- 20 9月, 2011 5 次提交
-
-
由 Alexander Duyck 提交于
This change is meant to improve performance by splitting the Tx and Rx rings into 3 sections. The first is primarily a read only section containing basic things like the indexes, a pointer to the dev and netdev structures, and basic information. The second section contains the stats and next_to_use and next_to_clean values. The third section is primarily unused values that can just be placed at the end of the ring and are not used in the hot path. The adapter structure has several sections that are read in the hot path. In order to improve performance there I am combining the frequent read hot path items into a single cache line. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is meant to streamline the Rx buffer allocation and cleanup. This is accomplished by reducing the number of writes by only having the Rx descriptor ring written by software during allocation, and it will only be read during cleanup. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change removes support for single buffer mode from igb and makes the driver function in packet split always. The advantage to doing this is that we can reduce total memory allocation overhead significantly as we will only need to allocate one 1K slab per packet and then make use of a reusable half page instead of allocating a 2K slab per packet. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch modifies the max_frame_size in order account for an optional VLAN tag. In order to support this we must also increase the MAX_STD_JUMBO_FRAME_SIZE to account for the 4 extra bytes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the RXDCTL and TXDCTL configurations and optimizes RX performance by allowing back write-backs on all hardware other than 82576. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 31 8月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 2 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 8月, 2011 2 次提交
-
-
由 Carolyn Wyborny 提交于
This patch fixes a problem where WOL would fail on second port of i350 device. Reported-by: NMartin Wilck <martin.wilck@ts.fujitsu.com> Reported-by: Stefan Assmann<sassmann@redhat.com> Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in drivers/net/igb/igb_main.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igb_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2011 1 次提交
-
-
由 Carolyn Wyborny 提交于
This patch updates the copyright on the igb driver files to 2011. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 28 6月, 2011 1 次提交
-
-
由 Jon Mason 提交于
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 10 6月, 2011 1 次提交
-
-
由 Carolyn Wyborny 提交于
This patch changes the way versioning is done for igb in the kernel by removing the number after the "k." It has been determined that just the "k" is sufficient to identify a kernel version and the following number was used in an inconsistent manner. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 6月, 2011 1 次提交
-
-
由 Williams, Mitch A 提交于
When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to the driver attempting to enable RSS on the PF device, which is not supported by the i350. When max_vfs is specified on an i350 adapter, set the number of RSS queues to 1. This issue affects 2.6.39 as well. CC: stable@kernel.org Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2011 1 次提交
-
-
由 David Decotigny 提交于
This makes sure that one cannot request a 99Mbps full-duplex and get a 100Mbps half-duplex configuration in return due to the way the speed/duplex parameters are handled internally. Tested: e1000 works Signed-off-by: NDavid Decotigny <decot@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2011 1 次提交
-
-
由 Stefan Assmann 提交于
The code for thermal sensor checking should be wrapped into a function. Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 15 3月, 2011 2 次提交
-
-
由 Carolyn Wyborny 提交于
This feature adds messaging to the link status change to notify the user if the device returned from a downshift or power off event due to the Thermal Sensor feature in i350 parts. Feature is only available on internal copper ports. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anders Berggren 提交于
Hardware timestamping for Intel 82580 didn't work in either 2.6.36 or 2.6.37. Comparing it to Intel's igb-2.4.12 I found that the timecounter_init clock/counter initialization was done too early. Signed-off-by: NAnders Berggren <andfers@halon.se> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 3月, 2011 4 次提交
-
-
由 Carolyn Wyborny 提交于
This patch updates igb version to 3.0.6. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch add DMA Coalescing which is a power-saving feature that coalesces DMA writes in order to stay in a low-power state as much as possible. Feature is disabled by default. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch adds functions and functions pointers to accommodate differences between NVM interfaces and options for i350 devices, 82580 devices and the rest. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch adds the EEE feature for i350 devices, enabled by default. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 3月, 2011 1 次提交
-
-
由 Carolyn Wyborny 提交于
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 03 3月, 2011 1 次提交
-
-
由 Stefan Assmann 提交于
Currently there's no warning printed when max_vfs > 7 is specified with igb and the maximum of 7 is silently enforced. This patch prints a warning and informs the user of the actions taken. Signed-off-by: NStefan Assmann <sassmann@redhat.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 2月, 2011 3 次提交
-
-
由 Carolyn Wyborny 提交于
This will synchronize the version with the out of tree driver which shares its functionality. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This fix updates copyright information to include current year 2011. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lior Levy 提交于
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: NLior Levy <lior.levy@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 2月, 2011 1 次提交
-
-
由 Carolyn Wyborny 提交于
This patch adds full support for SR-IOV by enabling the PF side. VF side has already been committed. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 1月, 2011 1 次提交
-
-
由 Carolyn Wyborny 提交于
This patch enables support for Intel i340 Quad Port Fiber Adapter. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 25 12月, 2010 4 次提交
-
-
由 Greg Rose 提交于
Add support for the anti-spoofing feature in the HW. Packets from VF devices with spoofed MAC addresses or VLAN tags will be blocked and an event generated. When the watchdog task runs it will call a function to check if any spoof events occurred. If an event was detected then a warning message is dumped to the system log. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Gasparakis, Joseph 提交于
This patch does the following: 1. Changes the existing supported device id's so now DH89xxCC is not supported when EEPROM is not read. 2. Adds two more device ids for DH89xxCC in backplane mode and SFP. 3. Driver now initializes previously possibly uninitialized value in igb_reset_mdicnfg_82580(). Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Print a warning message to the system log when the VF attempts to override administratively set MAC/VLAN configuration. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The vf flags were being overwritten causing the flag that indicates that the PF has set the VF MAC address to get cleared. This would allow the VF to override the MAC address assigned by the Host VMM using the ip link set command. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-