- 19 6月, 2013 14 次提交
-
-
由 Dave Kleikamp 提交于
This fixes a race where a cpu may re-load a tlb from a stale tsb right after it has been flushed by a remote function call. I still see some instability when stressing the system with parallel kernel builds while creating memory pressure by writing to /proc/sys/vm/nr_hugepages, but this patch improves the stability significantly. Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com> Acked-by: NBob Picco <bob.picco@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tushar Behera 提交于
Commit 75096579 ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). While at it, also remove the error message as devm_ioremap_resource() also prints similar error message. Signed-off-by: NTushar Behera <tushar.behera@linaro.org> CC: sparclinux@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 bob picco 提交于
The Machine Description (MD) property "address-congruence-offset" is optional. According to the MD specification the value is assumed 0UL when not present. This caused early boot failure on T5. Signed-off-by: NBob Picco <bob.picco@oracle.com> CC: sparclinux@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Larsson 提交于
This enables interrupts for Leon before having the CPU enter power-down mode. Commit 87fa05ae, "sparc: Use generic idle loop", gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and powering down the processor will get the processor stuck waiting for an interrupt that will never be reacted to. Signed-off-by: NAndreas Larsson <andreas@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Larsson 提交于
This reduces the need from two timers to one timer. Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via tick_periodic it reads the value of the usual timer it can get an wrapped timer value without timer_cs_internal_counter having been updated leading to the clock going backwards. This effectively hangs one cpu that gets stuck in update_wall_time with an offset slightly smaller than 0xffffffffffffffff. Signed-off-by: NAndreas Larsson <andreas@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhao Hongjiang 提交于
'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and 'boot_command' maybe larger than them. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Gang 提交于
When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while', but outside loop 'for' still has effect, so "*cp++ = ' '" will continue repeating which may cause memory overflow. So need additional length check for it in the outside looping. Also beautify the related code which found by "./scripts/checkpatch.pl" Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Efremov 提交于
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 build fix from Tony Luck: "Fix ia64 build breakage by adding newly needed #include" We're still debating the patch that caused the build breakage, but this fix seems like a good idea regardless of how that ends up being handled. * tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Fix include dependency in asm/irqflags.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull SLAB fix from Pekka Enberg: "A slab regression fix by Sasha Levin" * 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slab: prevent warnings when allocating with __GFP_NOWARN
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Only driver/device-specific small fixes that are pretty safe to apply: - USB-audio Android and Logitech webcam fixes - HD-audio MacBook Air 4,2 quirk - Complete Dell headset quirk entries that were introduced in 3.10" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add models for Dell headset jacks ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310 ALSA: hda - Fix pin configurations for MacBook Air 4,2 ALSA: usb-audio: work around Android accessory firmware bug ALSA: hda - Headset mic support for three more machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "Series of fixes for 3.10. There are some usual driver fixes (mostly on s5p/exynos playform drivers), plus some fixes at V4L2 core" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits) [media] soc_camera: error dev remove and v4l2 call [media] sh_veu: fix the buffer size calculation [media] sh_veu: keep power supply until the m2m context is released [media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted [media] v4l2-ioctl: don't print the clips list [media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls [media] cx88: fix NULL pointer dereference [media] DocBook/media/v4l: update version number [media] exynos4-is: Remove "sysreg" clock handling [media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev [media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured [media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded [media] s5p-mfc: Add NULL check for allocated buffer [media] s5p-mfc: added missing end-of-lines in debug messages [media] s5p-mfc: v4l2 controls setup routine moved to initialization code [media] s5p-mfc: separate encoder parameters for h264 and mpeg4 [media] s5p-mfc: Remove special clock usage in driver [media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function [media] v4l2: mem2mem: save irq flags correctly [media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support ...
