s/resovle/resolve/
s/broadcase/broadcast/
s/sytem/system/
Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210320194426.21621-1-unixbhaskar@gmail.com

some function's label meaningless, the return statement follows
the goto statement, so just remove it.
Signed-off-by: Nwengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: NSergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210223065754.34392-1-samirweng1979@163.com

The signal strength of 5G is quite low, so user can't connect to an AP far
away. New parameters with new format and its parser are updated by the commit
84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser."), but
some parameters are missing. Use this commit to update to the novel parameters
that use new format.

Fixes: 84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser")
Signed-off-by: NPing-Ke Shih <pkshih@realtek.com>
Tested-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com

Remove the 'wsm_*' typedef as it is not used.
Signed-off-by: NChen Lin <chen.lin5@zte.com.cn>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613449833-4910-1-git-send-email-chen45464546@163.com

Remove the 'cw1200_wsm_handler' typedef as it is not used.
Signed-off-by: NChen Lin <chen.lin5@zte.com.cn>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613446918-4532-1-git-send-email-chen45464546@163.com

Merge tag 'iwlwifi-next-for-kalle-2021-04-12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for v5.13

* Add support for new FTM FW APIs;
* Some CSA fixes;
* Support for new HW family and other HW detection fixes;
* Robustness improvement in the HW detection code;
* One fix in PMF;
* Some new regulatory features;
* Support for passive scan in 6GHz;
* Some improvements in the sync queue implementation;
* Support for new devices;
* Support for a new FW API command version;
* Some locking fixes;
* Bump the FW API version support for AX devices;
* Some other small fixes, clean-ups and improvements.

# gpg: Signature made Wed 14 Apr 2021 12:33:29 PM EEST using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg:                 aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"

mt76 patches for 5.13

* code cleanup
* mt7915/mt7615 decap offload support
* driver fixes
* mt7613 eeprom support
* MCU code unification
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support

# gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900  42EF D77D 141D 02A7 6EF5

Merge tag 'linux-can-next-for-5.13-20210414' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-04-14

this is a pull request of a single patch for net-next/master.

Vincent Mailhol's patch fixes a NULL pointer dereference when handling
error frames in the etas_es58x driver, which has been added in the
previous PR.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

af_packet fanout uses RCU rules to ensure f->arr elements
are not dismantled before RCU grace period.

However, it lacks rcu accessors to make sure KCSAN and other tools
wont detect data races. Stupid compilers could also play games.

Fixes: dc99f600 ("packet: Add fanout support.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: N"Gong, Sishuai" <sishuai@purdue.edu>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some Ethernet switches might only be able to support disabling multicast
snooping globally, which is an issue for example when several bridges
span the same physical device and request contradictory settings.

Propagate the return value of br_mc_disabled_update() such that this
limitation is transmitted correctly to user-space.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-04-13

mlx5 core and netdev driver updates

1) E-Switch updates from Parav,
  1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch
  1.2) Trivial cleanups for E-Switch code
  1.3) Dynamically allocate vport steering namespaces only when required

2) From Jianbo, Use variably sized data structures for Software steering

3) Several minor cleanups
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Normally, the bootloader will already initialize the MAC address
registers of the ENETC and the driver will just use them or generate a
random one, if it is not initialized.

Add a new way to provide the MAC address: via device tree. Besides the
usual 'mac-address' property, there is also the possibility to fetch it
via a NVMEM provider. The sl28 board stores the MAC address in the SPI
NOR flash OTP region. Having this will allow linux to fetch the MAC
address from there without being dependent on the bootloader.

No in-tree boards have the device tree properties set, thus for these,
this is a no-op.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following coccicheck warning:

./drivers/net/ethernet/sfc/enum.h:80:7-28: duplicated argument to |
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the commit 1ddc3229 ("skbuff: remove some unnecessary operation
in skb_segment_list()") introduces an issue very similar to the
one already fixed by commit 53475c5d ("net: fix use-after-free when
UDP GRO with shared fraglist").

