Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined
in NVM Express TP4053. Zoned namespaces are discovered based on their
Command Set Identifier reported in the namespaces Namespace
Identification Descriptor list. A successfully discovered Zoned
Namespace will be registered with the block layer as a host managed
zoned block device with Zone Append command support. A namespace that
does not support append is not supported by the driver.
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NHans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: NDmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: NAjay Joshi <ajay.joshi@wdc.com>
Signed-off-by: NAravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: NMatias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NKeith Busch <keith.busch@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: NMatias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NKeith Busch <keith.busch@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Implements support for multiple I/O Command Sets.  NVMe TP 4056
introduces a method to enumerate multiple command sets per namespace. If
the command set is exposed, this method for enumeration will be used
instead of the traditional method that uses the CC.CSS register command
set register for command set identification.

For namespaces where the Command Set Identifier is not supported or
recognized, the specific namespace will not be created.
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NMatias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Allow emulation of a zoned device with a per zone capacity smaller than
the zone size as as defined in the Zoned Namespace (ZNS) Command Set
specification. The zone capacity defaults to the zone size if not
specified and must be smaller than the zone size otherwise.
Reviewed-by: NMatias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NAravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In the zoned storage model, the sectors within a zone are typically all
writeable. With the introduction of the Zoned Namespace (ZNS) Command
Set in the NVM Express organization, the model was extended to have a
specific writeable capacity.

Extend the zone descriptor data structure with a zone capacity field to
indicate to the user how many sectors in a zone are writeable.

Introduce backward compatibility in the zone report ioctl by extending
the zone report header data structure with a flags field to indicate if
the capacity field is available.
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NMatias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use USEC_PER_SEC instead of magic numbers to make code more readable.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We can make it shorter and simpler without some redundant checks.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If we have a long list of request to send, signal the network stack
that more is coming (MSG_MORE). If we have nothing else, signal MSG_EOR.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Tested-by: NMark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

blk-mq request plugging can improve the execution of our pipeline.
When we queue a request we actually trigger our I/O worker thread
yielding a context switch by definition. However if we know that
there are more requests in the pipe that are coming, we are better
off not trigger our I/O worker and only do that for the last request
in the batch (bd->last). By having it, we improve efficiency by
amortizing context switches over a batch of requests.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Tested-by: NMark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The queue processing will splice to a queue local list, this should
alleviate some contention on the send_list lock, but also prepares
us to the next patch where we look on these lists for network stack
flag optimization.

Remove queue lock as its not used anymore.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Tested-by: NMark Wunderlich <mark.wunderlich@intel.com>
[hch: simplified a loop]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The nvme host and target verify the wwnn and wwpn format via
nvme_fc_parse_traddr(). For instance, it is required that the length of
wwnn to be either 21 ("nn-0x") or 19 (nn-).

Add this verification to nvme-fcloop so that the input should always be in
hex and the length of input should always be 18.

Otherwise, the user may use e.g. 0x2 to create fcloop local port, while
0x0000000000000002 is required for nvme host and target. This makes the
requirement of format confusing.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In function nvmet_subsys_atte_version_show() which uses the NVME_XXX()
macros related to version (of type u64) get rid of the int type cast
when printing subsys version and use appropriate format specifier for
u64.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Replace has_keyed_sgls and metadata_support booleans with a flags member
that will be used for adding more features in the future.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since the nvmet_tcp_ops is static, there is no need to initialize values
to zero.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This field is never used since the introduction of nvme loopback by
commit 3a85a5de ("nvme-loop: add a NVMe loopback host driver").
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Just cleanup by removing the empty line.
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Although use of for loop is preferred it is not a common practice to
have 80 char long for loop initialization and comparison section.

Use temp variables for calculating values and replace them in the
for loop with size of all variables to set to u64 since preferred
variable is declared as u64.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The NVMe PCIe declares module parameter io_queue_depth as int. Change
this to u16 as queue depth can never be negative. Now to reflect this
update module parameter getter function from param_get_int() ->
param_get_uint() and respective setter function with type of n changed
from int to u16 with param_set_int() to param_set_ushort(). Finally
update struct nvme_dev q_depth member to u16 and use u16 in min_t()
when calculating dev->q_depth in the nvme_pci_enable() (since q_depth is
now u16) and use unsigned int instead of int when calculating
dev->tagset.queue_depth as target variable tagset->queue_depth is of type
unsigned int in nvme_dev_add().
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In nvme_init_identify() when calculating submission queue size use u16
instead of int type in the min_t() since target variable ctrl->sqsize is
of type u16.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In nvme_configure_directives() when calculating number of streams use
u16 instead of unsigned type in the min_t() since target variable
ctrl->nr_streams is of type u16.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the
SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno
to what is suggested for this error.