-
git://git.linaro.org/people/mturquette/linux由 Linus Torvalds 提交于
Pull clock framework fixes from Mike Turquette: "Half of the fixes here are for Exynos5, fixing regressions in CPUfreq due to the common clock framework conversion as well as one fix which allows the platform to properly reboot again. One core framework fix patches up a memory leak, another fixes a build error for the SPEAr platform and finally a Tegra-specific fix allows PCIe to initialize properly on that platform again" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: ARM: tegra30: clocks: Fix pciex clock registration clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock clk: spear: fix build error for spear3xx clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock clk: exynos5250: Update cpufreq related clocks for EXYNOS5250 clk: remove notifier from list before freeing it
-
- 18 6月, 2013 1 次提交
-
-
由 David Daney 提交于
asm/kregs.h isn't always included first, so we need an explicit include. [Fix build breakage introduced by f21afc25 smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().] Signed-off-by: NDavid Daney <david.daney@cavium.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 17 6月, 2013 7 次提交
-
-
由 David Henningsson 提交于
These headset jacks keep coming in on more and more platforms, and it's possible I don't catch them all. Make it easier to test and verify by making models. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
MacBook Air 4,2 requires the whole default pin configuration table to be overridden by the driver, as usual, as Apple's machines don't set up properly after boot. Otherwise mic won't work, and other ill effect may happen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381Reported-and-tested-by: NPeter John Hartman <peterjohnhartman@gmail.com> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
When the Android firmware enables the audio interfaces in accessory mode, it always declares in the control interface's baInterfaceNr array that interfaces 0 and 1 belong to the audio function. However, the accessory interface itself, if also enabled, already is at index 0 and shifts the actual audio interface numbers to 1 and 2, which prevents the PCM streaming interface from being seen by the host driver. To get the PCM interface interface to work, detect when the descriptors point to the (for this driver useless) accessory interface, and redirect to the correct one. Reported-by: NJeremy Rosen <jeremy.rosen@openwide.fr> Tested-by: NJeremy Rosen <jeremy.rosen@openwide.fr> Cc: <stable@vger.kernel.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
They need these quirks to have headset mic support. BugLink: https://bugs.launchpad.net/bugs/1189363Tested-by: NShawn Wang <shawn.wang@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jay Agarwal 提交于
Registering pciex as peripheral clock instead of fixed clock as tegra_perih_reset_assert(deassert) api of this clock api gives warning and ultimately does not succeed to assert(deassert) Signed-off-by: NJay Agarwal <jagarwal@nvidia.com> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Al Viro 提交于
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2013 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "These are a little later than I planned on since I got caught up with handling merges for 3.11 most of the week. Another week, another batch of fixes for arm-soc platforms. Again, nothing controversial. A few more than would be ideal, but all are valid fixes. In particular the prima2 panic patch is critical since it fixes a problem where multiplatform kernels panic on all but prima2 hardware." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms ARM: prima2: fix incorrect panic usage arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant(). ARM: omap3: clock: fix wrong container_of in clock36xx.c ARM: dts: OMAP5: Fix missing PWM capability to timer nodes ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line ARM: dts: AM33xx: Fix properties on gpmc node arm: omap2: fix AM33xx hwmod infos for UART2 ARM: OMAP3: Fix iva2_pwrdm settings for 3703
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix RTNL locking in batman-adv, from Matthias Schiffer. 2) Don't allow non-passthrough macvlan devices to set NOPROMISC via netlink, otherwise we can end up with corrupted promisc counter values on the device. From Michael S Tsirkin. 3) Fix stmmac driver build with debugging defines enabled, from Dinh Nguyen. 4) Make sure name string we give in socket address in AF_PACKET is NULL terminated, from Daniel Borkmann. 5) Fix leaking of two uninitialized bytes of memory to userspace in l2tp, from Guillaume Nault. 6) Clear IPCB(skb) before tunneling otherwise we touch dangling IP options state and crash. From Saurabh Mohan. 7) Fix suspend/resume for davinci_mdio by using suspend_late and resume_early. From Mugunthan V N. 8) Don't tag ip_tunnel_init_net and ip_tunnel_delete_net with __net_{init,exit}, they can be called outside of those contexts. From Eric Dumazet. 9) Fix RX length error in sh_eth driver, from Yoshihiro Shimoda. 10) Fix missing sctp_outq initialization in some code paths of SCTP stack, from Neil Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. tulip: Properly check dma mapping result net: sh_eth: fix incorrect RX length error if R8A7740 ip_tunnel: remove __net_init/exit from exported functions drivers: net: davinci_mdio: restore mdio clk divider in mdio resume drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driver net/ipv4: ip_vti clear skb cb before tunneling. tg3: Wait for boot code to finish after power on l2tp: Fix sendmsg() return value l2tp: Fix PPP header erasure and memory leak bonding: fix igmp_retrans type and two related races bonding: reset master mac on first enslave failure packet: packet_getname_spkt: make sure string is always 0-terminated net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG used be2net: Fix 32-bit DMA Mask handling xen-netback: don't de-reference vif pointer after having called xenvif_put() macvlan: don't touch promisc without passthrough batman-adv: Don't handle address updates when bla is disabled batman-adv: forward late OGMs from best next hop ...