If the GSO skb goes though skb_clone() and pskb_expand_head() before
entering skb_segment_list(), the latter  will unshare the frag_list
skbs and will release the old list. With the reverted commit in place,
when skb_segment_list() completes, skb->next points to the just
released list, and later on the kernel will hit UaF.

Note that since commit e0e3070a ("udp: properly complete L4 GRO
over UDP tunnel packet") the critical scenario can be reproduced also
receiving UDP over vxlan traffic with:

NIC (NETIF_F_GRO_FRAGLIST enabled) -> vxlan -> UDP sink

Attaching a packet socket to the NIC will cause skb_clone() and the
tunnel decapsulation will call pskb_expand_head().

Fixes: 1ddc3229 ("skbuff: remove some unnecessary operation in skb_segment_list()")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following clang warning:

drivers/atm/idt77252.c:1787:1: warning: unused function
'idt77252_fbq_level' [-Wunused-function].
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2021-04-14

Not much this time:

1) Simplification of some variable calculations in esp4 and esp6.
   From Jiapeng Chong and Junlin Yang.

2) Fix a clang Wformat warning in esp6 and ah6.
   From Arnd Bergmann.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for the [g|s]et_pauseparam ethtool ops. It considers
that the chip doesn't support pause frame use in jumbo mode.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
10GbE Intel Wired LAN Driver Updates 2021-04-13

This series contains updates to ixgbe and ixgbevf driver.

Jostar Yang adds support for BCM54616s PHY for ixgbe.

Chen Lin removes an unused function pointer for ixgbe and ixgbevf.

Bhaskar Chowdhury fixes a typo in ixgbe.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Synopsis MAC controller supports auxiliary snapshot feature that
allows user to store a snapshot of the system time based on an external
event.

This patch add supports to the above mentioned feature. Users will be
able to triggered capturing the time snapshot from user-space using
application such as testptp or any other applications that uses the
PTP_EXTTS_REQUEST ioctl request.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NTan Tee Min <tee.min.tan@intel.com>
Co-developed-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Bornyakov says:

====================
net: phy: marvell-88x2222: a couple of improvements

First, there are some SFP modules that only uses RX_LOS for link
indication. Add check that link is operational before actual read of
line-side status.

Second, it is invalid to set 10G speed without autonegotiation,
according to phy_ethtool_ksettings_set(). Implement switching between
10GBase-R and 1000Base-X/SGMII if autonegotiation can't complete but
there is signal in line.

Changelog:
  v1 -> v2:
    * make checking that link is operational more friendly for
      trancievers without SFP cages.
    * split swapping 1G/10G modes into non-functional and functional
      commits for the sake of easier review.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setting 10G without autonegotiation is invalid according to
phy_ethtool_ksettings_set(). Thus, we need to set it during
autonegotiation.

If 1G autonegotiation can't complete for quite a time, but there is
signal in line, switch line interface type to 10GBase-R, if supported,
in hope for link to be established.

And vice versa. If 10GBase-R link can't be established for quite a time,
and autonegotiation is enabled, and there is signal in line, switch line
interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if
supported.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No functional changes, just move read link status routines below
autonegotiation configuration to make future functional changes more
distinct.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some SFP modules uses RX_LOS for link indication. In such cases link
will be always up, even without cable connected. RX_LOS changes will
trigger link_up()/link_down() upstream operations. Thus, check that SFP
link is operational before actual read link status.

If there is no SFP cage connected to the tranciever, check only PMD
Recieve Signal Detect register.
Signed-off-by: NIvan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow to create an RQ which is not registered as an XDP RQ. For example:
the trap-RQ doesn't register as an XDP RQ.

Fixes: 869c5f92 ("net/mlx5e: Generalize open RQ")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There should be no spaces at the start of the line.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

void function return statements are not generally useful.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

There should be a blank lines after declarations.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.

