Back when I added -Werror in commit ba55bd74 ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.

At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.

So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is a nice cleanup, arch/powerpc/Makefile is long and messy so
moving this out helps a little.

It also allows us to do:

  $ make arch/powerpc

Which can be helpful if you just want to compile test some changes to
arch code and not link everything.

Finally it also gives us a single place to do subdir-cc-flags
assignments which affect the whole of arch/powerpc, which we will do
in a future patch.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.

Use print_hex_dump() instead
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

do_exit() already includes a test to panic() is in_interrupt()

This patch removes powerpc one which is redundant.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When creating the boot-time FDT from an actual Open Firmware live
tree, let's generate "phandle" properties for the phandles instead
of the old deprecated "linux,phandle".
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Unsplit warning printf()]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

prom_init.c must not modify the kernel image outside
of the .bss.prominit section. Thus make sure that
prom_init.o doesn't have anything in any of these:

	.data
	.bss
	.init.data
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This makes __prombss its own section, and for now store
it in .bss.

This will give us the ability later to store it elsewhere
and/or free it after boot (it's about 8KB).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

As they are no longer used past the end of prom_init
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Make the existing initialized definition constant and copy
it to a __prombss copy
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Initialize it dynamically instead of statically
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We removed support for running under any OPAL version
earlier than v3 in 2015 (they never saw the light of day
anyway), but we kept some leftovers of this support in
prom_init.c, so let's take it out.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This replaces all occurrences of __initdata for uninitialized
data with a new __prombss

Currently __promdata is defined to be __initdata but we'll
eventually change that.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:

 a) The guest is required to use the H_SCM_BIND_MEM h-call to add
    add the SCM region to it's physical address space, and
 b) There is currently no mechanism for relating a bare of_pmem region
    to the backing DIMM (or not-a-DIMM for our case).

Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch implements support for discovering storage class memory
devices at boot and for handling hotplug of new regions via RTAS
hotplug events.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
[mpe: Fix CONFIG_MEMORY_HOTPLUG=n build]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:

[   33.663993] Machine check in kernel mode.
[   33.664011] Caused by (from SRR1=9032):
[   33.664036] Data access error at address c90c8000

This patch fixes it by using pr_cont() for the second part:

[  133.258131] Machine check in kernel mode.
[  133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Book3e defines both _PAGE_USER and _PAGE_PRIVILEGED, so the nohash
default pte_mkprivileged() and pte_mkuser() are not usable.

This patch redefines them for book3e.

In theorie, only pte_mkprivileged() needs to be redefined because
_PAGE_USER includes _PAGE_PRIVILEGED, but it is less confusing
to redefine both.

Fixes: a0da4bc1 ("powerpc/mm: Allow platforms to redefine some helpers")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Other archs do the same and instead of adding required pte bits (which
got masked out) in __ioremap_at(), make sure we filter only pfn bits
out.

Fixes: 26973fa5 ("powerpc/mm: use pte helpers in generic code")
Reviewed-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently we limit the max addressable memory to 128TB. This patch increase the
limit to 2PB. We can have devices like nvdimm which adds memory above 512TB
limit.

We still don't support regular system ram above 512TB. One of the challenge with
that is the percpu allocator, that allocates per node memory and use the max
distance between them as the percpu offsets. This means with large gap in
address space ( system ram above 1PB) we will run out of vmalloc space to map
the percpu allocation.

In order to support addressable memory above 512TB, kernel should be able to
linear map this range. To do that with hash translation we now add 4 context
to kernel linear map region. Our per context addressable range is 512TB. We
still keep VMALLOC and VMEMMAP region to old size. SLB miss handlers is updated
to validate these limit.

We also limit this update to SPARSEMEM_VMEMMAP and SPARSEMEM_EXTREME
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We will be adding get_kernel_context later. Update function name to indicate
this handle context allocation user space address.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds CONFIG_DEBUG_VM checks to ensure:
  - The kernel stack is in the SLB after it's flushed and bolted.
  - We don't insert an SLB for an address that is aleady in the SLB.
  - The kernel SLB miss handler does not take an SLB miss.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

slb_flush_and_rebolt() is misleading, it is called in virtual mode, so
it can not possibly change the stack, so it should not be touching the
shadow area. And since vmalloc is no longer bolted, it should not
change any bolted mappings at all.

Change the name to slb_flush_and_restore_bolted(), and have it just
load the kernel stack from what's currently in the shadow SLB area.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When switching processes, currently all user SLBEs are cleared, and a
few (exec_base, pc, and stack) are preloaded. In trivial testing with
small apps, this tends to miss the heap and low 256MB segments, and it
will also miss commonly accessed segments on large memory workloads.

Add a simple round-robin preload cache that just inserts the last SLB
miss into the head of the cache and preloads those at context switch
time. Every 256 context switches, the oldest entry is removed from the
cache to shrink the cache and require fewer slbmte if they are unused.

Much more could go into this, including into the SLB entry reclaim
side to track some LRU information etc, which would require a study of
large memory workloads. But this is a simple thing we can do now that
is an obvious win for common workloads.

