[Blackfin] arch: replace current blackfin specific pfbutton driver with kernel generic gpio key driver
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

early serial init also utilizes the peripheral request api - however
at this point bfin_gpio_init didn't allocate memory for the labels.
So we always have two zombies (allocated pin functions without labels)

This happens before the initcalls - We now allocate memory statically.
Define MAX_RESOURCES individually for each cpu.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

if it does get re-added, it needs to be in the boards directory,
not common code ... or it needs a re-implementation
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NBernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

[Blackfin] arch: set default value of DEB_DMA_URGENT to YES to avoid DMA aborting caused by conflict between core and DMA
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NJavier Herrero <jherrero@hvsistemas.es>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Reprogram DDR EBIU register properly for bf548.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Clean up dump_bfin_mem so that it will display
content from the kernel, as well as l1 instruction, when deferred
HW errors happen, print out the last frame info if it makes sense.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

On BF548-EZKIT, build kernel faills with power management, video and audio enabled.
This patch fix this.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

The memcpy() function returns the src pointer instead of the dst pointer.
This patch fix this bug.
Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

modified CMD_TIMEOUT and DAT_TIMEOUT to CMD_TIME_OUT and DAT_TIME_OUT
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

[Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 board, modification in 8250.c driver for correct compilation with Blackfin
Signed-off-by: NJavier Herrero <jherrero@hvsistemas.es>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651

As Bernd predicted, this was only necessary because of other
problems in the kenel - fixing those, and this is not necessary, so
remove it.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719

When the CPLBs get a miss, we do:
  - find a victim in the HW table
  - remove the victim
  - find the replacement in the software table
  - put it into the HW table.

If we can't find a replacement in the software table, we accidently
leave a duplicate in the HW table. This patch ensures that duplicate
is marked as not valid.

What we should do is find the replacement in the software table, before
we find a victim in the HW table - but its too late in the release cycle
to do that much restructuring of this code.

Rather that duplicate code, connect Hardware Errors (irq5) into trap_c,
so user space processes get killed properly.

The rest of irq_panic() can be moved into traps.c (later)

There is still a small corner case that causes problems when a
pheriperal interrupt goes off a single cycle before a user space
hardware error. This causes a kernel panic, rather than the user
space process being killed.

But, this checkin makes things work in 99.9% of the cases, and is a vast
improvement from what is there today (which fails 100% of the time).
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

revert 19ef9309.

Kevin Winchester reported a lockup during X startup an bisected
it to this commit.
Reported-by: NKevin Winchester <kjwinchester@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] DFS build fixes
  [CIFS] DFS support: provide shrinkable mounts
  [CIFS] Do not log path names in lookup errors
  [CIFS] DFS support patchset: Added mountdata
  [CIFS] Forgot to add two new files from previous commit
  [CIFS] DNS name resolution helper upcall for cifs
  [CIFS] fix checkpatch warnings in fs/cifs/inode.c
  [CIFS] hold ses sem on tcp session reconnect during mount
  [CIFS] Allow setting mode via cifs acl
  [CIFS]  fix unicode string alignment in SPNEGO setup
  [CIFS] cifs_partialpagewrite() cleanup
  [CIFS]  use krb5 session key from first SMB session after a NegProt
  [CIFS] redo existing session setup if needed in cifs_mount
  [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is set
  [CIFS] fix SetEA failure to some Samba versions

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (63 commits)
  ide: remove REQ_TYPE_ATA_CMD
  ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests
  ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
  ide: fix final status check in drive_cmd_intr()
  ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()
  ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)
  ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
  ide: initialize rq->cmd_type in ide_init_drive_cmd() callers
  ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)
  ide: kill DATA_READY define
  ide: task_end_request() fix
  ide: use rq->nr_sectors in task_end_request()
  ide: remove needless ->cursg clearing from task_end_request()
  ide: set IDE_TFLAG_IN_* flags before queuing/executing command
  ide-tape: fix handling of non-special requests in ->end_request method
  ide: fix final status check in task_in_intr()
  ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()
  ide: fix ->io_32bit race in ide_taskfile_ioctl()
  cmd64x: remove /proc/ide/cmd64x
  ide: remove broken disk byte-swapping support
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (56 commits)
  [S390] replace lock_cpu_hotplug with get_online_cpus
  [S390] usage of s390dbf: shrink number of debug areas to use.
  [S390] constify function pointer tables.
  [S390] do local_irq_restore while spinning in spin_lock_irqsave.
  [S390] add smp_call_function_mask
  [S390] dasd: fix loop in request expiration handling
  [S390] Unused field / extern declaration in processor.h
  [S390] Remove TOPDIR from Makefile
  [S390] dasd: add hyper PAV support to DASD device driver, part 1
  [S390] single-step cleanup
  [S390] Move NOTES and BUG_TABLE.
  [S390] drivers/s390/: Spelling fixes
  [S390] include/asm-s390/: Spelling fixes
  [S390] arch/s390/: Spelling fixes
  [S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.
  [S390] vmemmap: allocate struct pages before 1:1 mapping
  [S390] Initialize sclp_ipl_info
  [S390] Allocate and free cpu lowcores and stacks when needed/possible.
  [S390] use LIST_HEAD instead of LIST_HEAD_INIT
  [S390] Load disabled wait psw instead of stopping cpu on halt.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: fix labeling of /proc/net inodes

Based on the earlier work by Tejun Heo.

All users are gone so we can finally remove it.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the earlier work by Tejun Heo.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the earlier work by Tejun Heo.

Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
and make ide_wait_cmd() static.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't check for READY_STAT bit being set for PIO-in protocol (makes the
final status check in drive_cmd_intr() match the one in task_in_intr()).

Also fix function name reported by ide_error() call while at it.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't enable local IRQs for PIO-in protocol in driver_cmd_intr().

While at it:

* Remove redundant rq->cmd_type check.

* Read status register after enabling local IRQs for no-data protocol.

v2:
* Re-add DRQ=1 check lost in v1 (noticed by Sergei).
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the previous work by Tejun Heo.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and
  set_pio_mode() (other callers were aleady over-riding rq->cmd_type).

* Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use wait_drive_not_busy() in drive_cmd_intr().

v2:
* Fix wait_drive_not_busy() comment (noticed by Sergei).
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>