Addresses-Coverity: ("Logically dead code")
Fixes: 7dfee4b1 ("net/mlx5: IPsec, Refactor SA handle creation and destruction")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The cmd size is 8K so use kvzalloc().
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

mlx5dr_action is a generally used data structure, and there is an
union for different types of actions in it. The size of mlx5dr_action
is about 72 bytes, but for those actions with fewer fields, most of
the allocated memory is wasted.
Remove this union, and mlx5dr_action becomes a generic action header.
Then actions are dynamically allocated with needed memory, the data
for each action is stored right after the header.
Signed-off-by: NJianbo Liu <jianbol@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

SF's hardware function id is already stored in mlx5_sf. Reuse it,
instead of querying the hw table.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

At many places in the code, device pointer is directly available. Make
use of it, instead of accessing it from the table.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently eswitch flow steering (FS) namespace of vport's ingress and
egress ACL are enabled when FS layer is initialized. This is done even
when eswitch is diabled. This demands that total eswitch ports to be
known to FS layer without eswitch in use.

Given the FS core is not dependent on eswitch, make namespace init and
cleanup routines as helper routines to be invoked only when eswitch is
needed.

With this change, ingress and egress ACL namespaces are created only
when eswitch legacy/offloads mode is enabled.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently eswitch offers two modes. Legacy and offloads.
Offloads code is already in its own file eswitch_offloads.c

However eswitch.c contains the eswitch legacy code and common
infrastructure  code.

To enable future extensions and to better manage generic common eswitch
infrastructure code, move the legacy code to its own legacy.c file.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Convert ESW_ALLOWED macro to a helper routine so that it can be used in
other eswitch files.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Make cleanup sequence mirror of init sequence for cleaning up reps
and freeing vports.

Also when reps initialization fails, there is no need to perform reps
cleanup.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Vport number is 16-bit field in hardware. Make it u16.

Move location of vport in the structure so that it reduces a hole
in the structure.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

With vhca events, SF state is queried through the VHCA events. Device no
longer expects SF bitmap in the query eswitch functions command.

Hence, remove it to simplify the code.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently each packet inserted in eswitch is tagged with a internal
metadata to indicate source vport. Metadata tagging is not always
needed. Metadata insertion is needed for multi-port RoCE, failover
between representors and stacked devices. In many other cases,
metadata enablement is not needed.

Metadata insertion slows down the packet processing rate of the E-switch
when it is in switchdev mode.

Below table show performance gain with metadata disabled for VXLAN
offload rules in both SMFS and DMFS steering mode on ConnectX-5 device.

----------------------------------------------
| steering | metadata | pkt size | rx pps    |
| mode     |          |          | (million) |
----------------------------------------------
| smfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| smfs     | enabled  | 128Bytes | 36        |
----------------------------------------------
| dmfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| dmfs     | enabled  | 128Bytes | 36        |
----------------------------------------------

Hence, allow user to disable metadata using driver specific devlink
parameter. Metadata setting of the eswitch is applicable only for the
switchdev mode.

Example to show and disable metadata before changing eswitch mode:
$ devlink dev param show pci/0000:06:00.0 name esw_port_metadata
pci/0000:06:00.0:
  name esw_port_metadata type driver-specific
    values:
      cmode runtime value true

$ devlink dev param set pci/0000:06:00.0 \
	  name esw_port_metadata value false cmode runtime

$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>
---
changelog:
v1->v2:
 - added performance numbers in commit log
 - updated commit log and documentation for switchdev mode
 - added explicit note on when user can disable metadata in
   documentation

Yoyo based debug is not applicable to old devices.  As init debug is
enabled by default in the driver, it needs to be disabled to work the
old debug mechanism in old devices.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Fixes: b0d8d2c2 ("iwlwifi: yoyo: enable yoyo by default")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>