Print message on scsi_add_host failure.
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Print the fcoe_libfc_config failure and return proper failure.
Signed-off-by: NSaurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Comment will help in decoding the logging level.
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Port ID will help in debugging.
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Print LBA information for underrun cases.
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Printing scsi command pointer will help in crash dump analysis.
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add debugfs node for driver stats.

[mkp: typo]
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change the message to display load failure.
Signed-off-by: NChad Dupuis <cdupuis@marvell.com>
Signed-off-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Whenever offload ramrod is issued, firmware wants driver to wait for max 5
secs, otherwise driver can initiate further corrective action. Similarly,
when termination ramrod is issued, irrespective of abortive or non-abortive
termination, driver should wait for 60 sec * max TCP-RT timeout.

[mkp: typos]
Signed-off-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.

kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000
kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0
kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0
kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000
kernel: FS:  00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

csiostor driver allocates per port num_online_cpus() irq vectors, so create
per-port irq affinity mask set to spread irq vectors evenly.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ELS IOCB done message should be moved to verbose logging to prevent
confusion about the error case v/s successful submission case.

[mkp: typos]
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes issue reported by some of the customers, who discovered
that after cable pull scenario the devices disappear and path seems to
remain in blocked state. Once the device reappears, driver does not seem to
update path to online. This issue appears because of the defer flag
creating race condition where the same session reappears.  This patch fixes
this issue by indicating SCSI-ML of device lost when
qlt_free_session_done() is called from qlt_unreg_sess().

Fixes: 41dc529a ("qla2xxx: Improve RSCN handling in driver")
Signed-off-by: NQuinn Tran <qtran@marvell.com>
Cc: stable@vger.kernel.org #4.19
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is no old vs new driver anymore.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is a spelling mistake in a kernel message, fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/lpfc/lpfc_init.c:13091:1: warning:
 symbol 'lpfc_sli4_oas_verify' was not declared. Should it be static?
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are a couple of spelling mistakes in some kernel info and notice
messages. Fix these.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are a couple of spelling mistakes in some kernel alert messages.  Fix
these.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NManish Rangankar <mrangankar@marvell.com>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently the qedf_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.

Addresses-Coverity: ("Out-of-bounds access")
Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

commit 84961f28 ("[SCSI] Don't add scsi_device for devices that return
PQ=1, PDT=0x1f") returns SCSI_SCAN_TARGET_PRESENT if inquiry returns PQ=1,
and PDT = 0x1f. However, from the scsi spec, it seemed setting PQ=1, and
PDT to the type it is capable to support, can also mean the device is not
connected. E.g. we see an IBM/2145 returns PQ=1 and PDT=0 for a non-mapped
lun (details attached at the end).

This patch changes the check condition a bit, so the check don't require
PTD to be 0x1f when PQ=1.

$ echo 0 0 1 > /sys/class/scsi_host/host1/scan
[ 2483.722186] scsi 1:0:0:1: scsi scan: INQUIRY pass 1 length 36
[ 2483.725687] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0
[ 2483.729171] scsi 1:0:0:1: scsi scan: INQUIRY pass 2 length 109
[ 2483.732481] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0
[ 2483.735911] scsi 1:0:0:1: Direct-Access     IBM      2145             0000 PQ: 1 ANSI: 6
[ 2483.741282] scsi 1:0:0:1: Attached scsi generic sg2 type 0

$ tail /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM      Model: 2145             Rev: 0000
  Type:   Direct-Access                    ANSI  SCSI revision: 06
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM      Model: 2145             Rev: 0000
  Type:   Direct-Access                    ANSI  SCSI revision: 06
Host: scsi1 Channel: 00 Id: 00 Lun: 01
  Vendor: IBM      Model: 2145             Rev: 0000
  Type:   Direct-Access                    ANSI  SCSI revision: 06

$ lsscsi
[0:0:0:0]    disk    IBM      2145             0000  /dev/sdb
[1:0:0:0]    disk    IBM      2145             0000  /dev/sda
[1:0:0:1]    disk    IBM      2145             0000  -
Signed-off-by: NLi Zhong <lizhongfs@gmail.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/megaraid/megaraid_sas_base.c:4652:1: warning:
 symbol 'megasas_host_device_list_query' was not declared. Should it be static?
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If UFS device responds an unknown request response code, we can not know
what it was via logs because the code is replaced by "DID_ERROR << 16"
before log printing.