-
- 15 6月, 2013 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "So here are 3 fixes still for 3.10. Fixes are simple, bugs are nasty (though not recent regressions, nasty enough) and all targeted at stable" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix missing/delayed calls to irq_work powerpc: Fix emulation of illegal instructions on PowerNV platform powerpc: Fix stack overflow crash in resume_kernel when ftracing
-
由 David Daney 提交于
Thanks to commit f91eb62f ("init: scream bloody murder if interrupts are enabled too early"), "bloody murder" is now being screamed. With a MIPS OCTEON config, we use on_each_cpu() in our irq_chip.irq_bus_sync_unlock() function. This gets called in early as a result of the time_init() call. Because the !SMP version of on_each_cpu() unconditionally enables irqs, we get: WARNING: at init/main.c:560 start_kernel+0x250/0x410() Interrupts were enabled early CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc5-Cavium-Octeon+ #801 Call Trace: show_stack+0x68/0x80 warn_slowpath_common+0x78/0xb0 warn_slowpath_fmt+0x38/0x48 start_kernel+0x250/0x410 Suggested fix: Do what we already do in the SMP version of on_each_cpu(), and use local_irq_save/local_irq_restore. Because we need a flags variable, make it a static inline to avoid name space issues. [ Change from v1: Convert on_each_cpu to a static inline function, add #include <linux/irqflags.h> to avoid build breakage on some files. on_each_cpu_mask() and on_each_cpu_cond() suffer the same problem as on_each_cpu(), but they are not causing !SMP bugs for me, so I will defer changing them to a less urgent patch. ] Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull VFS fixes from Al Viro: "Several fixes + obvious cleanup (you've missed a couple of open-coded can_lookup() back then)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: snd_pcm_link(): fix a leak... use can_lookup() instead of direct checks of ->i_op->lookup move exit_task_namespaces() outside of exit_notify() fput: task_work_add() can fail if the caller has passed exit_task_work() ncpfs: fix rmdir returns Device or resource busy
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs fixes from Ben Myers: - Remove noisy warnings about experimental support which spams the logs - Add padding to align directory and attr structures correctly - Set block number on child buffer on a root btree split - Disable verifiers during log recovery for non-CRC filesystems * tag 'for-linus-v3.10-rc6' of git://oss.sgi.com/xfs/xfs: xfs: don't shutdown log recovery on validation errors xfs: ensure btree root split sets blkno correctly xfs: fix implicit padding in directory and attr CRC formats xfs: don't emit v5 superblock warnings on write
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char / misc fixes from Greg Kroah-Hartman: "Here are some small mei driver fixes for 3.10-rc6 that fix some reported problems" * tag 'char-misc-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB driver fixes that resolve some reported problems for 3.10-rc6 Nothing major, just 3 USB serial driver fixes, and two chipidea fixes" * tag 'usb-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: fix id change handling usb: chipidea: fix no transceiver case USB: pl2303: fix device initialisation at open USB: spcp8x5: fix device initialisation at open USB: f81232: fix device initialisation at open
-
由 Benjamin Herrenschmidt 提交于
When replaying interrupts (as a result of the interrupt occurring while soft-disabled), in the case of the decrementer, we are exclusively testing for a pending timer target. However we also use decrementer interrupts to trigger the new "irq_work", which in this case would be missed. This change the logic to force a replay in both cases of a timer boundary reached and a decrementer interrupt having actually occurred while disabled. The former test is still useful to catch cases where a CPU having been hard-disabled for a long time completely misses the interrupt due to a decrementer rollover. CC: <stable@vger.kernel.org> [v3.4+] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Paul Mackerras 提交于
Normally, the kernel emulates a few instructions that are unimplemented on some processors (e.g. the old dcba instruction), or privileged (e.g. mfpvr). The emulation of unimplemented instructions is currently not working on the PowerNV platform. The reason is that on these machines, unimplemented and illegal instructions cause a hypervisor emulation assist interrupt, rather than a program interrupt as on older CPUs. Our vector for the emulation assist interrupt just calls program_check_exception() directly, without setting the bit in SRR1 that indicates an illegal instruction interrupt. This fixes it by making the emulation assist interrupt set that bit before calling program_check_interrupt(). With this, old programs that use no-longer implemented instructions such as dcba now work again. CC: <stable@vger.kernel.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
It's possible for us to crash when running with ftrace enabled, eg: Bad kernel stack pointer bffffd12 at c00000000000a454 cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40] pc: c00000000000a454: resume_kernel+0x34/0x60 lr: c00000000000335c: performance_monitor_common+0x15c/0x180 sp: bffffd12 msr: 8000000000001032 dar: bffffd12 dsisr: 42000000 If we look at current's stack (paca->__current->stack) we see it is equal to c0000002ecab0000. Our stack is 16K, and comparing to paca->kstack (c0000002ecab3e30) we can see that we have overflowed our kernel stack. This leads to us writing over our struct thread_info, and in this case we have corrupted thread_info->flags and set _TIF_EMULATE_STACK_STORE. Dumping the stack we see: 3:mon> t c0000002ecab0000 [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70 [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180 --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30 [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable) [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90 [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34 [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300 [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable) [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280 [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40 [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 ... and so on __ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry path. At that point the irq state is not consistent, ie. interrupts are hard disabled (by the exception entry), but the paca soft-enabled flag may be out of sync. This leads to the local_irq_restore() in trace_graph_entry() actually enabling interrupts, which we do not want. Because we have not yet reprogrammed the decrementer we immediately take another decrementer exception, and recurse. The fix is twofold. Firstly make sure we call DISABLE_INTS before calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles the irq state in the paca with the hardware, making it safe again to call local_irq_save/restore(). Although that should be sufficient to fix the bug, we also mark the runlatch routines as notrace. They are called very early in the exception entry and we are asking for trouble tracing them. They are also fairly uninteresting and tracing them just adds unnecessary overhead. [ This regression was introduced by fe1952fc "powerpc: Rework runlatch code" by myself --BenH ] CC: <stable@vger.kernel.org> [v3.4+] Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Al Viro 提交于
in case when snd_pcm_stream_linked(substream) is true, we end up leaking group. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a couple of places got missed back when Linus has introduced that one... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Oleg Nesterov 提交于
exit_notify() does exit_task_namespaces() after forget_original_parent(). This was needed to ensure that ->nsproxy can't be cleared prematurely, an exiting child we are going to reparent can do do_notify_parent() and use the parent's (ours) pid_ns. However, after 32084504 "pidns: use task_active_pid_ns in do_notify_parent" ->nsproxy != NULL is no longer needed, we rely on task_active_pid_ns(). Move exit_task_namespaces() from exit_notify() to do_exit(), after exit_fs() and before exit_task_work(). This solves the problem reported by Andrey, free_ipc_ns()->shm_destroy() does fput() which needs task_work_add(). Note: this particular problem can be fixed if we change fput(), and that change makes sense anyway. But there is another reason to move the callsite. The original reason for exit_task_namespaces() from the middle of exit_notify() was subtle and it has already gone away, now this looks confusing. And this allows us do simplify exit_notify(), we can avoid unlock/lock(tasklist) and we can use ->exit_state instead of PF_EXITING in forget_original_parent(). Reported-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Oleg Nesterov 提交于
fput() assumes that it can't be called after exit_task_work() but this is not true, for example free_ipc_ns()->shm_destroy() can do this. In this case fput() silently leaks the file. Change it to fallback to delayed_fput_work if task_work_add() fails. The patch looks complicated but it is not, it changes the code from if (PF_KTHREAD) { schedule_work(...); return; } task_work_add(...) to if (!PF_KTHREAD) { if (!task_work_add(...)) return; /* fallback */ } schedule_work(...); As for shm_destroy() in particular, we could make another fix but I think this change makes sense anyway. There could be another similar user, it is not safe to assume that task_work_add() can't fail. Reported-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
Unfortunately, we cannot guarantee that items logged multiple times and replayed by log recovery do not take objects back in time. When they are taken back in time, the go into an intermediate state which is corrupt, and hence verification that occurs on this intermediate state causes log recovery to abort with a corruption shutdown. Instead of causing a shutdown and unmountable filesystem, don't verify post-recovery items before they are written to disk. This is less than optimal, but there is no way to detect this issue for non-CRC filesystems If log recovery successfully completes, this will be undone and the object will be consistent by subsequent transactions that are replayed, so in most cases we don't need to take drastic action. For CRC enabled filesystems, leave the verifiers in place - we need to call them to recalculate the CRCs on the objects anyway. This recovery problem can be solved for such filesystems - we have a LSN stamped in all metadata at writeback time that we can to determine whether the item should be replayed or not. This is a separate piece of work, so is not addressed by this patch. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit 9222a9cf)
-
由 Dave Chinner 提交于
For CRC enabled filesystems, the BMBT is rooted in an inode, so it passes through a different code path on root splits than the freespace and inode btrees. This is much less traversed by xfstests than the other trees. When testing on a 1k block size filesystem, I've been seeing ASSERT failures in generic/234 like: XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317 which are generally preceded by a lblock check failure. I noticed this in the bmbt stats: $ pminfo -f xfs.btree.block_map xfs.btree.block_map.lookup value 39135 xfs.btree.block_map.compare value 268432 xfs.btree.block_map.insrec value 15786 xfs.btree.block_map.delrec value 13884 xfs.btree.block_map.newroot value 2 xfs.btree.block_map.killroot value 0 ..... Very little coverage of root splits and merges. Indeed, on a 4k filesystem, block_map.newroot and block_map.killroot are both zero. i.e. the code is not exercised at all, and it's the only generic btree infrastructure operation that is not exercised by a default run of xfstests. Turns out that on a 1k filesystem, generic/234 accounts for one of those two root splits, and that is somewhat of a smoking gun. In fact, it's the same problem we saw in the directory/attr code where headers are memcpy()d from one block to another without updating the self describing metadata. Simple fix - when copying the header out of the root block, make sure the block number is updated correctly. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com> (cherry picked from commit ade1335a)
-