- 28 3月, 2019 1 次提交
-
-
由 Eric Bernstein 提交于
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 3月, 2019 1 次提交
-
-
由 Nicholas Kazlauskas 提交于
[Why] The current dc_caps doesn't provide the information needed to determine the count and type of each plane to be exposed to userspace. There are three types of DRM planes that are exposed to userspace: 1. Primary planes (can be used for modesetting) 2. Overlay planes (can be blended below or above a primary plane) 3. Cursor planes (blended topmost) We need to know the number and type of each in amdgpu_dm to expose to userspace. Hardware supports blending planes below, above or both ways depending on the ASIC. Alpha support is also ASIC dependent. Some hardware has dedicated pipes for overlays and other hardware combines the pipes. All of this should be exposed in a way that DM can query and use. [How] Introduce the dc_plane_cap structure that describes the capabilities for the hw planes. It describes: - the type of the plane - whether the plane can blend with planes below it - whether the plane can blend with planes above it - whether the plane supports per pixel alpha blending - supported formats on the plane (partial list for now) Pre DCN ASICs don't have their full capabilities described for now. They can be updated as needed in the future. Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 1月, 2019 1 次提交
-
-
由 hersen wu 提交于
[Why] For fastboot, Bios will light up eDP before SW driver is loaded. SW driver will check if eDP is lit by bios through reading the BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP power and phy to save time. Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This causes eDP fast boot to not work property. For some eDP panels, even if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not handle properly. This may cause a short flash on screen. [How] Add definition of BIOS_SCRATCH_3 for all asic Signed-off-by: Nhersen wu <hersenxs.wu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Acked-by: NYongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 1月, 2019 2 次提交
-
-
由 David Francis 提交于
[Why] The aux_engine struct is needlessly complex and is defined multiple times. It contains function pointers that each have only one version and are called only from inside dce_aux. [How] Replace aux_engine with a new struct called dce_aux. Remove all function pointers and call functions directly. Remove unused functions Signed-off-by: NDavid Francis <David.Francis@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jun Lei 提交于
[why] dc_stream_state containing a pointer to sink is poor design. Sink describes the display, and the specifications or capabilities it has. That information is irrelevant for dc_stream_state, which describes hardware state, and is generally used for hardware programming. It could further be argued that dc_sink itself is just a convenience dc provides, and DC should be perfectly capable of programming hardware without any dc_sinks (for example, emulated sinks). [how] Phase 1: Deprecate use of dc_sink pointer in dc_stream. Most references are trivial to remove, but some call sites are risky (such as is_timing_changed) with no obvious logical replacement. These will be removed in follow up change. Add dc_link pointer to dc_stream. This is the typical reason DC really needed sink pointer, and most call sites are replaced with this. DMs also need minor updates, as all 3 DMs leverage stream->sink for some functionality. this is replaced instead by a pointer to private data inside dc_stream_state, which is used by DMs as a quality of life improvment for some key functionality. it allows DMs to set pointers have to their own objects which associate OS objects to dc_stream_states (such as DisplayTarget and amdgpu_dm_connector). Without the private pointer, DMs would be forced to perform a lookup for callbacks. Signed-off-by: NJun Lei <Jun.Lei@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NDavid Francis <David.Francis@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 11月, 2018 5 次提交
-
-
由 Dmytro Laktyushkin 提交于
In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Move things not accessed outside dccg block into dce specific struct Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
This is done to clear up the clock programming sequence since the only time we need to notify pplib is after clock update. This also renames the clk block to dccg, at the moment this block contains both clock management and dccg functionality. Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 10月, 2018 2 次提交
-
-
由 Jun Lei 提交于
[why] ddc engines were recently changed to be independently tracked from pipe count. the change was reflected in resource constructor but not in destructor. this manifests as a memory leak when pipe harvesting is enabled, since not all constructed ddc engines are freed [how] make destructor symmetric with constructor for all dcX_resource Signed-off-by: NJun Lei <Jun.Lei@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Yang 提交于
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: NEric Yang <Eric.Yang2@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 9月, 2018 1 次提交
-
-
由 Dmytro Laktyushkin 提交于