Fix this to provide precise request response code information for easier
issue breakdown.
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

To support vlan and bridge devices first find route using ifindex 0, if
route is not found through net device associated with input scsi host then
find route using ifindex of net device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If cxgbi_device_find_by_netdev() returns NULL then find cxgbi device by MAC
address.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi_device's refcount is always grabbed in IO path.

Turns out it isn't necessary, because blk_queue_cleanup() will drain any
in-flight IOs, then cancel timeout/requeue work, and SCSI's requeue_work is
canceled too in __scsi_remove_device().

Also scsi_device won't go away until blk_cleanup_queue() is done.

So don't hold the refcount in IO path, especially the refcount isn't
required in IO path since blk_queue_enter() / blk_queue_exit() is
introduced in the legacy block layer.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Cc: jianchao wang <jianchao.w.wang@oracle.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes regression introduced by commit f8f97b0c ("scsi:
qla2xxx: Cleanups for NVRAM/Flash read/write path") where flash read/write
routine cleanup left out code which resulted into checksum failure leading
to use-after-free stack during driver load.

Following stack trace is seen in the log file

qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.01.00.16-k.
qla2xxx [0000:00:0b.0]-001d: : Found an ISP2532 irq 11 iobase 0x0000000000f47f03.
qla2xxx [0000:00:0b.0]-00cd:8: ISP Firmware failed checksum.
qla2xxx [0000:00:0b.0]-00cf:8: Setup chip ****FAILED****.
qla2xxx [0000:00:0b.0]-00d6:8: Failed to initialize adapter - Adapter flags 2.
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xd0
Read of size 8 at addr ffff8880ca05a490 by task modprobe/857

