp_mb()) on each side of the actual
> operation ...

Which mean these operations should be fully ordered. However on PPC,
PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation,
which is currently "lwsync" if SMP=y. The leading "lwsync" can not
guarantee fully ordered atomics, according to Paul Mckenney:

https://lkml.org/lkml/2015/10/14/970

To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee
the fully-ordered semantics.

This also makes futex atomics fully ordered, which can avoid possible
memory ordering problems if userspace code relies on futex system call
for fully ordered semantics.

Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics")
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The slot information of base page size hash pte is stored in the
pgtable_t w.r.t transparent hugepage. We need to make sure we don't
index beyond pgtable_t size.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This will bulk read 4 hash pte slot entries and should reduce the loop
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove the related functions and #defines
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

They don't need to track 4k subpage slot details and hence don't need
second half of pgtable_t.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use the #define instead of open-coding the same
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

pte and pmd table size are dependent on config items. Don't
hard code the same. This make sure we use the right value
when masking pmd entries and also while checking pmd_bad
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For a pte entry we will have _PAGE_PTE set. Our pte page
address have a minimum alignment requirement of HUGEPD_SHIFT_MASK + 1.
We use the lower 7 bits to indicate hugepd. ie.

For pmd and pgd we can find:
1) _PAGE_PTE set pte -> indicate PTE
2) bits [2..6] non zero -> indicate hugepd.
   They also encode the size. We skip bit 1 (_PAGE_PRESENT).
3) othewise pointer to next table.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We support THP only with book3s_64 and 64K page size. Move
THP details to hash64-64k.h to clarify the same.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

W.r.t hugetlb, we support two format for pmd. With book3s_64 and
64K linux page size, we can have pte at the pmd level. Hence we
don't need to support hugepd there. For everything else hugepd
is supported and pmd_huge is (0).
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Only difference here is, we apply the WIMG mapping early, so rflags
passed to updatepp will also be changed.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Instead of open coding it in multiple code paths, export the helper
and add more documentation. Also make sure we don't make assumption
regarding pte bit position
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is similar to 64K insert. May be we want to consolidate
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Convert from asm to C
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

No real change, only style changes
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This free up 11 bits in pte_t. In the later patch we also change
the pte_t format so that we can start supporting migration pte
at pmd level. We now track 4k subpage valid bit as below

If we have _PAGE_COMBO set, we override the _PAGE_F_GIX_SHIFT
and _PAGE_F_SECOND. Together we have 4 bits, each of them
used to indicate whether any of the 4 4k subpage in that group
is valid. ie,

[ group 1 bit ]   [ group 2 bit ]  ..... [ group 4 ]
[ subpage 1 - 4]  [ subpage 5- 8]  ..... [ subpage 13 - 16]

We still track each 4k subpage slot number and secondary hash
information in the second half of pgtable_t. Removing the subpage
tracking have some significant overhead on aim9 and ebizzy benchmark and
to support THP with 4K subpage, we do need a pgtable_t of 4096 bytes.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We should not expect pte bit position in asm code. Simply
by moving part of that to C
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move the booke related headers below booke/32 or booke/64
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

functions which operate on pte bits are moved to hash*.h and other
generic functions are moved to pgtable.h
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This enables us to keep hash64 related bits together, and makes it easy
to follow.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We convert them static inline function here as we did with pte_val in
the previous patch
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We also convert few #define to static inline in this patch for better
type checking
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We copy only needed PTE bits define from pte-common.h to respective
hash related header. This should greatly simply later patches in which
we are going to change the pte format for hash config
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We are going to drop pte_common.h in the later patch. The idea is to
enable hash code not require to define all PTE bits. Having PTE bits
defined in pte_common.h made the code unnecessarily complex.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We also move __ASSEMBLY__ towards the end of header. This avoid
having #ifndef __ASSEMBLY___ all over the header
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This further make a copy of pte defines to book3s/64/hash*.h. This
remove the dependency on pgtable-ppc64-4k.h and pgtable-ppc64-64k.h
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In this patch we do:
cp pgtable-ppc32.h book3s/32/pgtable.h
cp pgtable-ppc64.h book3s/64/pgtable.h

This enable us to do further changes to hash specific config.
We will change the page table format for 64bit hash in later patches.
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>