Read busy counters not holding cc_lock spinlock since usb read can't be
performed in interrupt context. Move cc_active and cc_rx counters out of
cc_lock since they are not modified in interrupt context.
Grab cc_lock updating cur_cc_bss_rx in mt76_airtime_report and do not
hold rx_lock in mt76_update_survey.
Moreover grab mt76 mutex in mt76_get_survey before running
mt76_update_survey. This patch fixes the following 'schedule while
atomic'

[  291.790866] BUG: scheduling while atomic: iw/2161/0x00000202
[  291.791002] Preemption disabled at:
[  291.791007] [<0000000000000000>] 0x0
[  291.791015] CPU: 0 PID: 2161 Comm: iw Tainted: G W 5.4.= 0-rc2-3-ARCH-00104-g9e208aa0 #1
[  291.791017] Hardware name: LENOVO 2349QM6/2349QM6, BIOS G1ETC2WW (2.82=) 08/07/2019
[  291.791019] Call Trace:
[  291.791042]  dump_stack+0x5c/0x80
[  291.791049]  __schedule_bug.cold+0x8e/0x9b
[  291.791055]  __schedule+0x5f8/0x770
[  291.791062]  schedule+0x43/0xd0
[  291.791068]  schedule_preempt_disabled+0x14/0x20
[  291.791074]  __mutex_lock.isra.0+0x18a/0x530
[  291.791099]  mt76u_rr+0x1f/0x40 [mt76_usb]
[  291.791113]  mt76x02_update_channel+0x22/0x40 [mt76x02_lib]
[  291.791122]  mt76_update_survey+0x42/0xe0 [mt76]
[  291.791129]  mt76_get_survey+0x2f/0x1b0 [mt76]
[  291.791170]  ieee80211_dump_survey+0x5e/0x140 [mac80211]
[  291.791217]  nl80211_dump_survey+0x13c/0x2f0 [cfg80211]
[  291.791222]  ? __kmalloc_reserve.isra.0+0x2d/0x70
[  291.791225]  ? __alloc_skb+0x96/0x1d0
[  291.791229]  netlink_dump+0x17b/0x370
[  291.791247]  __netlink_dump_start+0x16f/0x1e0
[  291.791253]  genl_family_rcv_msg+0x396/0x410
[  291.791290]  ? nl80211_prepare_wdev_dump+0x1b0/0x1b0 [cfg80211]
[  291.791297]  ? _raw_spin_unlock_irqrestore+0x20/0x40
[  291.791312]  ? __wake_up_common_lock+0x8a/0xc0
[  291.791316]  genl_rcv_msg+0x47/0x90
[  291.791320]  ? genl_family_rcv_msg+0x410/0x410
[  291.791323]  netlink_rcv_skb+0x49/0x110
[  291.791329]  genl_rcv+0x24/0x40
[  291.791333]  netlink_unicast+0x171/0x200
[  291.791340]  netlink_sendmsg+0x208/0x3d0
[  291.791358]  sock_sendmsg+0x5e/0x60
[  291.791361]  ___sys_sendmsg+0x2ae/0x330
[  291.791368]  ? filemap_map_pages+0x272/0x390
[  291.791374]  ? _raw_spin_unlock+0x16/0x30
[  291.791379]  ? __handle_mm_fault+0x112f/0x1390
[  291.791388]  __sys_sendmsg+0x59/0xa0
[  291.791396]  do_syscall_64+0x5b/0x1a0
[  291.791400]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  291.791404] RIP: 0033:0x7f5d0c7f37b7
[  291.791418] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 0=
0 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05=
 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  291.791421] RSP: 002b:00007ffe8b5d0538 EFLAGS: 00000246 ORIG_RAX: 0000= 00000000002e
[  291.791426] RAX: ffffffffffffffda RBX: 000055a038e6c390 RCX: 00007f5d0= c7f37b7
[  291.791430] RDX: 0000000000000000 RSI: 00007ffe8b5d0570 RDI: 000000000= 0000003
[  291.791434] RBP: 000055a038e718c0 R08: 000055a038e6c02a R09: 000000000= 0000002
[  291.791438] R10: 000055a03808cb00 R11: 0000000000000246 R12: 000055a03= 8e71780
[  291.791440] R13: 00007ffe8b5d0570 R14: 000055a038e717d0 R15: 000055a03= 8e718c0
[  291.791480] NOHZ: local_softirq_pending 202

Fixes: 168aea24 ("mt76: mt76x02u: enable survey support")
Tested-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

mt76x0e driver only supports MAC addresses from
calibration data eeprom. Many routers however do not
have a valid stock address set in this field.