CPU: 0 PID: 857 Comm: modprobe Not tainted 5.1.0-rc1-dbg+ #4
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
  dump_stack+0x86/0xca
  print_address_description+0x6c/0x234
  ? __list_del_entry_valid+0x15/0xd0
  kasan_report.cold.3+0x1b/0x34
  ? __list_del_entry_valid+0x15/0xd0
  ? __kmem_cache_shutdown.cold.95+0xf5/0x176
  ? __list_del_entry_valid+0x15/0xd0
  __asan_load8+0x54/0x90
  __list_del_entry_valid+0x15/0xd0
  dma_pool_destroy+0x4f/0x260
  ? dma_free_attrs+0xb4/0xd0
  qla2x00_mem_free+0x529/0xcc0 [qla2xxx]
  ? kobject_put+0xdb/0x230
  qla2x00_probe_one+0x2b5e/0x45f0 [qla2xxx]
  ? qla2xxx_pci_error_detected+0x210/0x210 [qla2xxx]
  ? match_held_lock+0x20/0x240
  ? find_held_lock+0xca/0xf0
  ? mark_held_locks+0x86/0xb0
  ? _raw_spin_unlock_irqrestore+0x52/0x60
  ? __pm_runtime_resume+0x5b/0xb0
  ? lockdep_hardirqs_on+0x185/0x260
  ? _raw_spin_unlock_irqrestore+0x52/0x60
  ? trace_hardirqs_on+0x24/0x130
  ? preempt_count_sub+0x13/0xc0
  ? _raw_spin_unlock_irqrestore+0x3d/0x60
  pci_device_probe+0x154/0x1e0
  really_probe+0x17d/0x540
  ? device_driver_attach+0x90/0x90
  driver_probe_device+0x113/0x170
  ? device_driver_attach+0x90/0x90
  device_driver_attach+0x88/0x90
  __driver_attach+0xb5/0x190
  bus_for_each_dev+0xf8/0x160
  ? subsys_dev_iter_exit+0x10/0x10
  ? kasan_check_read+0x11/0x20
  ? preempt_count_sub+0x13/0xc0
  ? _raw_spin_unlock+0x2c/0x50
  driver_attach+0x26/0x30
  bus_add_driver+0x238/0x2f0
  driver_register+0xd7/0x150
  __pci_register_driver+0xd5/0xe0
  ? 0xffffffffa06c8000
  qla2x00_module_init+0x208/0x254 [qla2xxx]
  do_one_initcall+0xc0/0x3c9
  ? trace_event_raw_event_initcall_finish+0x150/0x150
  ? __kasan_kmalloc.constprop.5+0xc7/0xd0
  ? kasan_unpoison_shadow+0x35/0x50
  ? kasan_poison_shadow+0x2f/0x40
  ? __asan_register_globals+0x5a/0x70
  do_init_module+0x103/0x330
  load_module+0x36df/0x3b70
  ? fsnotify+0x611/0x640
  ? module_frob_arch_sections+0x20/0x20
  ? kernel_read+0x74/0xa0
  ? kasan_check_write+0x14/0x20
  ? kernel_read_file+0x25e/0x320
  ? do_mmap+0x42c/0x6c0
  __do_sys_finit_module+0x133/0x1c0
  ? __do_sys_finit_module+0x133/0x1c0
  ? __do_sys_init_module+0x210/0x210
  ? fput_many+0x1b/0xc0
  ? fput+0xe/0x10
  ? do_syscall_64+0x14/0x210
  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
  __x64_sys_finit_module+0x3e/0x50
  do_syscall_64+0x72/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8bd5c03219
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 fc 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9d11de98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055ef21596b50 RCX: 00007f8bd5c03219
RDX: 0000000000000000 RSI: 000055ef21596570 RDI: 0000000000000004
RBP: 000055ef21596570 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000055ef21596c80 R14: 0000000000040000 R15: 000055ef21596b50

Allocated by task 857:
  save_stack+0x43/0xd0
  __kasan_kmalloc.constprop.5+0xc7/0xd0
  kasan_kmalloc+0x9/0x10
  kmem_cache_alloc_trace+0x144/0x300
  dma_pool_create+0xb5/0x3b0
  qla2x00_mem_alloc+0xb98/0x1ad0 [qla2xxx]
  qla2x00_probe_one+0xe28/0x45f0 [qla2xxx]
  pci_device_probe+0x154/0x1e0
  really_probe+0x17d/0x540
  driver_probe_device+0x113/0x170
  device_driver_attach+0x88/0x90
  __driver_attach+0xb5/0x190
  bus_for_each_dev+0xf8/0x160
  driver_attach+0x26/0x30
  bus_add_driver+0x238/0x2f0
  driver_register+0xd7/0x150
  __pci_register_driver+0xd5/0xe0
  qla2x00_module_init+0x208/0x254 [qla2xxx]
  do_one_initcall+0xc0/0x3c9
  do_init_module+0x103/0x330
  load_module+0x36df/0x3b70
  __do_sys_finit_module+0x133/0x1c0
  __x64_sys_finit_module+0x3e/0x50
  do_syscall_64+0x72/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 857:
  save_stack+0x43/0xd0
  __kasan_slab_free+0x139/0x190
  kasan_slab_free+0xe/0x10
  kfree+0xf0/0x2c0
  dma_pool_destroy+0x24c/0x260
  qla2x00_mem_free+0x529/0xcc0 [qla2xxx]
  qla2x00_free_device+0x167/0x1b0 [qla2xxx]
  qla2x00_probe_one+0x2b28/0x45f0 [qla2xxx]
  pci_device_probe+0x154/0x1e0
  really_probe+0x17d/0x540
  driver_probe_device+0x113/0x170
  device_driver_attach+0x88/0x90
  __driver_attach+0xb5/0x190
  bus_for_each_dev+0xf8/0x160
  driver_attach+0x26/0x30
  bus_add_driver+0x238/0x2f0
  driver_register+0xd7/0x150
  __pci_register_driver+0xd5/0xe0
  qla2x00_module_init+0x208/0x254 [qla2xxx]
  do_one_initcall+0xc0/0x3c9
  do_init_module+0x103/0x330
  load_module+0x36df/0x3b70
  __do_sys_finit_module+0x133/0x1c0
  __x64_sys_finit_module+0x3e/0x50
  do_syscall_64+0x72/0x210
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880ca05a400
  which belongs to the cache kmalloc-192 of size 192
The buggy address is located 144 bytes inside of
  192-byte region [ffff8880ca05a400, ffff8880ca05a4c0)
The buggy address belongs to the page:
page:ffffea0003281680 count:1 mapcount:0 mapping:ffff88811bf03380 index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 0000000000000000 0000000c00000001 ffff88811bf03380
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8880ca05a380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffff8880ca05a400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880ca05a480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                          ^
  ffff8880ca05a500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff8880ca05a580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
==================================================================