Clock sources currently have support for asic specific function pointers. But actual separation into functions was never performed, leaving us with giant functions that rely on switch. This change creates separate functions, removing switch use. Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 11 9月, 2018 1 次提交
-
-
由 Hersen Wu 提交于
[why] AMD Stoney reference board, there are only 2 pipes (not include underlay), and 3 connectors. resource creation, only 2 I2C/AUX engines are created. Within dc_link_aux_transfer, when pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL. NULL point is referred later causing system crash. [how] each asic design has fixed number of ddc engines at hw side. for each ddc engine, create its i2x/aux engine at sw side. Signed-off-by: NHersen Wu <hersenxs.wu@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 8月, 2018 1 次提交
-
-
由 David Francis 提交于
[Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: NDavid Francis <David.Francis@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 8月, 2018 1 次提交
-
-
由 David Francis 提交于
[Why] In the dce112 function to destroy the resource pool, engines (the aux engines) is destroyed twice. This has no ill effects but is a tad redundant. [How] Remove the redundant call Signed-off-by: NDavid Francis <David.Francis@amd.com> Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 7月, 2018 1 次提交
-
-
由 Bhawanpreet Lakha 提交于
[Why] engine and aux_engine are unnecessary layers we want to remove this layer. [How] flatten engine and aux engine structs into one struct called aux_engine and remove all references to the engine struct. Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 7月, 2018 1 次提交
-
-
由 Bhawanpreet Lakha 提交于
[Why] Aux engine is created from i2caux layer. We want to remove this layer and use the engine directly. [How] Decouple aux engine from i2caux. Move aux engine related code to dce folder and use dc resource pool to manage the engine. And use the engine functions directly Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 14 7月, 2018 1 次提交
-
-
由 Nicholas Kazlauskas 提交于
- Removed dal/dm/dc loggers from linux, switched to kernel prints - Modified functions that used these directly to use macros - dc_logger support is completely dropped from Linux Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 7月, 2018 3 次提交
-
-
由 Rex Zhu 提交于
change wm_min_memg_clk_in_khz -> wm_min_mem_clk_in_khz Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
No functional change. Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 5月, 2018 1 次提交
-
-
由 Harry Wentland 提交于
Things such as mis-indent, and space at beginning of line. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 12 4月, 2018 1 次提交
-
-
由 Julian Parkin 提交于
Block FP16 scaling in validate_resources codepath. Signed-off-by: NJulian Parkin <jparkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 3月, 2018 1 次提交
-
-
由 Harry Wentland 提交于
Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 3月, 2018 2 次提交
-
-
由 Bhawanpreet Lakha 提交于
Created a DC_LOGGER define. This is used to pass the logger into the macros. Anywhere we need to use the logger we need to define DC_LOGGER Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
Created MACROS for all log levels. Also Replaced usage of dm_logger_write to the defined MACROS Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 2月, 2018 2 次提交
-
-
由 Yongqiang Sun 提交于
Use tg count in resource pool for further reference. Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 9月, 2017 7 次提交
-
-
由 Dave Airlie 提交于
This never returned anything else. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
This removes any remaining pointless return codepaths from the DCE code. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
This never returns anything but true. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
This doesn't return anything except true. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
This only ever returned true. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
The checks weren't useful here really. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dave Airlie 提交于
This can't fail as is. Signed-off-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 9月, 2017 1 次提交
-
-
由 Harry Wentland 提交于
Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 9月, 2017 3 次提交
-
-
由 Jerry Zuo 提交于
Rename all the dc validate_context to dc_state and dc current_context to current_state. Signed-off-by: NJerry Zuo <Jerry.Zuo@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Introduce add/remove plane to/from context. Make DC wrapper to use them in WIndows/Diags. Use them in dc_update_surface_to_stream. Call add/remove plane from Linux DM. Remove dc_validation_set from dc_validate_global_state interface and by this remove clean Linux DM from using it. Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Until now new context would start as empty, then populated with exsisting pipes + new. Now we start with duplication of existing context and then add/delete from the context pipes as needed. This allows to do a per stream resource population, start discarding dc_validation_set and by this brings DC closer to to DRM. v2: Add some fixes and rebase. Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <Harry.Wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-