Fixes: c9bfdc7c ("i2c: mlxcpld: Add support for smbus block read transaction")
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NMichael Shych <michaelsh@mellanox.com>
Tested-by: NMichael Shych <michaelsh@mellanox.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

I can't recall why there was none, but we surely want to have it.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

Add more details which have either been missing ever since or describe
recent additions.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

Current AMD's zen-based APUs use this core for some of its i2c-buses.

With this patch we re-enable autodetection of hwmon-alike devices, so
lm-sensors will be able to work automatically.

It does not affect the boot-time of embedded devices, as the class is
set based on the DMI information.

DMI is probed only on Qtechnology QT5222 Industrial Camera Platform.

DocLink: https://qtec.com/camera-technology-camera-platforms/
Fixes: 3eddad96 ("i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"")
Signed-off-by: NRicardo Ribalda <ribalda@kernel.org>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.

Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.

Fixes: eff9ec95 ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

Fix a typo in SENSORS_IR35221 option: module name should be "ir35221"
instead of "ir35521".

Fixes: 8991ebd9 ("hwmon: (pmbus) Add client driver for IR35221")

Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NTao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.comSigned-off-by: NGuenter Roeck <linux@roeck-us.net>

Today xenbus_map_ring_valloc() can return either a negative errno
value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as
e.g -ENOMEM and GNTST_eagain have the same numeric value.

Fix that by turning all grant mapping errors into -ENOENT. This is
no problem as all callers of xenbus_map_ring_valloc() only use the
return value to print an error message, and in case of mapping errors
the grant status value has already been printed by __xenbus_map_ring()
before.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.comSigned-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

xenbus_map_ring_valloc() and its sub-functions are putting quite large
structs and arrays on the stack. This is problematic at runtime, but
might also result in build failures (e.g. with clang due to the option
-Werror,-Wframe-larger-than=... used).

Fix that by moving most of the data from the stack into a dynamically
allocated struct. Performance is no issue here, as
xenbus_map_ring_valloc() is used only when adding a new PV device to
a backend driver.

While at it move some duplicated code from pv/hvm specific mapping
functions to the single caller.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.comSigned-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Acer C720 running Linux v5.3 reports this in klog:

tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102

% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c:	{"IFX0102", 0},
drivers/char/tpm/tpm_tis.c:	{"IFX0102", 0},		/* Infineon */

Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.

Fixes: 93e1b7d4 ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: NFerry Toth: <ferry.toth@elsinga.info>
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening.  Right around this big
delay there were messages about the TPM:

[    2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[    3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...

I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().

Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.

NOTES:
* It's possible that other hardware runs through the init sequence
  faster than Cr50 and this isn't such a big problem for them.
  However, even if they are faster they are still doing _some_
  transfers over a SPI bus so this should benefit everyone even if to
  a lesser extent.
* It's possible that there are extra delays in the code that could be
  optimized out.  I didn't dig since once I enabled async probe they
  no longer impacted me.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer.  But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.

This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough.  I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.

To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.

Fixes: 18b3670d ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Trivial fix, the spelling of "drescription" is incorrect
in function comment.

Fix this.
Signed-off-by: NBinbin Zhou <zhoubinbin@uniontech.com>
Acked-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
 variable dereferenced before check 'chip->ops' (see line 979)

'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.

SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.

The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'.  This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.

Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.

Let's clean this up and just make the tx_buf NULL before we call
flow_control().  Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.

NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command.  This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d1248 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: NMario Limonciello <Mario.Limonciello@dell.com>
Tested-by: NAlex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.

Fixes: b2ce4d90 ("nvme-multipath: set bdi capabilities once")
Reported-by: NAvinash M N <Avinash.M.N@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>

Commit 59c7c3ca intended to only silently ignore non retry-able
errors (DNR bit set) such that we can still identify misbehaving
controllers, and in the other hand propagate retry-able errors (DNR bit
cleared) so we don't wrongly abandon a namespace just because it happens
to be temporarily inaccessible.

The goal remains the same as the original commit where this was
introduced but unfortunately had the logic backwards.

Fixes: 59c7c3ca ("nvme: fix possible hang when ns scanning fails during error recovery")
Reported-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since merging the commit identified in Fixes below, we trigger this
compile time warning:

drivers/md/dm.c: In function ‘__map_bio’:
drivers/md/dm.c:1296:24: warning: unused variable ‘md’ [-Wunused-variable]
 1296 |  struct mapped_device *md = io->md;
       |                        ^~

Remove the 'md' variable.

Fixes: 5a6c35f9 ("block: remove direct_make_request")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Large clock values may overflow and show up as negative.

Reported by prOMiNd on IRC.
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org