Fixes: f8f97b0c ("scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path")
Reported-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The qla2x00_set_fcport_state() function is not in the hot path so move its
definition from a .h into a .c file.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Casting a void pointer into another pointer before assigning the pointer to
a variable is not useful. Hence remove such casts.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The 'data_work' and 'data_work_free' member variables are set but never
used. Hence remove both member variables. See also commit 6bcbb317
("qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)").

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The <linux/io-64-nonatomic-lo-hi.h> header file is included because of the
readq() macro. Since that macro is only used in qla_nx.c, move that include
statement into qla_nx.c.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since qla24xx_build_scsi_crc_2_iocbs() is only used inside a single source
file, declare this function static.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reduce the size of the qla2xxx kernel module by moving an array definition
from a .h into a .c file.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Improve source code readability by inserting spaces where these are
required according to the coding standard. This patch only inserts
whitespace and does not make any other changes.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Improve source code readability by following the Linux kernel coding style
for pointer types. This patch only changes whitespace.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch improves readability of the qla2xxx source code.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Most but not all code in the qla2xxx driver uses tabs for indentation.
Make the qla2xxx code easier to read by using tabs consistently for
indentation. This patch improves conformance with the Linux kernel coding
style.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently we print expander PHY indexes in a mix of decimal and hex.

It is more consistent and also more convenient to read decimal, so
make this change.

We use width of 2 for expander and 1 for root PHYs prints.

Some lines which were needlessly spilling multiple lines are unified.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When we discover the PHY is empty in sas_rediscover_dev(), the PHY
information (like negotiated linkrate) is not updated.

As such, for a user examining sysfs for that PHY, they would see
incorrect values:

root@(none)$ cd /sys/class/sas_phy/phy-0:0:20
root@(none)$ more negotiated_linkrate
3.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
3.0 Gbit

So fix this, simply discover the PHY again, even though we know it's empty;
in the above example, this gives us:

root@(none)$ more negotiated_linkrate
Phy disabled

We must do this after unregistering the device associated with the PHY
(in sas_unregister_devs_sas_addr()).
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

According to the SAS spec, an expander device shall transmit BROADCAST
(CHANGE) from at least one phy in each expander port other than the
expander port that is the cause for transmitting BROADCAST (CHANGE).

As such, for when the link is lost for a root PHY attached to an expander
PHY, we get no broadcast event.

This causes an issue for libsas, in that we will not revalidate the domain
for these events.

As a solution, for when a root PHY is formed or deformed from a root port,
insert a broadcast event to trigger a domain revalidation.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>