With the full series, process switching speed on the context_switch
benchmark on POWER9/hash (with kernel speculation security masures
disabled) increases from 140K/s to 178K/s (27%).

POWER8 does not change much (within 1%), it's unclear why it does not
see a big gain like POWER9.

Booting to busybox init with 256MB segments has SLB misses go down
from 945 to 69, and with 1T segments 900 to 21. These could almost all
be eliminated by preloading a bit more carefully with ELF binary
loading.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This will be used by the SLB code in the next patch, but for now this
sets the slb_addr_limit to the correct size for 32-bit tasks.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add 32-entry bitmaps to track the allocation status of the first 32
SLB entries, and whether they are user or kernel entries. These are
used to allocate free SLB entries first, before resorting to the round
robin allocator.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.

This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.

Arbitrary kernel memory must not be accessed when handling kernel
space SLB misses, so care should be taken there. However user SLB
misses can access any kernel memory, which can be used to move some
fields out of the paca (in later patches).

User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.

[ Credit to Aneesh for bug fixes, error checks, and improvements to
  bad address handling, etc ]
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Disallow tracing for all of slb.c for now.]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PPR is the odd register out when it comes to interrupt handling, it is
saved in current->thread.ppr while all others are saved on the stack.

The difficulty with this is that accessing thread.ppr can cause a SLB
fault, but the SLB fault handler implementation in C change had
assumed the normal exception entry handlers would not cause an SLB
fault.

Fix this by allocating room in the interrupt stack to save PPR.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we've split the user & kernel versions of pt_regs we need to
be more careful in the ptrace code.

For now we've ensured the location of the fields in both structs is
the same, so most of the ptrace code doesn't need updating.

But there are a few places where we use sizeof(pt_regs), and these
will be wrong as soon as we increase the size of the kernel structure.

So flip them all to use sizeof(user_pt_regs).
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We use a shared definition for struct pt_regs in uapi/asm/ptrace.h.
That means the layout of the structure is ABI, ie. we can't change it.

That would be fine if it was only used to describe the user-visible
register state of a process, but it's also the struct we use in the
kernel to describe the registers saved in an interrupt frame.

We'd like more flexibility in the content (and possibly layout) of the
kernel version of the struct, but currently that's not possible.

So split the definition into a user-visible definition which remains
unchanged, and a kernel internal one.

At the moment they're still identical, and we check that at build
time. That's because we have code (in ptrace etc.) that assumes that
they are the same. We will fix that code in future patches, and then
we can break the strict symmetry between the two structs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It's never modified.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It is never modified
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It's not used anywhere else.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In the same spirit as already done in pte query helpers,
this patch changes pte setting helpers to perform endian
conversions on the constants rather than on the pte value.

In the meantime, it changes pte_access_permitted() to use
pte helpers for the same reason.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

_PAGE_PRIVILEGED corresponds to the SH bit which doesn't protect
against user access but only disables ASID verification on kernel
accesses. User access is controlled with _PMD_USER flag.

Name it _PAGE_SH instead of _PAGE_PRIVILEGED

_PAGE_HUGE corresponds to the SPS bit which doesn't really tells
that's it is a huge page but only that it is not a 4k page.

Name it _PAGE_SPS instead of _PAGE_HUGE
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Do not include pte-common.h in nohash/32/pgtable.h

As that was the last includer, get rid of pte-common.h
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Cache related flags like _PAGE_COHERENT and _PAGE_WRITETHRU
are defined on most platforms. The platforms not defining
them don't define any alternative. So we can give them a NUL
value directly for those platforms directly.
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The 40xx defines _PAGE_HWWRITE while others don't.
The 8xx defines _PAGE_RO instead of _PAGE_RW.
The 8xx defines _PAGE_PRIVILEGED instead of _PAGE_USER.
The 8xx defines _PAGE_HUGE and _PAGE_NA while others don't.

Lets those platforms redefine pte_write(), pte_wrprotect() and
pte_mkwrite() and get _PAGE_RO and _PAGE_HWWRITE off the common
helpers.

Lets the 8xx redefine pte_user(), pte_mkprivileged() and pte_mkuser()
and get rid of _PAGE_PRIVILEGED and _PAGE_USER default values.

Lets the 8xx redefine pte_mkhuge() and get rid of
_PAGE_HUGE default value.
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

nohash/64 only uses book3e PTE flags, so it doesn't need pte-common.h

This also allows to drop PAGE_SAO and H_PAGE_4K_PFN from pte_common.h
as they are only used by PPC64
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The base kernel PAGE_XXXX definition sets are more or less platform
specific. Lets distribute them close to platform _PAGE_XXX flags
definition, and customise them to their exact platform flags.

Also defines _PAGE_PSIZE and _PTE_NONE_MASK for each platform
allthough they are defined as 0.

Do the same with _PMD flags like _PMD_USER and _PMD_PRESENT_MASK
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now the pte-common.h is only for nohash platforms, lets
move pte_user() helper out of pte-common.h to put it
together with other helpers.
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>