- 27 6月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
1. We record host (write) buffer depth during reset so we don't need to query HCSR register later on. The host buffer depth doesn't change after the reset 2. Use mei_hbuf_max_data function to compute payload size in bytes Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 5月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
The header exports API for application layer 1. move under include/linux and add to the export list 2. update include path n the sources 3. update TODO Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 5月, 2012 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It's been cleaned up, and there's nothing else left to do, so move it out of staging into drivers/misc/ where all can use it now. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Oren Weil <oren.jer.weil@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 4月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
one instance of bare printk was forgotten in init.c file Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 3月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
Change mei_write_message's return type from bool to int to enable propagation of the error code up to caller functions. The function now returns -EIO when low level write fails and 0 on success. A similar change is done in intermediate caller functions: mei_send_flow_control, mei_connect, and mei_disconnect This makes code more alike to typical Linux kernel error handling. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 3月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
Replace bitfield struct hbm_cmd with simple u8 as we always access the value as whole. This allows us to remove few ugly type casts For possible further uses and documentation purposes we add corresponding bitmask defines Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 2月, 2012 1 次提交
-
-
由 Tomas Winkler 提交于
1. Update Copyright to 2012 2. Also fix mei.h copyright format checkpaatch complained: WARNING: please, no spaces at the start of a line Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 12月, 2011 2 次提交
-
-
由 Tomas Winkler 提交于
1. Remove redundant blanks 2. Straighten code lines that don't go over 80 characters Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
iamthif_mtu doesn't have default value anymore it is always supplied by the ME firmware Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 12月, 2011 1 次提交
-
-
由 Tomas Winkler 提交于
list_for_each_entry_safe(pos, next, &head, list) if (pos) { .... } This check isn't needed. The list cursor in a list_for_each() loop is always a valid pointer Cc: Oren Weil <oren.jer.weil@intel.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 11月, 2011 2 次提交
-
-
由 Tomas Winkler 提交于
1. No need to check if a list is empty before list_for_each_ looping as this is already checked by loop stopping conditional. The side effect is reduced indentation depth from: if (!list_empty) list_for_each() to: list_for_each() 2. drop cb_ prefix from cl_pos, cl_next variables used in list_for_each loops. The code is more compact and readable Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
status was never writen Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 9月, 2011 1 次提交
-
-
由 Oren Weil 提交于
moving the final state, clearing of the client maps and updating of mei state out from mei_host_client_properties function. Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 9月, 2011 2 次提交
-
-
由 Oren Weil 提交于
Adding kernel watchdog interface (/dev/watchdog) to the MEI Driver to support AMT Watchdog feature. This patch and the following one will replace MEI Driver self management of the AMT watchdog with the standard kernel watchdog interface. Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oren Weil 提交于
AMTHI need to be initialized after WD Client was initialized, moving the AMTHI outside of the WD initialization function. in order to remove the coupling between the initialization of those clients. AMTHI is getting initialized (getting connected to the FW feature/client) in two ways: 1) if mei driver fails to send connect message to watchdog client (WD initialization), then immediately the AMTHI client getting initialized right after the watchdog initialization function. 2) if Watchdog client success to send connect message to watchdog client, then only after the driver is getting the connect response message the AMTHI client is getting initialized Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 6月, 2011 5 次提交
-
-
由 Tomas Winkler 提交于
1. remove list used for loop. There were only 2 loops used in non time critical places so we can safely unroll them 2. normalize functions names operating on io_list to mei_io_list_<op> 3. rename mei_fe_same_id to mei_cl_cmp_id used for comparing list elements containing struct mei_cl 4. group together io_list functions in the header file Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
remove write only/unsed variables mei_dev.write_hang and mei_io_lis.tdevice_extension Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
use type bool for boolean variables in struct mei_dev this should save some space providing boolean is 8 bits Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomas Winkler 提交于
All global functions must start with mei_ to reduce the risk of name colisions Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 6月, 2011 1 次提交
-
-
由 Tomas Winkler 提交于
wait_event_interruptible_timeout return value was wrongly used. The remaining timeout was used as the error code. This fix translated wait_event_interruptible_timeout return value into error code that can be propagated. [10291.674121] pci_pm_suspend(): mei_pci_suspend+0x0/0x8b [mei] returns 2500 It's thinkpad t400 with 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07) Reported-by: NArkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 6月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
! has higher precedence than !=. H_RDY is 8 and since neither 0 nor 1 are equal to 8 the original condition was always true. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 5月, 2011 1 次提交
-
-
由 Oren Weil 提交于
Init driver list and queue, MEI Hardware reset flow, init of driver specific host client. MEI Init/reset flow: - Ack all waiting interrupts - Hardware reset flow (Set Reset Bit, Generate Interrupt, Clear Reset Bit Generate Interrupt) - Wait for ME Ready Bit (done in interrupt thread) - Set ME Ready Bit (done in interrupt thread) - Send Start request (done in interrupt thread) - wait for answer - Send Enumerate Clients request (done in interrupt thread) - wait for answer - Send Get Client property for each client request (done in interrupt thread) - Wait for answers - Init Done. MEI Driver connect internally to 2 ME clients/features: AMTHI and AMT watchdog. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NItzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: NOren Weil <oren.jer.weil@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-