This patch makes it possible to take a MAC address
from OF (e.g. from mtd).
Signed-off-by: NPawel Dembicki <paweldembicki@gmail.com>
[adjusted for kernel submission]
Signed-off-by: NAdrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

if napi_complete() returns false, it means that polling is still pending.
Interrupts should not fire until the polling is no longer scheduled
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Cancel the workqueue after the tid has been cleaned up, in order to
avoid a possible rescheduling from within the work function.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

A rcu read locked section is not allowed to sleep, and the rcu lock here
isn't actually necessary, because we're holding dev->mutex.
Fixes an issue when the tid work item is still running while freeing
a station or stopping the aggregation session
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This is needed primarily to avoid races in dealing with rx aggregation
related data structures
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

With the devm API, the unregister happens after the device cleanup is done,
after which the struct mt76_dev which contains the led_cdev has already been
freed. This leads to a use-after-free bug that can crash the system.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

It is supported by all hardware drivers now
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>

Poll per-station hardware counters available in WTBL after tx/rx
status events in order to report tx/rx airtime to mac80211 layer
Co-developed-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt7615_mac_wtbl_update utility routine in order to update
WTBL update register
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Like on mt7603, MIB status register 16 tracks CCA time, but does not
include tx time. Switch to status register 9 to includ NAV and tx
time as well.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Report tx time/rx time and obss time from hw mib counters to fill survey
info requested by mac80211
Co-developed-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Estimate by calculating duration for EWMA packet size + estimated A-MPDU
length on tx status events
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Reduces code duplication and adds missing bits for USB variants
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Host time is used to calculate the channel active time on mt7603 and mt7615.
Use the same on mt76x02 and move the lock to core code to get rid of some
duplicated code.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

MT_MIB_STAT_PSCCA only counts rx CCA busy time, which does not include
tx time. MT_MIB_STAT_CCA counts full busy time, including Rx, Tx and NAV
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Poll per-station hardware counters after tx status events
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Report total rx airtime for valid stations as BSS rx time in survey

mt7615 is left out for now, it will be supported later by reading
hardware counters instead of calculating airtime in software
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76_channel_state() from mt76.h to mac80211.c
Preparation for updating channel state from more places in the drivers/core
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This reduces the struct size and is useful for adding more flags later
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This can be used in monitor mode to figure out which subframes were sent as
part of which A-MPDU
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

It is no longer used
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11
aggr cumulative statistics
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce ampdu_stat entry in mt7615 debugfs in order to dump 802.11
aggr cumulative statistics
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move aggr_stats array from mt76x02_dev to mt76_dev in order to be reused
adding aggregation stats for mt7603/mt7615 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt7615_queues_read routine to dump hw queue related info.
Add hw ac queues statistics in mt7615 debugfs
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move queue debugfs entry to driver specific code since mt7615 devices
rely on a different queue layout
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the
code is shared between both drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Remove mt76x02_mac_reset_counters from mt76x0_init_hardware since
it will be run starting the device
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of
mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Unify mac_reset_counter routine and move it in mt76x02_lib module
since it is shared by all mt76x02 drivers (pci/usb)
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Enable Smart Carrier Sense algorithm by default in order to improve
performances in a noisy environment
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Don't populate the array mt76x0_chan_map on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   7685	   1192	      0	   8877	   22ad	mediatek/mt76/mt76x0/eeprom.o

After:
   text	   data	    bss	    dec	    hex	filename
   7541	   1256	      0	   8797	   225d	mediatek/mt76/mt76x0/eeprom.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce lockdep_assert_held macro in __mt76u_vendor_request routine
and remove comments regarding usb_ctrl_mtx lock
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Remove empty flag in mt76_txq_schedule_list and mt76_txq_send_burst
since we just need retry_q length to notify mac80211 to reschedule the
current tx queue
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The workqueue item needs to be fully shut down before the struct can be
freed.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

It is unused
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Adjust filters and ensure frames don't get sent to MCU instead of host
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable]

They are introduced by commit e542e66b ("rtl8xxxu:
add bluetooth co-existence support for single antenna"), but never used,
so remove them.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Reviewed-by: NChris Chiu <chiu@endlessm.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

This fixes a minor WARNING in the cfg80211:
[  130.658034] ------------[ cut here ]------------
[  130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211]
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>